SIST EN 301 002-5 V1.1.4:2005
(Main)Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
- Abstract
Test specification for RE/SPS-05141-1.
- Status
- Published
- Publication Date
- 30-Jun-2005
- Technical Committee
- SPN - Services and Protocols for Networks
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jul-2005
- Due Date
- 01-Jul-2005
- Completion Date
- 01-Jul-2005
SIST EN 301 002-5 V1.1.4:2005 is the Slovenian adoption of ETSI EN 301 002-5 for Integrated Services Digital Network (ISDN) Security tools (SET) procedures over the Digital Subscriber Signalling System No. one (DSS1) protocol. It specifies the Test Suite Structure and Test Purposes (TSS&TP) for network-side implementations at the T reference point or the coincident S and T reference point, so it tells testers what to check for conformance to EN 301 002-1.
What does SIST EN 301 002-5 V1.1.4:2005 specify?
SIST EN 301 002-5 V1.1.4:2005 specifies the network-side TSS&TP for SET procedures in an ISDN DSS1 environment. It is the conformance test planning document for implementations that follow EN 301 002-1, and the foreword also points to companion parts for the user side and for the ATS and partial PIXIT proforma.
The document is organized into these main clauses:
- Clause 1 Scope
- Clause 2 References
- Clause 3 Definitions and abbreviations
- Clause 4 Test Suite Structure (TSS)
- Clause 5 Test Purposes (TP)
- Clause 6 Compliance
- Clause 7 Requirements for a comprehensive testing service
Clause 4 groups the network tests by function, and clause 5 turns those groups into named test purposes that can be selected for an implementation under test.
What are the key requirements of SIST EN 301 002-5 V1.1.4:2005?
TSS and TP structure
SIST EN 301 002-5 V1.1.4:2005 defines one TSS for network SET testing and requires each test requirement to be written as a TP. The TP format includes an identifier, the reference conformance requirement, stimulus, reaction, message structure, and selection criteria when a TP is optional.
In practice, this makes the document usable as a test design aid: a lab can turn each TP into a test case and keep the naming aligned with the standard.
Test strategy and message handling
SIST EN 301 002-5 V1.1.4:2005 says the TPs are derived from EN 301 002-1 and EN 301 002-2 because the base standard has no explicit test requirements. The test purposes focus on externally observable behaviour and on situations a real implementation is likely to face.
Unless stated otherwise, the messages are valid and contain at least the mandatory information elements and parameters. For FACILITY messages, the document specifies the point-to-point connectionless bearer independent transport mechanism, with the broadcast mechanism identified where applicable. This matters because a test system must send the right kind of DSS1 signalling, not just the right information.
Network test groups
Clause 4 and clause 5 organize the network TPs into four groups:
- N01 Registration - PIN
- N02 Invocation and Operation
- N03 Notification of possible fraudulent use - PIN
- N04 Notification of possible fraudulent use - TAN
These groups cover registration of a PIN, exceptional cases during service use, and notifications when repeated invalid attempts may indicate fraud.
Selected TP areas
Clause 5.2.1.1 covers PIN registration and error cases such as invalid served user number, missing PIN service, blocked use, wrong old PIN, invalid new PIN format, primitive PIN, and reusing the current PIN. Clause 5.2.1.2 covers exceptional PIN and TAN use during telecommunication services, including expired, mismatched, or blocked credentials.
Clause 5.2.1.3 covers notifications of possible fraudulent use for PIN and TAN. The TP set distinguishes cases where the served user’s multiple subscriber number is provided and cases where it is not, and it also covers the network option for automatic reinitialization after a predefined time period. That matters for implementations that must react correctly to fraud-related events without changing call state unexpectedly.
Compliance and testing service
Clause 6 requires a compliant ATS to use a matching TSS, keep the same naming conventions, preserve the link between TPs and PICS items, and comply with ISO/IEC 9646-2. Clause 7 says a comprehensive testing service for network equipment claiming conformance to EN 301 002-1 shall use the Remote test method as a minimum.
What terms does SIST EN 301 002-5 V1.1.4:2005 define?
- Abstract Test Suite (ATS) - The set of abstract test cases derived for conformance testing.
- Implementation Under Test (IUT) - The device or software being checked against the standard.
- Protocol Implementation Conformance Statement (PICS) - The declaration of which options and capabilities an implementation supports.
- Protocol Implementation eXtra Information for Testing (PIXIT) - Extra implementation data needed to run tests.
- Test Purpose (TP) - A statement of what a test is intended to verify.
- Transaction Number (TAN) - The security identifier used in some SET procedures.
- Personal Identification Number (PIN) - The security code used in SET procedures.
Who uses SIST EN 301 002-5 V1.1.4:2005?
SIST EN 301 002-5 V1.1.4:2005 is used by test labs, protocol engineers, equipment vendors, and quality teams working on ISDN network-side SET conformance. It helps them define ATS, select test cases from PICS options, and check PIN and TAN handling in DSS1 signalling. Buyers or service teams involved in acceptance testing can also use it to understand what a conformance test package should cover.
What changed in SIST EN 301 002-5 V1.1.4:2005 from the previous edition?
The history shows V1.1.3 in July 1999 and V1.1.4 in February 2000, published in May 2000.
Which standards are used with SIST EN 301 002-5 V1.1.4:2005?
- EN 301 002-1 and EN 301 002-2 - the base protocol specification and the PICS proforma for SET.
- ISO/IEC 9646-1 and ISO/IEC 9646-2 - the conformance testing framework and ATS specification used for the test methodology.
- EN 300 196-1 and EN 300 403-1 - protocol references used for components, dummy call reference handling, and DSS1 signalling transport details.
- ITU-T Recommendation I.411, I.112, I.210, and E.164 - reference configurations, ISDN vocabulary, service concepts, and numbering rules.
- ETS 300 406 - the testing methodology reference used for realistic, externally observable test purposes.
- ETR 232 and EN 301 132 - the security terminology and SET reference used for PIN, TAN, and security tool concepts.
What does the SIST EN 301 002-5 V1.1.4:2005 document contain?
Clause 4 contains the test suite structure, shown as a figure with four network test groups. Clause 5 contains the TP naming convention table and the TP structure table, followed by the actual network TPs for PIN registration, invocation and operation, and fraudulent-use notification. The document also includes clauses on compliance and on the minimum testing method for a comprehensive service.
For testing work, the most useful parts are the TP templates and the detailed stimulus-reaction descriptions, because they show what message, component, or error response the IUT should produce in each case.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 301 002-5 V1.1.4:2005 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network". This standard covers: Test specification for RE/SPS-05141-1.
Test specification for RE/SPS-05141-1.
SIST EN 301 002-5 V1.1.4:2005 is classified under the following ICS (International Classification for Standards) categories: 33.080 - Integrated Services Digital Network (ISDN). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 301 002-5 V1.1.4:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2005
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL ,6'1 3RVWRSNLYDURYDOQHJDRURGMD
6(7 3URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMHãW '66 GHO =JUDGED
SUHVNXãDOQHJDQL]DLQQDPHQLSUHVNXãDQMD 766 73 6SHFLILNDFLMD]DRPUHåMH
Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital
Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and
Test Purposes (TSS&TP) specification for the network
Ta slovenski standard je istoveten z: EN 301 002-5 Version 1.1.4
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
European Standard (Telecommunications series)
Integrated Services Digital Network (ISDN);
Security tools (SET) procedures;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 5: Test Suite Structure and Test Purposes (TSS&TP)
specification for the network
2 ETSI EN 301 002-5 V1.1.4 (2000-05)
Reference
DEN/SPS-05141-5
Keywords
DSS1, ISDN, network, security, supplementary
service, TSS&TP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:+33492944200 Fax:+33493654716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network
drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI
3 ETSI EN 301 002-5 V1.1.4 (2000-05)
Contents
Intellectual Property Rights.4
Foreword .4
1 Scope.5
2 References.5
3 Definitions and abbreviations .6
3.1 Definitions.6
3.1.1 Definitions related to conformance testing .6
3.1.2 Definitions related to EN 301 002-1.6
3.2 Abbreviations .7
4 Test Suite Structure (TSS) .7
5 Test Purposes (TP).7
5.1 Introduction .7
5.1.1 TP naming convention .7
5.1.2 Source of TP definition.8
5.1.3 TP structure.8
5.1.4 Test strategy.8
5.2 Network TPs for SET.9
5.2.1 Signalling procedures at the coincident S and T reference point and for interworking with private
ISDN.9
5.2.1.1 Registration - PIN .9
5.2.1.2 Invocation and Operation.10
5.2.1.3 Notification of possible fraudulent use.11
5.2.1.3.1 PIN .11
5.2.1.3.2 TAN.11
6 Compliance .12
7 Requirements for a comprehensive testing service.12
Bibliography.13
History.14
ETSI
4 ETSI EN 301 002-5 V1.1.4 (2000-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server
(http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and
Protocols for Advanced Networks (SPAN).
The present document is part 5 of a multi-part EN covering the Integrated Services Digital Network (ISDN); Security
tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol, as identified below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the user";
Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network";
Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the network".
National transposition dates
Date of adoption of this EN: 28 April 2000
Date of latest announcement of this EN (doa): 31 July 2000
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2001
Date of withdrawal of any conflicting National Standard (dow): 31 January 2001
ETSI
5 ETSI EN 301 002-5 V1.1.4 (2000-05)
1 Scope
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for the network side of the T
reference point or coincident S and T reference point (as defined in ITU-T Recommendation I.411 [6]) of
implementations conforming to the stage three standard for the Security tools (SET) procedures for the pan-European
Integrated Services Digital Network (ISDN) by means of the Digital Subscriber Signalling System No. one (DSS1)
protocol, EN 301 002-1 [1].
A further part of the present document specifies the Abstract Test Suite (ATS) and partial PIXIT proforma based on the
present document. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for the User side of the T
reference point or coincident S and T reference point of implementations conforming to EN 301 002-1 [1].
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETSI EN 301 002-1: "Integrated Services Digital Network (ISDN); Security tools (SET)
procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol
specification".
[2] ETSI EN 301 002-2: "Integrated Services Digital Network (ISDN); Security tools (SET)
procedures; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol
Implementation Conformance Statement (PICS) proforma specification".
[3] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[4] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 2: Abstract Test Suite specification".
[5] ETSI EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for
the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[6] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces - Reference configurations".
[7] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[8] ITU-T Recommendation I.112 (1993): "Vocabulary of terms for ISDNs".
[9] ITU-T Recommendation E.164 (1997): "The international public telecommunication numbering
plan".
[10] ITU-T Recommendation I.210 (1993): "Principles of telecommunication services supported by an
ISDN and the means to describe them".
[11] ETSI ETS 300 406 (1995): "Methods for Testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
ETSI
6 ETSI EN 301 002-5 V1.1.4 (2000-05)
[12] ETSI ETR 232: "Security Techniques Advisory Group (STAG); Glossary of security terminology".
[13] ETSI EN 301 132: "Integrated Services Digital Network (ISDN); Security tools (SET) for use
within telecommunication services".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply.
3.1.1 Definitions related to conformance testing
Abstract Test Suite (ATS): refer to ISO/IEC 9646-1 [3].
Implementation Under Test (IUT): refer to ISO/IEC 9646-1 [3].
Protocol Implementation Conformance Statement (PICS): refer to ISO/IEC 9646-1 [3].
PICS proforma: refer to ISO/IEC 9646-1 [3].
Protocol Implementation eXtra Information for Testing (PIXIT): refer to ISO/IEC 9646-1 [3].
PIXIT proforma: refer to ISO/IEC 9646-1 [3].
system under test: refer to ISO/IEC 9646-1 [3].
Test Purpose (TP): refer to ISO/IEC 9646-1 [3].
3.1.2 Definitions related to EN 301 002-1
component: see EN 300 196-1 [5], subclause 11.2.2.1.
Dummy call reference: see EN 300 403-1 [7], subclause 4.3.
Integrated Services Digital Network (ISDN): see ITU-T Recommendation I.112 [8], definition 308.
invoke component: see EN 300 196-1 [5], subclause 11.2.2.1.
ISDN number: number conforming to the numbering and structure specified in ITU-T Recommendation E.164 [9].
Personal Identification Number (PIN): see ETR 232 [12].
return error component: see EN 300 196-1 [5], subclause 11.2.2.1.
return result component: see EN 300 196-1 [5], subclause 11.2.2.1.
S/T: DSS1 protocol entity at the User side of the user-network interface where a coincident S and T reference point
applies.
security tool: see EN 301 132 [13], clause 3.
served user: user to whom a security tool is provided in combination with a telecommunication service.
service; telecommunication service: see ITU-T Recommendation I.112 [8], definition 201.
supplementary service: see ITU-T Recommendation I.210 [10], subclause 2.4.
T: DSS1 protocol entity at the User side of the user-network interface where a T reference point applies (User is a
Private ISDN).
Transaction Number (TAN): see EN 301 132 [13], clause 3.
ETSI
7 ETSI EN 301 002-5 V1.1.4 (2000-05)
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ATS Abstract Test Suite
ISDN Integrated Services Digital Network
IUT Implementation Under Test
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
SET Security tools
TAN Transaction Number
TP Test Purpose
TSS Test Suite Structure
4 Test Suite Structure (TSS)
Signalling procedures at the coincident S and T reference point and for interworking Group
with private ISDN
Registration - PIN N01
Invocation and operation (exceptional procedures) N02
Notification of possible fraudulent use
PIN N03
TAN N04
Figure 1: Test suite structure
5 Test Purposes (TP)
5.1 Introduction
For each test requirement a TP is defined.
5.1.1 TP naming convention
TPs are numbered, starting at 001, within each group. Groups are organized according to the TSS. Additional references
are added to identify the actual test suite and whether it applies to the network or the user (see table 1).
ETSI
8 ETSI EN 301 002-5 V1.1.4 (2000-05)
Table 1: TP identifier naming convention scheme
Identifier: __
= supplementary service: "SET"
= type of IUT: U User
NNetwork
= group 2 digit field representing group reference according to TSS
= sequential number (001-999)
5.1.2 Source of TP definition
The TPs are based on EN 301 002-1 [1].
5.1
...