Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter (IEC 60793-1-45:2017)

This part of IEC 60793 establishes uniform requirements for measuring the mode field
diameter (MFD) of single-mode optical fibre, thereby assisting in the inspection of fibres and
cables for commercial purposes

Lichtwellenleiter - Teil 1-45: Messmethoden und Prüfverfahren - Modenfelddurchmesser

Fibre optiques - Partie 1-45: Méthodes de mesure et procédures d'essai - Diamètre du champ de mode

NEW!IEC 60793-1-45:2017 est disponible sous forme de IEC 60793-1-45:2017 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L'IEC 60793-1-45:2017 établit des exigences uniformes pour mesurer le diamètre du champ de mode (DCM) d'une fibre optique unimodale, contribuant ainsi au contrôle des fibres et câbles à des fins commerciales. Cette deuxième édition annule et remplace la première édition parue en 2001. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- amélioration de la description des détails relatifs à la mesure de la fibre de catégorie B6;
- correction des Équations (1), (2), (5) et (6);
- correction du Tableau E.1, Tableau E.2 et Tableau E.3.
Mots-clés: diamètre du champ de mode (DCM)

Optična vlakna - 1-45. del: Metode merjenja in preskusni postopki - Premer polja načina (IEC 60793-1-45:2017)

Ta del standarda IEC 60793 določa enotne zahteve za merjenje premera polja načina (MFD) enorodnih optičnih vlaken, pri čemer pomaga pri pregledu vlaken in kablov za komercialne namene.

General Information

Status
Published
Publication Date
26-Feb-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Feb-2018
Due Date
21-Apr-2018
Completion Date
27-Feb-2018

Relations

Buy Standard

Standard
EN IEC 60793-1-45:2018
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60793-1-45:2018
01-april-2018
1DGRPHãþD
SIST EN 60793-1-45:2004
2SWLþQDYODNQDGHO0HWRGHPHUMHQMDLQSUHVNXVQLSRVWRSNL3UHPHUSROMD
QDþLQD ,(&
Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field
diameter (IEC 60793-1-45:2017)
Ta slovenski standard je istoveten z: EN IEC 60793-1-45:2018
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
SIST EN IEC 60793-1-45:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 60793-1-45:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 60793-1-45:2018


EUROPEAN STANDARD EN IEC 60793-1-45

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2018
ICS 33.180.10 Supersedes EN 60793-1-45:2003
English Version
Optical fibres - Part 1-45: Measurement methods and test
procedures - Mode field diameter
(IEC 60793-1-45:2017)
Fibre optiques - Partie 1-45: Méthodes de mesure et Lichtwellenleiter - Teil 1-45: Messmethoden - Messung des
procédures d'essai - Diamètre du champ de mode Modenfelddurchmessers
(IEC 60793-1-45:2017) (IEC 60793-1-45:2017)
This European Standard was approved by CENELEC on 2017-12-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60793-1-45:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 60793-1-45:2018
EN IEC 60793-1-45:2018 (E)


European foreword
The text of document 86A/1758/CDV, future edition 2 of IEC 60793-1-45, prepared by IEC/SC 86A:
"Fibres and cables", of IEC/TC 86: "Fibre optics" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 60793-1-45:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-09-14
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-12-14
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60793-1-45:2003.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60793-1-45:2017 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN IEC 60793-1-45:2018
EN IEC 60793-1-45:2018 (E)

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.

NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60793-1-40 2001 Optical fibres -- Part 1-40: Measurement EN 60793-1-40 2003
(mod) methods and test procedures - Attenuation
IEC 60793-2 -  Optical fibres -- Part 2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.