SIST EN IEC 61280-4-2:2024
(Main)Fibre-optic communication subsystem test procedures - Part 4-2: Installed cabling plant - Single-mode attenuation and optical return loss measurements (IEC 61280-4-2:2024)
Fibre-optic communication subsystem test procedures - Part 4-2: Installed cabling plant - Single-mode attenuation and optical return loss measurements (IEC 61280-4-2:2024)
IEC 61280-4-2:2024 is available as IEC 61280-4-2:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62180-4-2:2024 is applicable to the measurements of attenuation and optical return loss of an installed optical fibre cabling plant using single-mode fibre. This cabling plant can include single-mode optical fibres, connectors, adapters, splices, and other passive devices. The cabling can be installed in a variety of environments including residential, commercial, industrial and data centre premises, as well as outside plant environments. This document is applicable to all single-mode fibre types including those designated by IEC 60793-2-50 as Class B fibres. The principles of this document can be applied to cabling plants containing branching devices (splitters) and at specific wavelength ranges in situations where passive wavelength selective components are deployed, such as WDM, CWDM and DWDM devices. This document is not intended to apply to cabling plants that include active devices such as fibre amplifiers or dynamic channel equalizers. This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of the equipment cord method;
b) addition of test limit adjustment related to test cord grades;
c) refinements on measurement uncertainties.
Prüfverfahren für Lichtwellenleiter-Kommunikationsuntersysteme - Teil 4-2: Installierte Kabelanlagen - Einmoden-Dämpfungs- und optische Rückflussdämpfungsmessung (IEC 61280-4-2:2024)
Procédures d’essai des sous-systèmes de télécommunication fibroniques - Partie 4-2: Installations câblées - Mesure de l'affaiblissement de réflexion optique et de l'affaiblissement des fibres unimodales (IEC 61280-4-2:2024)
IEC 61280-4-2:2024 est disponible sous forme de IEC 61280-4-2:2024 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 61280-4-2:2024 s’applique aux mesures de l’affaiblissement et de l’affaiblissement de réflexion optique d’une installation câblée à fibres optiques utilisant des fibres unimodales. Cette installation câblée peut inclure des fibres optiques unimodales, des connecteurs, des adaptateurs, des épissures et d’autres dispositifs passifs. Le câblage peut être installé dans une diversité d’environnements, notamment dans des locaux résidentiels, commerciaux ou industriels et des centres de traitement de données, ainsi que dans des environnements d’installations extérieures. Le présent document s’applique à tous les types de fibres unimodales, y compris celles désignées comme des fibres de Classe B par l’IEC 60793-2-50. Les principes du présent document peuvent s’appliquer aux installations câblées contenant des dispositifs de commutation (répartiteurs) et sur des plages de longueurs d’onde spécifiques, dans des situations dans lesquelles sont déployés des composants passifs sélectifs en longueurs d’onde, par exemple des dispositifs WDM, CWDM et DWDM. Le présent document n’est pas destiné à s’appliquer à des installations câblées qui incluent des dispositifs actifs tels que des amplificateurs à fibres ou des égaliseurs de canaux de transmission dynamiques. Cette troisième édition annule et remplace la deuxième édition parue en 2014. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a) ajout de la méthode des cordons d’équipement;
b) ajout de l’ajustement de limite d’essai lié aux classes de cordons d’essai;
c) affinements des incertitudes de mesure.
Postopki za preskušanje optičnih komunikacijskih podsistemov - 4-2. del: Kabelska inštalacija - Meritve slabljenja v enorodovnih vlaknih in optičnih povratnih izgub (IEC 61280-4-2:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61280-4-2:2024
01-september-2024
Postopki za preskušanje optičnih komunikacijskih podsistemov - 4-2. del:
Kabelska inštalacija - Meritve slabljenja v enorodovnih vlaknih in optičnih
povratnih izgub (IEC 61280-4-2:2024)
Fibre-optic communication subsystem test procedures - Part 4-2: Installed cabling plant -
Single-mode attenuation and optical return loss measurements (IEC 61280-4-2:2024)
Prüfverfahren für Lichtwellenleiter-Kommunikationsuntersysteme - Teil 4-2: Installierte
Kabelanlagen - Einmoden-Dämpfungs- und optische Rückflussdämpfungsmessung (IEC
61280-4-2:2024)
Procédures d’essai des sous-systèmes de télécommunication fibroniques - Partie 4-2:
Installations câblées - Mesure de l'affaiblissement de réflexion optique et de
l'affaiblissement des fibres unimodales (IEC 61280-4-2:2024)
Ta slovenski standard je istoveten z: EN IEC 61280-4-2:2024
ICS:
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
SIST EN IEC 61280-4-2:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61280-4-2:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 61280-4-2:2024
EUROPEAN STANDARD EN IEC 61280-4-2
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2024
ICS 33.180.01 Supersedes EN 61280-4-2:2014
English Version
Fibre-optic communication subsystem test procedures - Part 4-2:
Installed cabling plant - Single-mode attenuation and optical
return loss measurements
(IEC 61280-4-2:2024)
Procédures d'essai des sous-systèmes de Prüfverfahren für Lichtwellenleiter-
télécommunication fibroniques - Partie 4-2: Installations Kommunikationsuntersysteme - Teil 4-2: Installierte
câblées - Mesures de l'affaiblissement de réflexion optique Kabelanlagen - Einmoden-Dämpfungs- und optische
et de l'affaiblissement des fibres unimodales Rückflussdämpfungsmessung
(IEC 61280-4-2:2024) (IEC 61280-4-2:2024)
This European Standard was approved by CENELEC on 2024-06-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61280-4-2:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61280-4-2:2024
EN IEC 61280-4-2:2024 (E)
European foreword
The text of document 86C/1912/FDIS, future edition 3 of IEC 61280-4-2, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 61280-4-2:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-03-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-06-10
document have to be withdrawn
This document supersedes EN 61280-4-2:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61280-4-2:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added f
...
SLOVENSKI STANDARD
oSIST prEN IEC 61280-4-2:2023
01-september-2023
Postopki za preskušanje optičnih komunikacijskih podsistemov - 4-2. del:
Kabelska inštalacija - Meritve slabljenja v enorodovnih vlaknih in optičnih
povratnih izgub
Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant -
Single-mode attenuation and optical return loss measurement
Prüfverfahren für Lichtwellenleiter-Kommunikationsuntersysteme - Teil 4-2: Installierte
Kabelanlagen - Einmoden-Dämpfungs- und optische Rückflussdämpfungsmessung
Procédures d'essai des sous-systèmes de télécommunication à fibres optiques - Partie 4
-2: Installations câblées - Mesure de l'affaiblissement de réflexion optique et de
l'affaiblissement des fibres unimodales
Ta slovenski standard je istoveten z: prEN IEC 61280-4-2:2023
ICS:
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
oSIST prEN IEC 61280-4-2:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61280-4-2:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61280-4-2:2023
86C/1876/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61280-4-2 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-07-21 2023-10-13
SUPERSEDES DOCUMENTS:
86C/1852/CD, 86C/1865A/CC
IEC SC 86C : FIBRE OPTIC SYSTEMS AND ACTIVE DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Fred Heismann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 86A,SC 86B
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In So me
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-
mode attenuation and optical return loss measurement
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61280-4-2:2023
IEC CDV 61280-4-2/Ed3 © IEC 2023 – 2 – 86C/1876/CDV
1 CONTENTS
2
3 FOREWORD . 8
4 INTRODUCTION . 10
5 1 Scope . 11
6 2 Normative references . 11
7 3 Terms, definitions, graphical symbols, and abbreviated terms . 11
8 3.1 Terms and definitions . 12
9 3.2 Graphical symbols . 14
10 3.3 Abbreviated terms . 16
11 4 Measurement methods . 16
12 4.1 General . 16
13 4.1.1 Document structure . 16
14 4.1.2 Attenuation .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.