SIST EN 301 489-24 V1.3.1:2006
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment
- Abstract
The present document, together with EN 301 489-1 [1], covers the assessment of "3 rd generation" digital cellular (IMT-2000 CDMA Direct Spread) (UTRA) mobile and portable (UE) radio terminal equipment and associated ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria of "3 rd generation" digital cellular (IMT-2000 CDMA Direct Spread) (UTRA) mobile and portable (UE) radio terminal equipment and associated ancillary equipment. Examples of digital cellular mobile and portable radio equipment covered by the present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. Base station (BS) equipment operating within network infrastructure is outside the scope of the present document. However, the present document does cover mobile and portable equipment that is intended to be operated in a fixed location while connected to the AC mains (see clause 5.5). The environment classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document.
- Status
- Published
- Publication Date
- 28-Feb-2006
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Mar-2006
- Due Date
- 01-Mar-2006
- Completion Date
- 01-Mar-2006
SIST EN 301 489-24 V1.3.1:2006 is the Slovenian adoption of ETSI EN 301 489-24 V1.3.1 for electromagnetic compatibility of IMT-2000 CDMA Direct Spread (UTRA) mobile and portable User Equipment (UE) radio and ancillary equipment. It specifies the test conditions, performance assessment methods and performance criteria used to check EMC for 3rd generation UTRA terminals. Engineers, test laboratories, manufacturers and conformity assessors use it when they need a clear test basis for UMTS/UTRA UE equipment.
What does SIST EN 301 489-24 V1.3.1:2006 specify?
SIST EN 301 489-24 V1.3.1:2006 specifies how to assess the EMC of 3rd generation digital cellular IMT-2000 CDMA Direct Spread (UTRA) mobile and portable UE radio terminal equipment and associated ancillary equipment. It is the product-specific part of the ETSI EMC series for these terminals, and it works together with EN 301 489-1 for the common technical requirements.
The document is organized into seven clauses and five annexes:
- Clause 1 covers scope.
- Clause 2 lists references.
- Clause 3 gives definitions and abbreviations.
- Clause 4 sets test conditions.
- Clause 5 covers performance assessment.
- Clause 6 gives performance criteria.
- Clause 7 gives applicability overview tables.
| Annex | What it covers |
|---|---|
| Annex A | Examples of mobile and portable radio equipment and ancillary equipment within scope |
| Annex B | Normative performance assessment for voice call audio breakthrough |
| Annex C | Normative performance assessment for data transfer call error ratios |
| Annex D | Bibliography |
| Annex E | EN title in the official languages |
The scope ties the document to UE and associated ancillary equipment. Base station equipment within network infrastructure is outside scope, and antenna-port and enclosure-port spectrum matters are handled by the relevant product standards rather than here.
What are the key requirements of SIST EN 301 489-24 V1.3.1:2006?
SIST EN 301 489-24 V1.3.1:2006 defines the practical EMC test setup for UTRA UE and then adds product-specific rules for call state, signal routing, exclusion bands and pass/fail assessment. In practice, the document tells a test house what state the terminal must be in, how to connect it, and what counts as acceptable behaviour during and after exposure.
Test conditions and operating modes
Clause 4 requires the EN 301 489-1 test conditions to be used as the baseline, with the additional conditions in this part applied where needed. If the equipment has a detachable antenna, it is tested with the antenna fitted in a way that reflects normal intended use. This matters because EMC behaviour can change with the intended antenna arrangement.
Clause 4.2 requires a communication link to be established using a suitable base station simulator, called the test system. The EUT is tested in two modes: traffic mode with a communication link, and idle mode without an active RRC connection. This distinction matters because the transmitter and receiver can behave differently when the terminal is carrying traffic versus waiting for paging.
Call setup and signal arrangements
For traffic mode, the document calls for the generic call setup procedure and specific UMTS operating conditions, including continuous power-control commands, disabled DTX and enabled Inner Loop Power Control. For idle mode, the UE is camped on a cell, performs Location Registration before the test, and uses an empty neighbour list with the shortest paging and DRX cycle. That means the test must represent both active service and standby behaviour.
Clause 4.2.2 and 4.2.3 define how wanted signals are applied for transmitters and receivers, depending on whether the equipment has an external 50 ohm RF antenna connector or an integral antenna. For immunity testing, the wanted signal must keep the link stable; for emission testing, the receiver input must stay within its operating range. This prevents the EMC test from being distorted by a bad radio link or an overloaded measuring receiver.
Exclusion bands and narrow band responses
Clause 4.3 defines transmitter and receiver exclusion bands for the EMC assessment. The transmitter exclusion band is tied to the carrier, and the receiver exclusion band is defined around the allocated receiver band for UTRA/FDD and UTRA/TDD. In practice, this tells the tester which frequencies are part of the intended radio function and which are examined as EMC phenomena.
Clause 4.4 explains how to handle narrow band responses on receivers. If a deviation appears during an immunity test, the test is repeated with the UARFCN shifted, to determine whether the effect is a receiver response or a true wideband EMC problem. If the behaviour follows the shifted UARFCN, it is treated as a narrow band response and disregarded; if it remains, it is treated as an EMC failure. This avoids rejecting equipment for normal receiver selectivity effects.
Voice and data performance assessment
Clause 4.5 separates voice-call and data-transfer assessment. Voice tests are run without external modulation input, after audio calibration, and data tests use an external modulation input so that the data call can be monitored. Annex B and Annex C provide the detailed assessment methods. That matters because voice and data services fail in different ways and need different measurement setups.
Clause 5 says ancillary equipment is tested together with a UE, and compliance is shown against the relevant clauses of this document. Clause 6 then requires the communication link to be maintained during exposure and for the EUT to recover with no loss of user control functions or stored data at the end of testing. For data transfer, the acceptable metric is BER or BLER; for speech, the output level is compared against the recorded reference level. The document also requires idle-mode testing so the transmitter does not start unintentionally.
Applicability tables and special immunity conditions
Clause 7 points the reader to EN 301 489-1 for the general applicability of emission and immunity measurements, then adds special conditions for this product family. For RF field and common-mode immunity tests, the special conditions call for an unmodulated signal first, followed by modulation when using the max-hold detector method. The document also states that narrowband-response identification does not apply to conducted immunity tests in the stated frequency range, and that certain pulse tests use the transient performance criteria from Clause 6.2.
What terms does SIST EN 301 489-24 V1.3.1:2006 define?
- User Equipment (UE) - A mobile station entity that accesses UTRA services through one or more radio interfaces, and it may be stationary or moving.
- Universal Terrestrial Radio Access (UTRA) - The radio access network used by the 3G system covered by this standard.
- Radio Resource Control (RRC) - The connection state that distinguishes traffic mode from idle mode.
- Bit Error Ratio (BER) - A data error metric used to judge whether a data call stays within the allowed limit during testing.
- Block Error Ratio (BLER) - A block-level error metric based on transport blocks and CRC checks.
- Data application ancillary - Ancillary equipment that provides send and/or receive data access to UMTS services via the UE.
- Camped on a cell - The UE is in idle mode, has completed cell selection or reselection, and monitors system and paging information.
- Traffic mode - The UE is switched on and has an RRC connection established.
Who uses SIST EN 301 489-24 V1.3.1:2006?
SIST EN 301 489-24 V1.3.1:2006 is used by manufacturers of UMTS/UTRA mobile and portable terminals, and by makers of related ancillary equipment, when they need to design or verify EMC performance. Test laboratories use it to set up immunity and emission tests, choose the correct traffic or idle mode, and apply the voice or data assessment method.
Quality managers, compliance teams and certification bodies use it to decide whether a UE configuration belongs in scope and how to record the result in a test report. Buyers and technical specifiers use it when they need a clear EMC reference for 3rd generation radio terminal equipment.
What changed in SIST EN 301 489-24 V1.3.1:2006 from the previous edition?
This edition corresponds to ETSI EN 301 489-24 V1.3.1, published in June 2005. The document history also lists earlier publications V1.2.1 from November 2002 and V1.1.1 from September 2001.
Which standards are used with SIST EN 301 489-24 V1.3.1:2006?
- EN 301 489-1 - Provides the common technical requirements, general test clauses, and the baseline emission and immunity tables used by this part.
- ETSI TS 125 101 - Gives UE radio transmission and reception requirements for FDD and provides the reference sensitivity level used in tests.
- ETSI TS 125 102 - Gives UE radio transmission and reception requirements for TDD and provides the reference sensitivity level used in tests.
- ETSI TS 134 108 - Provides common test environments for UE conformance testing, including call setup support.
- ETSI TS 134 109 - Provides the terminal logical test interface and special conformance testing functions, including BER and BLER loop scenarios.
- ETSI TR 125 990 and ETSI TR 121 905 - Provide UMTS vocabulary and terminology used by the document.
- ETSI ETR 027 and ITU-T Recommendation P.64 / P.76 - Support the audio calibration and acoustic measurement methods in Annex B.
What does the SIST EN 301 489-24 V1.3.1:2006 document contain?
The document contains the EMC test framework for UTRA UE, including setup rules for wanted RF signals, antenna arrangements, call states and exclusion bands. It also contains the pass/fail logic for narrow band responses and for continuous and transient phenomena.
Annex B gives the voice-call audio breakthrough method, with calibration and measurement set-ups shown in figures for portable equipment. Annex C gives the data transfer error-ratio method, including BER, BLER and End-User data approaches, plus test set-ups for EUT with and without data application ancillary.
Clause 7 and Table 1 summarize where the general emission and immunity measurements from EN 301 489-1 apply and where special product conditions override them. The annexes and figures are there to help labs build the test configuration, calibrate the audio path, and assess data integrity during EMC exposure.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 301 489-24 V1.3.1:2006 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment". This standard covers: The present document, together with EN 301 489-1 [1], covers the assessment of "3 rd generation" digital cellular (IMT-2000 CDMA Direct Spread) (UTRA) mobile and portable (UE) radio terminal equipment and associated ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria of "3 rd generation" digital cellular (IMT-2000 CDMA Direct Spread) (UTRA) mobile and portable (UE) radio terminal equipment and associated ancillary equipment. Examples of digital cellular mobile and portable radio equipment covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. Base station (BS) equipment operating within network infrastructure is outside the scope of the present document. However, the present document does cover mobile and portable equipment that is intended to be operated in a fixed location while connected to the AC mains (see clause 5.5). The environment classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document.
The present document, together with EN 301 489-1 [1], covers the assessment of "3 rd generation" digital cellular (IMT-2000 CDMA Direct Spread) (UTRA) mobile and portable (UE) radio terminal equipment and associated ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria of "3 rd generation" digital cellular (IMT-2000 CDMA Direct Spread) (UTRA) mobile and portable (UE) radio terminal equipment and associated ancillary equipment. Examples of digital cellular mobile and portable radio equipment covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. Base station (BS) equipment operating within network infrastructure is outside the scope of the present document. However, the present document does cover mobile and portable equipment that is intended to be operated in a fixed location while connected to the AC mains (see clause 5.5). The environment classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document.
SIST EN 301 489-24 V1.3.1:2006 is classified under the following ICS (International Classification for Standards) categories: 33.060.20 - Receiving and transmitting equipment; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 301 489-24 V1.3.1:2006 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, TRRTP124; Standardization Mandates: M/284, T-353. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 301 489-24 V1.3.1:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2006
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) –
Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve – 24.
del: Posebni pogoji za mobilno in prenosno (UE) radijsko in pomožno opremo po
standardu IMT-2000 s CDMA (kodno porazdeljenim sodostopom) in neposredno
modulacijo po razpršenem spektru (“Direct Spread”) (UTRA – prizemni dostop do
UMTS)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 24: Specific
conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio
and ancillary equipment
Ta slovenski standard je istoveten z: EN 301 489-24 Version 1.3.1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
Final draft ETSI EN 301 489-24 V1.3.1 (2005-06)
Candidate Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard
for radio equipment and services;
Part 24: Specific conditions for IMT-2000 CDMA
Direct Spread (UTRA) for Mobile and
portable (UE) radio and ancillary equipment
2 Final draft ETSI EN 301 489-24 V1.3.1 (2005-06)
Reference
REN/ERM-EMC-245-24
Keywords
EMC, IMT-2000, radio, regulation, terminal,
UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2005.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 Final draft ETSI EN 301 489-24 V1.3.1 (2005-06)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.8
4 Test conditions.8
4.1 General.8
4.2 Arrangements for test signals .8
4.2.1 Arrangements for test signals at the input of transmitters.9
4.2.2 Arrangements for test signals at the output of transmitters.9
4.2.3 Arrangements for test signals at the input of receivers .9
4.2.4 Arrangements for test signals at the output of receivers .10
4.3 Exclusion bands.10
4.3.1 Transmitter exclusion band.10
4.3.2 Receiver exclusion band .10
4.4 Narrow band responses on receivers .10
4.5 Normal test modulation.10
5 Performance assessment.11
5.1 General.11
5.2 Equipment which can provide a continuous communication link .11
5.3 Equipment which does not provide a communication link.11
5.4 Ancillary equipment.11
5.5 Equipment classification.11
6 Performance criteria.11
6.1 Performance criteria for continuous phenomena.12
6.2 Performance criteria for Transient phenomena .12
7 Applicability overview tables.12
7.1 Emission.12
7.1.1 General.12
7.1.2 Special conditions.12
7.2 Immunity.12
7.2.1 General.12
7.2.2 Special conditions.13
Annex A (informative): Examples of mobile and portable radio and ancillary equipment for
digital cellular radio telecommunications systems within the scope of
the present document.14
A.1 Mobile and portable radio equipment, and ancillary equipment for the IMT-2000 CDMA Direct
Spread (UTRA) .14
Annex B (normative): Performance assessment voice call. Audio breakthrough.15
B.1 Calibration of audio levels .15
B.2 Measurement of audio levels.16
Annex C (normative): Performance assessment of data transfer call. Error Ratios .17
C.1 Calibration of data transfer.17
C.2 Derivation of Error Ratios.17
ETSI
4 Final draft ETSI EN 301 489-24 V1.3.1 (2005-06)
C.3 EUT without data application ancillary.18
C.4 EUT with data application ancillary.18
Annex D (informative): Bibliography.19
Annex E (informative): The EN title in the official languages .20
History .21
ETSI
5 Final draft ETSI EN 301 489-24 V1.3.1 (2005-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the ETSI
standards One-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of
the Member States relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC [3] as amended) and
Directive 1999/5/EC [2] of the European Parliament and of the Council of 9 March 1999 on radio equipment and
telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive" [2]).
The present document is part 24 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
ETSI
6 Final draft ETSI EN 301 489-24 V1.3.1 (2005-06)
1 Scope
rd
The present document, together with EN 301 489-1 [1], covers the assessment of "3 generation" digital cellular
(IMT-2000 CDMA Direct Spread) (UTRA) mobile and portable (UE) radio terminal equipment and associated ancillary
equipment in respect of ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of radio equipment are not
included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria of
rd
"3 generation" digital cellular (IMT-2000 CDMA Direct Spread) (UTRA) mobile and portable (UE) radio terminal
equipment and associated ancillary equipment.
Examples of digital cellular mobile and portable radio equipment covered by the present document are given in
annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and EN 301 489-1 [1], the provisions of the present document take precedence.
Base station (BS) equipment operating within network infrastructure is outside the scope of the present document.
However, the present document does cover mobile and portable equipment that is intended to be operated in a fixed
location while connected to the AC mains (see clause 5.5).
The environment classification and the emission and immunity requirements used in the present document are as stated
in EN 301 489-1 [1], except for any special conditions included in the present document.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] ETSI EN 301 489-1: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements".
[2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[3] Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member
States relating to electromagnetic compatibility (EMC Directive).
[4] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[5] ETSI TR 125 990: "Universal Mobile Telecommunications System (UMTS); Vocabulary
(3G TR 25.990 Release 1999)".
[6] ETSI TR 121 905: "Universal Mobile Telecommunications System (UMTS); Vocabulary for
3GPP Specifications (3GPP TR 21.905 Release 1999)".
ETSI
7 Final draft ETSI EN 301 489-24 V1.3.1 (2005-06)
[7] ETSI TS 134 108: "Universal Mobile Telecommunications System (UMTS) Common Test
Environments for User Equipment (UE) Conformance Testing (3GPP TS 34.108 Release 1999)".
[8] ETSI TS 125 101: "Universal Mobile Telecommunications System (UMTS); UE Radio
Transmission and Reception (FDD) (3GPP TS 25.101 Release 1999)".
[9] ETSI TS 134 109: "Universal Mobile Telecommunications System (UMTS); Terminal logical test
interface; Special conformance testing functions (3GPP TS 34.109.0 Release 1999)".
[10] ETSI ETR 027: "Radio Equipment and Systems (RES); Methods of measurement for private
mobile radio equipment".
[11] ITU-T Recommendation P.64: "Determination of sensitivity/frequency characteristics of local
telephone systems".
[12] ITU-T Recommendation P.76: "Determination of loudness ratings; fundamental principles".
[13] ETSI TS 125 102: "Universal Mobile Telecommunications System (UMTS); UTRA (UE) TDD;
Radio Transmission and Reception (3GPP TS 25.102 Release 1999)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1] and the following apply:
camped on a cell: UE is in idle mode and has completed the cell selection/reselection process and has chosen a cell.
The UE monitors system information and (in most cases) paging information.
NOTE: The services may be limited, and the PLMN may not be aware of the existence of the UE within the
chosen cell.
data application ancillary: ancillary which provides send and/or receive data access to UMTS services via UE
End-User data: manufacturer defined data patterns for data transfer testing
NOTE: Represents EUT's typical user application data pattern (e.g. photo, video, text file, message) in its
characteristics.
idle mode: state of User Equipment (UE) when switched on but with no Radio Resource Control (RRC) connection
International Mobile Telecommunications-2000 (IMT-2000): third generation mobile systems which provide access,
by means of one or more radio links, to a wide range of telecommunications services supported by the fixed
telecommunication networks (e.g. PSTN, ISDN or IP), and to other services which are specific to mobile users
maximum average power: average transmitter output power obtained over any specified time interval, including
periods with no transmission, when the transmit time slots are at the maximum power setting
traffic mode: state of User Equipment (UE) when switched on and with Radio Resource Control (RRC) connection
established
Universal Terrestrial Radio Access (UTRA): radio access network of the telecommunications system, incorporating
mobile cellular and other functionality, that is the subject of specifications produced by 3GPP
User Equipment (UE): "Mobile Station" (MS) which is an entity capable of accessing a set of UTRA services via one
or more radio interfaces
NOTE: This entity may be stationary or in motion within the UTRA service area while accessing the UTRA
services, and may simultaneously serve one or more users.
ETSI
8 Final draft ETSI EN 301 489-24 V1.3.1 (2005-06)
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
BER Bit Error Ratio
BLER BLock Error Ratio
BS Base Station
CRC Cyclic Redundancy Check
DL Down Link (From BS to UE)
DRX Discontinous Reception
DTX Discontinuous Transmission (see note)
EMC ElectroMagnetic Compatibilty
FDD Frequency Division Duplex
IMT-2000 International Mobile Telecommunications 2000
ITU-R International Telecommunications Union - Radio
LR Location Registration
MRP Mouth Reference Point (artificial head)
MS Mobile Station
RRC Radio Resource Control
SPL Sound Pressure Level
TDD Time Division Duplex
UARFCN UTRA Absolute Radio Frequency Channel Number (see note)
UE User Equipment
UL Up Link (From UE to BS)
UTRA Universal Terrestrial Radio Access
NOTE: Refer to Terminology specifications TR 121 905 [6] and TR 125 990 [5] for further details.
4 Test conditions
For the purpose of the present document, the test conditions of EN 301 489-1 [1], clause 4, shall apply as appropriate.
Further product related test conditions for digital cellular mobile and portable radio equipment are specified in the
present document.
4.1 General
Whenever the Equipment Under Test (EUT) is provided with a detachable antenna, the EUT shall be tested with the
antenna fitted in a manner typical of normal intended use, unless specified otherwise.
4.2 Arrangements for test signals
The provisions of EN 301 489-1 [1], clause 4.2 shall apply with the following modifications.
The wanted RF signal nominal frequency shall be selected by setting the UTRA Absolute Radio Frequency Channel
Number (UARFCN) to an appropriate number.
A communication link shall be set up with a suitable base station simulator (hereafter called "the test system"). The test
system shall be located outside of the test environment.
Where possible the test of the transmitter section and receiver section of the EUT may be carried out simultaneously to
reduce test time;
Immunity tests shall be performed in two modes of operation:
- with a communication link established (traffic mode); and
- in the idle mode.
When the EUT is required to be in the traffic mode, a call is set up according to the Generic call set-up procedure and
...