SIST-TS CEN/TS 17331:2019
(Main)Construction products - Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis
Construction products - Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis
This Technical Specification specifies existing methods for the determination of the content of non-volatile organic substances in construction products.
Covered substances are phenols, PAH, PCB, phthalates, PBDE, organotin, dioxin and furans, biocides and plant protection products.
The selection of the extraction, clean-up and analysis method(s) to be applied is based on the product matrix and the required sensitivity.
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Gehalt an organischen Stoffen - Extraktions- und Analyseverfahren
Dieses Dokument legt vorhandene Verfahren zur Bestimmung des Gehalts spezifischer organischer Stoffe in Bauprodukten fest.
Die folgenden Parameter sind abgedeckt: BTEX, Biozide, Dioxine, Furane und dioxinähnliche PCBs, Mineralöl, Nonylphenole, PAK, PCB, PCP, PBDE sowie kurzkettige Chlorparaffine.
ANMERKUNG 1 Sich noch in der Entwicklung befindliche oder ausschließlich auf nationaler Ebene vorhandene Verfahren sind für PFOS, PFOA, HBCD und EOX in Anhang B aufgeführt. Diese Verfahren können in den normativen Text aufgenommen werden, sobald die vollständigen EN Normen verfügbar sind.
ANMERKUNG 2 Verfahren, die für Bauprodukte nicht validiert wurden, da zum Zeitpunkt der Robustheitsvalidierung kein geeignetes Material verfügbar war, sind ausschließlich in Anhang B aufgeführt. Dies betrifft Organozinn-verbindungen, Phenole und Phthalate.
Die in diesem Dokument aufgeführten Verfahren stammen aus unterschiedlichen Bereichen und gelten als geeignet für organische Stoffe in organischen Extrakten aus allen Arten von Bauprodukten.
Die Verfahren in diesem Dokument sind für die in Anhang A aufgeführten Produkttypen validiert.
ANMERKUNG 3 Zu Bauprodukten zählen unter anderem mineralische Produkte, bituminöse Produkte, Holzprodukte, Polymerprodukte und Metalle. Diese Technische Spezifikation enthält analytische Verfahren für alle Matrices mit Ausnahme von Metallen.
Produits de construction - Evaluation de l'émission de substances dangereuses - Teneur en substances organiques - Méthodes d'extraction et d'analyse
Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Vsebnost organskih snovi - Metode ekstrakcije in analize
Ta tehnična specifikacija določa obstoječe metode za določanje vsebnosti nehlapnih organskih snovi v gradbenih proizvodih. Zajema naslednje substance: fenoli, PAH, PCB, ftalati, PBDE, organokositrove spojine, dioksini in furani, biocidi in izdelki za zaščito rastlin. Izbira metod za ekstrakcijo, čiščenje in analizo temelji na matrici izdelka in zahtevani občutljivosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 17331:2019
01-julij-2019
Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Vsebnost organskih
snovi - Metode ekstrakcije in analize
Construction products - Assessment of release of dangerous substances - Content of
organic substances - Methods for extraction and analysis
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Gehalt an
organischen Stoffen - Extraktions- und Analyseverfahren
Produits de construction - Evaluation de l'émission de substances dangereuses - Teneur
en substances organiques - Méthodes d'extraction et d'analyse
Ta slovenski standard je istoveten z: CEN/TS 17331:2019
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
91.100.01 Gradbeni materiali na Construction materials in
splošno general
SIST-TS CEN/TS 17331:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17331:2019
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17331:2019
CEN/TS 17331
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
May 2019
TECHNISCHE SPEZIFIKATION
ICS 91.100.01
English Version
Construction products: Assessment of release of
dangerous substances - Content of organic substances -
Methods for extraction and analysis
Produits de construction: Evaluation de l'émission de Bauprodukte: Bewertung der Freisetzung von
substances dangereuses - Teneur en substances gefährlichen Stoffen - Gehalt an organischen Stoffen -
organiques - Méthodes d'extraction et d'analyse Extraktions- und Analyseverfahren
This Technical Specification (CEN/TS) was approved by CEN on 11 February 2019 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17331:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17331:2019
CEN/TS 17331:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Abbreviations . 7
5 Sample preparation . 8
6 Blank determination . 9
7 Interferences . 9
8 Selection of the suitable test method . 9
9 Expression of resul
...
SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17331:2018
01-december-2018
*UDGEHQLSURL]YRGL2FHQMHYDQMHVSURãþDQMDQHYDUQLKVQRYL9VHEQRVWRUJDQVNLK
VQRYL0HWRGHHNVWUDNFLMHLQDQDOL]H
Construction products - Assessment of release of dangerous substances - Content of
organic substances - Methods for extraction and analysis
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Gehalt an
organischen Stoffen - Extraktions- und Analyseverfahren
Produits de construction - Evaluation de l'émission de substances dangereuses - Teneur
en substances organiques - Méthodes d'extraction et d'analyse
Ta slovenski standard je istoveten z: FprCEN/TS 17331
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
91.100.01 Gradbeni materiali na Construction materials in
splošno general
kSIST-TS FprCEN/TS 17331:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 17331:2018
---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 17331:2018
FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17331
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
October 2018
ICS 91.100.01
English Version
Construction products: Assessment of release of
dangerous substances - Content of organic substances -
Methods for extraction and analysis
Produits de construction: Evaluation de l'émission de Bauprodukte: Bewertung der Freisetzung von
substances dangereuses - Teneur en substances gefährlichen Stoffen - Gehalt an organischen Stoffen -
organiques - Méthodes d'extraction et d'analyse Extraktions- und Analyseverfahren
This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 351.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17331:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 17331:2018
FprCEN/TS 17331:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Abbreviations . 8
5 Sample preparation . 9
6 Blank determination . 9
7 Interferences . 9
8 Selection of the suitable test method . 9
9 Expression of results . 12
10 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.