SIST EN 50290-2-33:2016

SLOVENSKI STANDARD
SIST EN 50290-2-33:2016
01-julij-2016
.RPXQLNDFLMVNLNDEOLGHO6NXSQDSUDYLODQDþUWRYDQMDLQNRQVWUXNFLMD
3ROLHWLOHQVNDL]RODFLMD]DYHþHOHPHQWQHNRYLQVNHSRGDWNRYQHNDEOH]DQRWUDQMR
XSRUDER
Communication cables - Part 2-33: Common design rules and construction -
Polyethylene insulation for multi element metallic data cables for indoor application
Kommunikationskabel - Teil 2-33: Gemeinsame Regeln für Entwicklung und Konstruktion
- Polyethylen-Isoliermischungen für mehradrige metallische Datenkabel zur Anwendung
im Innenbereich
Câbles de communication - Partie 2-33: Règles de conception communes et construction
- Pe pour enveloppes isolantes pour des câbles métalliques multi éléments pour
utilisation intérieure
Ta slovenski standard je istoveten z: EN 50290-2-33:2016
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 50290-2-33:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50290-2-33:2016

---------------------- Page: 2 ----------------------

SIST EN 50290-2-33:2016

EUROPEAN STANDARD EN 50290-2-33

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2016
ICS 33.120.10
English Version
Communication cables - Part 2-33: Common design rules and
construction - Polyethylene insulation compounds for multi
element metallic cables for indoor installation (data cable)
Câbles de communication - Partie 2-33: Règles de Kommunikationskabel - Teil 2-33: Gemeinsame Regeln für
conception communes et construction - Pe pour enveloppes Entwicklung und Konstruktion - Polyethylen-
isolantes pour des câbles métalliques multi éléments pour Isoliermischungen für mehradrige metallische Kabel zur
utilisation intérieure Anwendung im Innenbereich (Datenkabel)
This European Standard was approved by CENELEC on 2016-03-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50290-2-33:2016 E

---------------------- Page: 3 ----------------------

SIST EN 50290-2-33:2016
EN 50290-2-33:2016 (E)

Contents
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Raw material requirements . 5
4 Cable test requirements . 5
5 Health, Safety and Environmental Regulations . 5
Bibliography . 8

2

---------------------- Page: 4 ----------------------

SIST EN 50290-2-33:2016
EN 50290-2-33:2016 (E)

European foreword
This document (EN 50290-2-33:2016) has been prepared by CLC/TC 46X “Communication cables”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2017-03-14
implemented at national level by publication
of an identical national standard or by
endorsement
(dow) 2019-03-14
• latest date by which the national standards
conflicting with this document have to
be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and the
European Free Trade Association.
3

---------------------- Page: 5 ----------------------

SIST EN 50290-2-33:2016
EN 50290-2-33:2016 (E)

1 Scope
This Part 2-33 of EN 50290 gives specific requirements for Polyethylene (PE) compounds to be used for multi
element metallic data cables for indoor application. The standard includes Low Density (LD), Medium Density
(MD) and High Density (HD) Polyethylene compounds.
It is to be read in conjunction with EN 50290-2-20, the product standard EN 50288 and other applicable product
standards.
Using compound and type test data as outlined in this standard, the compound supplier will have sufficient data
to demonstrate compliance and warrant that the material is suitable for the specified application.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable
for its application. For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
EN 50289-3-17, Communication cables - Specifications for test methods - Part 3-17: Mechanical test methods -
Adhesion of dielectric and sheath
EN 50290-2-20, Communication cables - Part 2-20: Common design rules and construction - General
EN 60216 (all parts), Electrical insulating materials – Thermal endurance properties (IEC 60216)
EN 60754-2, Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity
(by pH measurement) and conductivity (IEC 60754-2)
EN 60811-401, El
...