Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod

This standard specifies the requirements relating to:
Steel FE-WM1002 (X13Cr13)
Filler metal for welding
Wire and rod
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-WM1002 (X13Cr13) - Schweißzusatz - Draht und Stäbe

Diese Norm legt die Anforderungen an:
Stahl FE-WM1002 (X13Cr13)
Schweißzusatz
Draht und Stäbe
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-WM1002 (X13Cr13) - Métal d'apport de soudage - Fil et baguette

Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod

General Information

Status
Published
Publication Date
31-Dec-2001
ICS
49.025.10 - Steels
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2002
Due Date
01-Jan-2002
Completion Date
01-Jan-2002
Ref Project
EN 4344:2001 - Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod

Overview

EN 4344:2001 is a European aerospace standard (prepared by AECMA and adopted by CEN) that specifies requirements for the filler metal Steel FE‑WM1002 (X13Cr13) in the form of wire and rod for welding in aerospace applications. The standard defines material designation, permitted chemical-element ranges, manufacturing and delivery conditions, and references the technical and qualification procedures required for use in aircraft and space systems.

Key Topics

  • Material designation: Steel FE‑WM1002 (X13Cr13) - identified as an aerospace-series filler metal for welding.
  • Chemical composition: The standard lists the elemental composition and permissible limits (including C, Si, Mn, P, S, Cr, Mo, Ni, Al, Cu, N, Sn and balance Fe).
  • Manufacture and form: Wire and rod forms, produced by cold drawing; air melted method of melting is specified.
  • Delivery condition: Supplied cold drawn and annealed; delivery condition code and use condition are stated in the document.
  • Technical requirements & testing: Mechanical, dimensional and inspection requirements are referenced and largely handled through EN 3879 (technical specification for filler metal) and EN 2043 (product qualification). Specific test methods, heat‑treatment references and inspection items are called out or cross‑referenced rather than fully reproduced.
  • Product qualification: Qualification program and acceptance criteria are to be agreed between manufacturer and purchaser; EN 2043 gives general qualification rules for semi‑finished products.
  • Standard series context: Part of the EN/AECMA aerospace metallic materials series and prepared in accordance with EN 4500‑5 (rules for drafting steel material standards).

Applications

  • Selection and procurement of welding wire and rod for joining X13Cr13 (FE‑WM1002) materials in aerospace structures and components.
  • Technical specification for suppliers and manufacturers of filler metals intended for aircraft/space industry use.
  • Basis for quality, compliance and acceptance criteria during incoming inspection, welding procedure development, and materials certification.
  • Useful to welding engineers, procurement teams, metallurgists, quality managers and certification authorities working in aerospace manufacturing and repair.

Related Standards

  • EN 3879 - Aerospace series: Filler metal for welding - Technical specification (referenced for many test and inspection requirements).
  • EN 2043 - Aerospace series: General requirements for semi‑finished product qualification.
  • EN 4258 - General organization of aerospace metallic material standards.
  • EN 4500‑5 - Rules for drafting and presentation of steel material standards (Part 5).

Keywords: EN 4344:2001, FE‑WM1002, X13Cr13, filler metal for welding, welding wire, welding rod, aerospace standard, EN 3879, EN 2043.

Frequently Asked Questions

SIST EN 4344:2002 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod". This standard covers: This standard specifies the requirements relating to: Steel FE-WM1002 (X13Cr13) Filler metal for welding Wire and rod for aerospace applications.

This standard specifies the requirements relating to: Steel FE-WM1002 (X13Cr13) Filler metal for welding Wire and rod for aerospace applications.

SIST EN 4344:2002 is classified under the following ICS (International Classification for Standards) categories: 49.025.10 - Steels. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 4344:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rodLuft- und Raumfahrt - Stahl FE-WM1002 (X13Cr13) - Schweißzusatz - Draht und StäbeSérie aérospatiale - Acier FE-WM1002 (X13Cr13) - Métal d'apport de soudage - Fil et baguetteAerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 4344:2001SIST EN 4344:2002en01-januar-2002SIST EN 4344:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4344June 2001ICS 49.025.10English versionAerospace series - Steel FE-WM1002 (X13Cr13) - Filler metalfor welding - Wire and rodSérie aérospatiale - Acier FE-WM1002 (X13Cr13) - Métald'apport de soudage - Fil et baguetteLuft- und Raumfahrt - Stahl FE-WM1002 (X13Cr13) -Schweißzusatz - Draht und StäbeThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4344:2001 ESIST EN 4344:2002

Page 2EN 4344:2001ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2001, and conflicting national standards shall bewithdrawn at the latest by December 2001.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech R
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...