Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone

This standard specifies a method for the determination of the polymerization of the internal coating of aluminium tubes with acetone.

Packmittel - Aluminiumtuben - Prüfverfahren zur Bestimmung der Polymerisation der Innenbeschichtung mit Aceton

Diese Norm legt ein Verfahren zur Bestimmung der Polymerisation der Innenbeschichtung von Aluminiumtuben
mit Aceton fest.

Emballage - Tubes souples en aluminium - Méthodes d'essai visant à vérifier la polymérisation du revêtement interne à l'acétone

La présente norme spécifie une méthode visant à déterminer la polymérisation du revêtement interne des
tubes en aluminium à l’acétone.

Embalaža - Prožne aluminijaste tube - Preskusne metode za določevanje polimerizacije notranjih prevlek z acetonom

General Information

Status
Published
Public Enquiry End Date
19-Jun-2008
Publication Date
12-Oct-2009
ICS
55.120 - Cans. Tins. Tubes
 
77.150.10 - Aluminium products
Technical Committee
EPO - Packaging - sales and grouped
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Oct-2009
Due Date
17-Dec-2009
Completion Date
13-Oct-2009
Ref Project
EN 15766:2009 - Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone

Overview

SIST EN 15766:2009 is a European standard developed by CEN that specifies a test method for determining the polymerization of the internal coating of flexible aluminium tubes using acetone. This standard is essential for manufacturers and quality control laboratories involved in packaging solutions that utilize aluminium tubes with internal epoxy-phenolic coatings. It ensures that the polymerization process of the tube's internal coating meets quality requirements, preventing product contamination or coating failure.

Key Topics

  • Scope: The standard defines a procedure to assess the degree of polymerization of internal coatings in aluminium tubes by using acetone as a solvent agent.
  • Principle: Epoxy-phenolic coatings, commonly applied inside aluminium tubes, dissolve in acetone before polymerization. Properly polymerized coatings resist dissolution, allowing quality verification by rubbing the coating with acetone-soaked cotton wool and observing any coloring or surface degradation.
  • Test Materials:
    • Acetone (CAS No. 67-64-1)
    • Cotton wool
  • Testing Procedure:
    1. Cut and flatten the aluminium tube section.
    2. Rub the coated surface 10 ± 1 times with acetone-soaked cotton wool applying ~10 N/cm² pressure.
    3. Evaluate any color transfer to the cotton wool and changes to the coated surface (mattness, stickiness).
  • Result Evaluation: No discoloration on cotton wool and no adverse surface reaction confirms sufficient polymerization. Minor coloration is acceptable if no surface changes occur.
  • Reporting: Complete test reports include standard references, batch information, test conditions, results, and tester details.

Applications

SIST EN 15766:2009 serves a critical role in the packaging industry where flexible aluminium tubes are widely used for products such as:

  • Pharmaceuticals
  • Cosmetics
  • Food products and condiments
  • Industrial adhesives and pastes

By ensuring the internal coating of aluminium tubes is properly polymerized, the standard helps avoid contamination risks or chemical interactions between the tube material and its contents, maintaining product safety and integrity.

Related Standards

  • EN 1230 series for aluminium tube packaging dimensions and mechanical properties
  • ISO 1133 for polymer melt flow testing, relevant in coating polymer characterization
  • CEN/TC 261 standards on packaging materials and testing methods
  • Other regional or international regulations addressing packaging safety and quality control methods

Adherence to SIST EN 15766:2009 supports manufacturers and quality assurance teams in delivering high-quality, safe, and reliable flexible aluminium tubes by verifying the crucial internal coating's polymerization status using a standardized, reproducible test method. This helps maintain consistent product performance and consumer protection across the packaging supply chain.

Frequently Asked Questions

SIST EN 15766:2009 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone". This standard covers: This standard specifies a method for the determination of the polymerization of the internal coating of aluminium tubes with acetone.

This standard specifies a method for the determination of the polymerization of the internal coating of aluminium tubes with acetone.

SIST EN 15766:2009 is classified under the following ICS (International Classification for Standards) categories: 55.120 - Cans. Tins. Tubes; 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.

You can purchase SIST EN 15766:2009 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DQMHPackmittel - Aluminiumtuben - Prüfverfahren zur Bestimmung der Polymerisation der Innenbeschichtung mit AcetonEmballage - Tubes souples en aluminium - Méthodes d'essai visant à vérifier la polymérisation du revêtement interne à l'acétonePackaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone77.150.10Aluminijski izdelkiAluminium products55.120Cans. Tins. TubesICS:Ta slovenski standard je istoveten z:EN 15766:2009SIST EN 15766:2009en,fr,de01-november-2009SIST EN 15766:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15766May 2009ICS 55.120 English VersionPackaging - Flexible aluminium tubes - Test methods todetermine the polymerization of the internal coating with acetoneEmballage - Tubes souples en aluminium - Méthodesd'essai visant à vérifier la polymérisation du revêtementinterne à l'acétonePackmittel - Aluminiumtuben - Prüfverfahren zurBestimmung der Polymerisation der Innenbeschichtung mitAcetonThis European Standard was approved by CEN on 23 April 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15766:2009: ESIST EN 15766:2009
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...