iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 850:1999

(Main)

Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use

Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use

This European Standard applies to pin-index, yoke-type valve outlet connections for medical use, up to a maximum working pressure of 250 bar at 15 °C. These connections are for use with medical gas cylinders of water capacity below 5 l, for patient care, including therapeutic, diagnostic and prophylactic applications, in hospitals and for emergency treatment. It specifies: - basic dimensions; - requirements for alternative designs of pin-index, yoke-type valve connections; - dimension and positions for the holes and pins for the outlet connections for certain gases and gas mixtures.

Ortsbewegliche Gasflaschen - Ventilseitenstutzen mit Anschlußbügel nach dem Pin-index-System für medizinische Anwendung

Diese Europäische Norm gilt für Bügelverschlüsse nach dem Pin-Index System für die medizinische Anwendung, mit einem maximalen Fülldruck von 250 bar bei 15 °C. Diese Verschlüsse gelten für den medizinischen Gebrauch von Gasflaschen  mit weniger als 5 l Inhalt für die Krankenpflege, einschließlich therapeutischer, diagnostischer und prophylaktischer Anwendung, in Krankenhäusern und für Notfälle. Sie bestimmt: - Grundmaße; - Anforderungen für alternative Konstruktionen von Bügelventilverschlüssen; - Maße und Anordnungen der Paßlöcher und -stifte für die Auslaßverbindungen.

Bouteilles a gaz transportables - Raccords de sortie de robinets du type a étrier avec ergots de sécurité pour usage médical

Cette norme européenne s'applique aux raccords de sorties de robinets du type a étrier avec ergots de sécurité pour usage médical jusqu'a une pression de service maximale de 250 bar a 15 °C. Ces raccords de sorties sont utilisés pour les bouteilles a gaz médicaux, de contenance en eau inférieure a 5 l et, utilisés pour des soins aux malades comportant des applications thérapeutiques, diagnostiques et prophylactiques, dans les hôpitaux et pour les traitements d'urgence. Elle prescrit: - leurs dimensions de base.

Plinske jeklenke - Objemni nastavki ventila s sistemom pin-index za uporabo v medicini

General Information

Status
Withdrawn
Publication Date
31-Dec-1998
Withdrawal Date
30-Sep-2005
ICS
23.020.35 - Gas cylinders
23.060.40 - Pressure regulators
Technical Committee
TLP - Pressure vessels
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Oct-2005
Due Date
01-Oct-2005
Completion Date
01-Oct-2005
Ref Project
EN 850:1996 - Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use

Relations

Amended By
SIST EN 850:1999/A1:2002 - Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use
Effective Date
22-Dec-2008
Corrected By
SIST EN 850:1999/AC:1999 - Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use
Effective Date
22-Dec-2008
Replaced By
SIST EN ISO 407:2005 - Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2004)
Effective Date
01-Oct-2005

Buy Standard

EN 850:1999EN 850:1999
PreviousNext
Standard
EN 850:1999
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 850:1999
01-januar-1999
Plinske jeklenke - Objemni nastavki ventila s sistemom pin-index za uporabo v
medicini
Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical
use
Ortsbewegliche Gasflaschen - Ventilseitenstutzen mit Anschlußbügel nach dem Pin-
index-System für medizinische Anwendung
Bouteilles a gaz transportables - Raccords de sortie de robinets du type a étrier avec
ergots de sécurité pour usage médical
Ta slovenski standard je istoveten z: EN 850:1996
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
SIST EN 850:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 850:1999

---------------------- Page: 2 ----------------------

SIST EN 850:1999

---------------------- Page: 3 ----------------------

SIST EN 850:1999

---------------------- Page: 4 ----------------------

SIST EN 850:1999

---------------------- Page: 5 ----------------------

SIST EN 850:1999

---------------------- Page: 6 ----------------------

SIST EN 850:1999

---------------------- Page: 7 ----------------------

SIST EN 850:1999

---------------------- Page: 8 ----------------------

SIST EN 850:1999

---------------------- Page: 9 ----------------------

SIST EN 850:1999

---------------------- Page: 10 ----------------------

SIST EN 850:1999

---------------------- Page: 11 ----------------------

SIST EN 850:1999

---------------------- Page:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 407:2023(Main)
Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2023)
EN ISO 407:2023

This document is applicable to pin-index yoke-type valve connections for medical gas cylinders, with a working pressure up to a maximum of 200 bar or test pressure up to a maximum of 300 bar, or both.
NOTE 1    This type of connection is primarily used for small cylinders (5 l or below).
NOTE 2    In this document the unit bar is used, due to its universal use in the field of technical gases. It should, however, be noted that bar is not an SI unit, and that the corresponding SI unit for pressure is Pa (1 bar = 105 Pa = 105 N/m2).
This document specifies:
—    basic dimensions;
—    requirements for alternative designs of the yoke-type valve connections;
—    dimensions and positions for the holes and pins for the outlet connections.
It also specifies the dimensions and positions for the holes and pins for the outlet connections for gases and gas mixtures.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14912:2022(Main)
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
EN 14912:2022

This European Standard specifies the requirements for inspection and maintenance of LPG cylinder valves, either manually operated or self-closing, for reuse. It applies when the valve is either inspected or refurbished at the time of periodic inspection of the cylinder.
This European Standard may also be applied at any other time, for example, when maintenance of the valve is necessary.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14246:2022(Main)
Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO 14246:2022)
EN ISO 14246:2022

This document specifies the procedures and acceptance criteria for manufacturing tests and
examinations (sometimes called "initial inspection and tests") of valves designed and type tested in
accordance with ISO 10297.
This document is applicable to:
a) cylinder valves intended to be fitted to refillable transportable gas cylinders;
b) main valves (excluding ball valves) for cylinder bundles;
c) cylinder valves or main valves with integrated pressure regulator (VIPR);
d) valves for pressure drums and tubes.
NOTE Where there is no risk of ambiguity, cylinder valves, main valves, VIPR and valves for pressure drums
and tubes are addressed with the collective term “valves” within this document.
The principles of these manufacturing tests and examinations can be beneficially applied to cylinder
valves type tested to national or International Standards other than ISO 10297.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14245:2021(Main)
Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2021)
EN ISO 14245:2021

This document specifies the requirements for design, specification, type testing and production testing
and inspection for dedicated LPG self-closing cylinder valves for use with and directly connected to
transportable refillable LPG cylinders.
It also includes requirements for associated equipment for vapour and liquid service. Bursting discs
and/or fusible plugs are not covered in this document.
Annex A identifies requirements for production testing and inspection.
This document excludes other LPG cylinder devices which are not an integral part of the dedicated selfclosing
cylinder valve.
This document does not apply to cylinder valves for fixed automotive installations and ball valves.
NOTE For manually operated LPG cylinder valves see ISO 15995. For cylinder valves for compressed,
dissolved and other liquefied gases see ISO 10297, ISO 17871 or ISO 17879.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15995:2021(Main)
Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2021)
EN ISO 15995:2021

This document specifies the requirements for design, specification, type testing and production testing
and inspection of dedicated LPG manually operated cylinder valves for use with and directly connected
to transportable refillable LPG cylinders.
It also includes requirements for associated equipment for vapour and liquid service. Bursting discs
and/or fusible plugs are not covered in this document.
Annex B identifies requirements for production testing and inspection.
This document excludes other LPG cylinder devices which are not an integral part of the dedicated
manually operated cylinder valve.
This document does not apply to cylinder valves for fixed automotive installations and ball valves.
NOTE For self-closing LPG cylinder valves see ISO 14245. For cylinder valves for compressed, dissolved and
other liquefied gases see ISO 10297,[2] ISO 17871[6] or ISO 17879[7].

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13953:2021(Main)
LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
EN 13953:2020

This European Standard specifies the design, testing and marking requirements for spring loaded pressure relief valves (PRV), for use in liquefied petroleum gas (LPG) cylinders.
These PRVs can be either an integral part of a cylinder valve (see EN ISO 14245 [3] and EN ISO 15995 [4]) or a separate device.
This European Standard does not exclude the use of other designs of pressure relief devices that provide a similar level of safety.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17871:2020(Main)
Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)
EN ISO 17871:2020

This document, in conjunction with ISO 10297 and ISO 14246, specifies design, type testing, marking
and manufacturing tests, and examinations requirements for quick-release cylinder valves intended to
be fitted to refillable transportable gas cylinders, pressure drums and tubes which convey:
— non-toxic;
— non-oxidizing;
— non-flammable; and
— non-corrosive;
compressed or liquefied gases or extinguishing agents charged with compressed gases to be used for
fire-extinguishing, explosion protection, and rescue applications.
NOTE 1 The main application of such quick-release cylinder valves is in the fire-fighting industry. However,
there are other applications such as avalanche airbags, life raft inflation and similar applications.
NOTE 2 Where there is no risk of ambiguity, gas cylinders, pressure drums and tubes are addressed with the
collective term “cylinders” within this document.
This document covers the function of a quick-release cylinder valve as a closure.
This document does not apply to quick-release cylinder valves for cryogenic equipment and for liquefied
petroleum gas (LPG).
This document does not apply to quick-release cylinder valves if used as the main closure of portable
fire extinguishers because portable fire extinguishers are not covered by transport regulation.
Quick-release cylinder valves of auxiliary refillable propellant gas cylinders used within or as part of
portable fire extinguishers are covered by this document, if these cylinders are transported separately,
e.g. for filling (see UN Model Regulations, Chapter 3.3, Special Provision 225, second note[1]).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11114-1:2020(Main)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)
EN ISO 11114-1:2020

This document provides requirements for the selection of safe combinations of metallic cylinder and
valve materials and cylinder gas content.
The compatibility data given is related to single gases and to gas mixtures.
Seamless metallic, welded metallic and composite gas cylinders and their valves, used to contain
compressed, liquefied and dissolved gases are considered.
NOTE In this document the term “cylinder” refers to transportable pressure receptacles, which also include
tubes and pressure drums.
Aspects such as the quality of delivered gas product are not considered.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15202:2020(Main)
LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
EN 15202:2019

This European Standard specifies basic connection dimensions of LPG cylinder valves (manufactured in accordance with EN ISO 14245 and EN ISO 15995) and connectors (including pressure regulators) to enable them to be safely connected together.
NOTE 1   Figure 1 (type G.1) to Figure 19 (type G.33) give the types of threaded outlet connections.
NOTE 2   Figure 20 (type G.50) to Figure 34 (type G.66) give the types of non-threaded outlet connections.
This European Standard lists potentially unsafe connections where it may be possible to connect together, but which, when connected, may not be sound or secure in some operating conditions or orientations.
This European Standard specifies a marking system that is intended to ensure that only valves and connecters that are marked with the same connector type number are used in combination.
This European Standard also recommends tightening torques for the attachment of screwed metal-to-metal connections.
Quality assurance systems, production testing and particularly certificates of conformity are not covered in this standard.
This European Standard excludes connections for automotive vehicles covered by UN/ECE Regulation No. 67 Part 1 and EN 13760.
This European Standard excludes connections for gas cartridges covered by EN 417.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17879:2018(Main)
Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017)
EN ISO 17879:2017

This document specifies the design, type testing, marking and manufacturing tests and examinations
requirements for self-closing cylinder valves intended to be fitted to refillable transportable gas
cylinders which convey compressed, liquefied or dissolved gases.
NOTE 1 The main applications for such self-closing cylinder valves are in the calibration gas and beverage
industries.
This document covers the function of a self-closing cylinder valve as a closure.
NOTE 2 Requirements for standard cylinder valves are given in ISO 10297. Requirements for quick-release
cylinder valves are given in ISO 17871.
This document is not applicable to self-closing cylinder valves for cryogenic equipment, for portable fire
extinguishers, or for liquefied petroleum gas (LPG).
NOTE 3 Requirements for valves for cryogenic vessels are specified in ISO 21011 and at a regional level, for
example, in EN 1626. Requirements for valves for portable fire extinguishers at a regional level are specified, for
example, in EN 3 series. Requirements for self-closing LPG cylinder valves are specified in ISO 14245.
NOTE 4 Additional requirements for pressure-relief devices might be specified in international/regional
regulations/standards.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day