SIST EN 13481-2:2004/A1:2007

SLOVENSKI STANDARD
SIST EN 13481-2:2004/A1:2007
01-januar-2007
Železniške naprave – Zgornji ustroj – Zahteve za izdelavo pritrdilnih sistemov – 2.
del: Pritrdilni sistemi za betonske prage
Railway applications - Track - Performance requirements for fastening systems - Part 2:
Fastening systems for concrete sleepers
Bahnanwendungen - Oberbau - Leistungsanforderungen für
Schienenbefestigungssysteme - Teil 2: Befestigungssysteme für Betonschwellen
Applications ferroviaires - Voie - Prescriptions de performance pour les systemes de
fixation - Partie 2: Systemes de fixation des traverses en béton
Ta slovenski standard je istoveten z: EN 13481-2:2002/A1:2006
ICS:
93.100 Gradnja železnic Construction of railways
SIST EN 13481-2:2004/A1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 13481-2:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2006
ICS 93.100

English Version
Railway applications - Track - Performance requirements for
fastening systems - Part 2: Fastening systems for concrete
sleepers
Applications ferroviaires - Voie - Prescriptions de Bahnanwendungen - Oberbau - Leistungsanforderungen für
performance pour les systèmes de fixation - Partie 2: Schienenbefestigungssysteme - Teil 2:
Systèmes de fixation des traverses en béton Befestigungssysteme für Betonschwellen
This amendment A1 modifies the European Standard EN 13481-2:2002; it was approved by CEN on 26 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13481-2:2002/A1:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 13481-2:2002/A1:2006 (E)
Contents Page
Foreword.3
1 Scope.4
2 Normative references.4
5.1 Longitudinal rail restraint.4
5.2 Torsional resistance.4
5.3 Attenuation of impact loads .4
5.4 Effect of repeated loading.4
5.5 Electrical resistance of fastening system and sleeper.5
5.7 Dimensions.
...