SIST ETS 300 476-3:1999
(Main)Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium Access Control (MAC) layer - Portable radio Termination (PT)
- Abstract
Conformance test specification for voluntary testing to ETS 300 175, Protocol Implementation Conformance Statement (PICS). Based upon CTS-3 project output.
- Status
- Published
- Publication Date
- 30-Apr-1999
- Technical Committee
- RES - Radio equipment and systems
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-May-1999
- Due Date
- 01-May-1999
- Completion Date
- 01-May-1999
- Mandate
- T-292
Buy Documents
SIST ETS 300 476-3:1999 is the Slovenian version of ETS 300 476-3 from ETSI. It provides the Protocol Implementation Conformance Statement (PICS) proforma for the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI) Medium Access Control (MAC) layer at the Portable radio Termination (PT). In practice, it is the questionnaire a supplier completes to declare which MAC PT services, procedures, parameters and messages are supported.
What does SIST ETS 300 476-3:1999 specify?
SIST ETS 300 476-3:1999 specifies the PICS proforma for the DECT CI MAC layer at the Portable radio Termination (PT), in line with ETS 300 175-3 and ISO/IEC 9646-7. The document is organized as clauses on scope, normative references, definitions and abbreviations, and the conformance requirement, followed by normative Annex A with the actual questionnaire.
Annex A is structured so a supplier can record identification data, state overall conformance, and then declare support for services, procedures, protocol parameters, and message formats. This structure matters because conformance is not inferred from the product alone - it is recorded item by item in a standard form.
What are the key requirements of SIST ETS 300 476-3:1999?
SIST ETS 300 476-3:1999 requires the supplier of a protocol implementation claimed to conform to the portable termination requirements of ETS 300 175-3 to complete the PICS proforma in Annex A and identify both the supplier and the implementation. Clause 4 makes the completed PICS the conformance statement for this standard.
How the questionnaire is filled in
Annex A.1 sets the completion rules. It defines the status marks used in the tables, including mandatory, optional, not applicable, prohibited, qualified optional and conditional items, and the support entries such as supported, not supported, or no answer required. In practice, this is what turns the annex into a controlled declaration rather than free text.
What must be declared about conformance and capabilities
Annex A.4 asks for a global statement of conformance, including whether all mandatory capabilities are implemented. Annex A.5 then breaks capability reporting into service groups such as connection oriented control, broadcast control, connectionless control, multiplexing, and management. For a buyer or test lab, this section shows the product’s feature set at a glance.
Which procedures and operational features are covered
Annex A.5 also requires declaration of procedures for connection setup, modification, data transfer, handover, release, broadcast, connectionless operation, CSF multiplexing, and layer management. Annex A.5.3 adds other capabilities such as extended RF carriers and PT operation modes in the Idle_locked state. In practice, this tells a tester which call flows and operating modes the implementation should handle.
Which timing, channel and bearer data must be stated
Annex A.6 covers timers, protocol constants, channel selection parameters, channels, bearer types and slot types. These items matter because they affect call behavior, radio resource handling and implementation limits, so the supplier has to state what the implementation supports and, where applicable, the supported values or ranges.
Which messages and message formats are covered
Annex A.7 requires support to be stated for messages sent and received in both directions. It covers A-field and B-field messages such as identities information, system information, paging tail, MAC control, null, quality control, broadcast and connectionless, encryption control, and GF-channel data packet messages. Annex A.8 then gives the corresponding message formats and field values. That means the document is not only about whether a message exists, but also which fields, bit patterns and message variants the implementation supports.
What terms does SIST ETS 300 476-3:1999 define?
- Implementation Conformance Statement (ICS) - a statement by the supplier describing which capabilities of an implementation or system are implemented.
- Protocol Implementation Conformance Statement (PICS) - an ICS used for protocol conformance, completed from a proforma.
- ICS proforma - a questionnaire that becomes an ICS when completed for a specific implementation.
- Implementation Under Test (IUT) - the implementation being assessed for conformance.
- System Under Test (SUT) - the system in which the IUT resides during testing.
- Digital Enhanced Cordless Telecommunications (DECT) - the cordless telecommunications framework that this standard belongs to.
- Medium Access Control (MAC) - the DECT layer covered by this part of the PICS proforma.
- Portable radio Termination (PT) - the portable side of the DECT Common Interface covered by this part.
Who uses SIST ETS 300 476-3:1999?
SIST ETS 300 476-3:1999 is used by suppliers of DECT portable equipment who need to declare MAC-layer support in a standard form. Test laboratories and conformance teams use it to check that the declared capabilities match the implementation. Engineering, quality and purchasing teams also use the completed PICS to compare products and to understand which PT MAC features are supported.
Which standards are used with SIST ETS 300 476-3:1999?
| Standard(s) | What it contributes |
|---|---|
| ETS 300 175-3 | The DECT CI MAC layer specification that this PICS proforma describes |
| ETS 300 175-1, -2, -4, -5, -6, -7, -8, -9 | The related DECT CI parts for overview, physical layer, DLC, NWK, identities and addressing, security, speech coding and transmission, and the Public Access Profile (PAP) |
| ETS 300 406 | The testing methodology for protocol and profile conformance testing |
| ISO/IEC 9646-1 | The general conformance testing concepts and framework |
| ISO/IEC 9646-7 | The rules for Implementation Conformance Statements and their completion |
What does the SIST ETS 300 476-3:1999 document contain?
SIST ETS 300 476-3:1999 contains a long Annex A made up of structured tables for a completed PICS. Those tables cover implementation identification, protocol identification, overall conformance, supported services and procedures, timers and constants, supported channels and bearer types, and detailed message support.
The annex then goes deeper into message families, with separate tables for sending and receiving directions. It also lists message field formats and allowed values for items such as system information, paging information, MAC control and B-field content. This layout is what makes the document useful for conformance review, test planning and documenting supported DECT MAC PT behavior.
Buy Documents
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST ETS 300 476-3:1999 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium Access Control (MAC) layer - Portable radio Termination (PT)". This standard covers: Conformance test specification for voluntary testing to ETS 300 175, Protocol Implementation Conformance Statement (PICS). Based upon CTS-3 project output.
Conformance test specification for voluntary testing to ETS 300 175, Protocol Implementation Conformance Statement (PICS). Based upon CTS-3 project output.
SIST ETS 300 476-3:1999 is classified under the following ICS (International Classification for Standards) categories: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST ETS 300 476-3:1999 is associated with the following European legislation: Standardization Mandates: T-292. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST ETS 300 476-3:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium Access Control (MAC) layer - Portable radio Termination (PT)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:ETS 300 476-3 E13SIST ETS 300 476-3:1999en01-MDQXDU-19993SIST ETS 300 476-3:1999SLOVENSKI
STANDARD
EUROPEANETS 300 476-3TELECOMMUNICATIONAugust 1996STANDARDSource: ETSI TC-RESReference: DE/RES-03042-3ICS:33.020, 33.060.50Key words:DECT, CI, PICSRadio Equipment and Systems (RES);Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI);Protocol Implementation Conformance Statement (PICS)proforma;Part 3: Medium Access Control (MAC) layer -Portable radio Termination (PT)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1996. All rights reserved.SIST ETS 300 476-3:1999
Page 2ETS 300 476-3: August 1996Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 476-3:1999
Page 3ETS 300 476-3: August 1996ContentsForeword.131Scope.152Normative references.153Definitions and abbreviations.163.1Definitions.163.2Abbreviations.164Conformance requirement to this PICS proforma specification.16Annex A (normative):PICS proforma for DECT MAC PT.17A.1Introduction for completing the PICS proforma.17A.1.1Purposes and structure.17A.1.2Symbols, abbreviations and conventions.17A.1.3Guidances for completing the PICS.18A.2Identification of the implementation.19A.2.1Date of statement.19A.2.2Implementation Under Test (IUT) identification.19A.2.3System Under Test (SUT) identification.19A.2.4Product supplier.19A.2.5Client identification.20A.2.6Contact person.20A.3Identification of the protocol.20A.4Global statement of conformance.20A.5Capabilities.21A.5.1Services.21A.5.1.1Connection oriented control services.21A.5.1.2Broadcast control services.22A.5.1.3Connectionless control services.22A.5.1.3.1Downlink connectionless services.22A.5.1.3.2Uplink connectionless services.23A.5.1.4Multiplexing services.23A.5.1.5Management services.24A.5.2Procedures.24A.5.2.1Connection procedures.25A.5.2.1.1Connection setup procedures.25A.5.2.1.2Connection modification procedures.26A.5.2.1.3Connection data transfer procedures.26A.5.2.1.4Handover procedures.26A.5.2.1.5Connection release procedures.27A.5.2.2Broadcast procedures.27A.5.2.3Connectionless procedures.27A.5.2.3.1Downlink connectionless procedures.27A.5.2.3.2Uplink connectionless procedures.27A.5.2.4CSF multiplexing procedures.28A.5.2.5Layer management procedures.28A.5.3Other capabilities.28A.6Protocol parameters.29SIST ETS 300 476-3:1999
Page 4ETS 300 476-3: August 1996A.6.1Timer support.29A.6.2Protocol constants.29A.6.3Channel selection parameters.29A.6.4Channels supported.30A.6.5Bearer types supported.30A.6.6Slot types supported.30A.7Messages.30A.7.1A - field header.31A.7.1.1A - field header - Tail Identification.31A.7.1.2A - field header - “Q1/BCK” bit.31A.7.1.3A - field header - B-field identification.32A.7.1.4A - field header - “Q2” bit.32A.7.2A - field identities information (NT) message.32A.7.3A - field system information (QT) messages.33A.7.4A - field paging tail (PT) messages.33A.7.4.1Paging tail messages supported.33A.7.4.2PT messages information type.33A.7.5A - field MAC control (MT) messages.34A.7.5.1Mac control messages supported.34A.7.5.2Basic connection control messages.35A.7.5.3MAC layer test messages.35A.7.5.4Advanced connection control messages.36A.7.5.5Quality control messages.37A.7.5.6Broadcast and connectionless (BCL) messages.37A.7.5.7Encryption control (EC) messages.38A.7.6B - Field Messages.39A.7.6.1B - Field Messages supported.39A.7.6.2B - Field Advanced connection control messages.39A.7.6.3B - Field - Null messages.40A.7.6.4B - Field - Quality control messages.41A.7.6.5B - Field - GF-channel data packet messages.42A.8MAC messages format and field value.43A.8.1A - field identities information (NT) message.43A.8.2A - field system information (QT) messages.44A.8.2.1QT - Static system information.44A.8.2.2QT - Extended RF carrier information.44A.8.2.3QT - Fixed part capability.45A.8.2.4QT - Extended fixed part capabilities.45A.8.2.5QT - Secondary access rights identities.45A.8.2.6QT - Multi-frame number.46A.8.2.7QT - escape.46A.8.3A - field paging tail (PT) messages.46A.8.3.1PT message - Full page.46A.8.3.2PT message - Long page.46A.8.3.3PT message - Short page.47A.8.3.4PT message - Zero length page.47A.8.3.5PT messages - MAC info. element.47A.8.3.5.1MAC info. element - Fill bits.47A.8.3.5.2MAC info. element - Blind full slot.47A.8.3.5.3MAC info. element - Other bearer.48A.8.3.5.4MAC info. element - Recommended other bearer.48A.8.3.5.5MAC info. element - Good RFP bearer.48A.8.3.5.6MAC info. element - Dummy or C/L bearer position.48A.8.3.5.7MAC info. element - RFP identity.48A.8.3.5.8MAC info. element - Escape.49A.8.3.5.9MAC info. element - Dummy or C/L bearer marker.49A.8.3.5.10MAC info. element - Bearer handover information.49A.8.3.5.11MAC info. element - RFP status.49A.8.4A - field MAC control (MT) messages.50A.8.4.1Basic connection control messages.50A.8.4.1.1Basic CC - access request.50SIST ETS 300 476-3:1999
Page 5ETS 300 476-3: August 1996A.8.4.1.2Basic CC - bearer handover request.50A.8.4.1.3Basic CC - connection handover request.50A.8.4.1.4Basic CC - unconfirmed access request.50A.8.4.1.5Basic CC - bearer confirm.51A.8.4.1.6Basic CC - wait.51A.8.4.1.7Basic CC - release.51A.8.4.2MAC layer test messages.52A.8.4.2.1MAC test - force transmit.52A.8.4.2.2MAC test - loopback data.53A.8.4.2.3MAC test - defeat antenna diversity.53A.8.4.2.4MAC test - force bearer handover.53A.8.4.2.5MAC test - escape.54A.8.4.2.6MAC test - network test.54A.8.4.2.7MAC test - clear test modes.55A.8.4.3Advanced connection control messages.55A.8.4.3.1Advanced CC - access request.55A.8.4.3.2Advanced CC - bearer handover request.56A.8.4.3.3Advanced CC - connection handover request.56A.8.4.3.4Advanced CC - unconfirmed access request.56A.8.4.3.5Advanced CC - bearer confirm.57A.8.4.3.6Advanced CC - wait.57A.8.4.3.7Advanced CC - Attributes_T request.58A.8.4.3.8Advanced CC - Attributes_T confirm.59A.8.4.3.9Advanced CC - Bandwidth_T request.59A.8.4.3.10Advanced CC - Bandwidth_T confirm.60A.8.4.3.11Advanced CC - Channel List.61A.8.4.3.12Advanced CC - Unconfirmed_dummy.61A.8.4.3.13Advanced CC - Unconfirmed_handover.62A.8.4.3.14Advanced CC - release.62A.8.4.4Quality control messages.63A.8.4.4.1QC - antenna switch single bearer request.63A.8.4.4.2QC - antenna switch all bearers request.63A.8.4.4.3QC - bearer handover request.64A.8.4.4.4QC - connection handover request.64A.8.4.4.5QC - frequency control single bearer request.65A.8.4.4.6QC - frequency control all bearers request.65A.8.4.5Broadcast and connectionless (BCL) messages.66A.8.4.5.1BCL - CLF, first of 2 transmissions, half slot.66A.8.4.5.2BCL - CLF, first of 2 transmissions, full slot.66A.8.4.5.3BCL - CLF, first of 2 transmissions, double slot.66A.8.4.5.4BCL - CLF, last transmissions, half slot.67A.8.4.5.5BCL - CLF, last transmissions, full slot.67A.8.4.5.6BCL - CLF, last transmissions, double slot.67A.8.4.5.7BCL - C/L single transmissions, no CF or CLS.67A.8.4.5.8BCL - CLS service, first transmissions.68A.8.4.5.9BCL - change dummy bearer position.68A.8.4.5.10BCL - extended system info., A-field procedure.68A.8.4.5.11BCL - extended system info., B-field procedure.69A.8.4.6Encryption control (EC) messages.69A.8.4.6.1EC - Encryption start.69A.8.4.6.2EC - Encryption stop.70A.8.4.7MT message - B - field setup.72A.8.4.8MT message - Escape.72A.8.4.9MT message - TARI.72A.8.5B - Field Messages.73A.8.5.1B - Field - Advanced CC messages.73A.8.5.1.1B-field Advanced CC - Access request.73A.8.5.1.2B-field Advanced CC - Bearer handover request.74A.8.5.1.3B-field Advanced CC - Connection handover request.75A.8.5.1.4B-field Advanced CC - Unconfirmed access request.76A.8.5.1.5B-field Advanced CC - Bearer confirm.77A.8.5.1.6B-field Advanced CC - Wait.77A.8.5.1.7B-field Advanced CC - Attributes_B request.78SIST ETS 300 476-3:1999
Page 6ETS 300 476-3: August 1996A.8.5.1.8B-field Advanced CC - Attributes_B confirm.79A.8.5.1.9B-field Advanced CC - Bandwidth_B request.80A.8.5.1.10B-field Advanced CC - Bandwidth_B confirm.81A.8.5.1.11B-field Advanced CC - Channel List.82A.8.5.1.12B-field Advanced CC - Unconfirmed_Dummy.83A.8.5.1.13B-field Advanced CC - Unconfirmed_Handover.84A.8.5.1.14B-field Advanced CC - Release.85A.8.5.2B-field - Null Messages (NM).85A.8.5.2.1B-field - NM No CF or CLF data in the B-field.85A.8.5.2.2B-field - NM One B-subfield contains CF or CLF data.86A.8.5.2.3B-field - NM Two B-subfield contain CF or CLF data.87A.8.5.2.4B-field - NM Three B-subfield contain CF or CLF data.87A.8.5.2.5B-field - NM Four B-subfield contain CF or CLF data.88A.8.5.2.6B-field - NM Five B-subfield contain CF or CLF data.89A.8.5.2.7B-field - NM Six B-subfield contain CF or CLF data.89A.8.5.2.8B-field - NM Seven B-subfield contain CF or CLF data.90A.8.5.2.9B-field - NM Eight B-subfield contain CF or CLF data.91A.8.5.2.10B-field - NM Nine B-subfield contain CF or CLF data.91A.8.5.3B - Field - Quality control (QC) messages.92A.8.5.3.1B - Field - QC Antenna switch single bearer.92A.8.5.3.2B - Field - QC Antenna switch all bearers.93A.8.5.3.3B - Field - QC Bearer handover.93A.8.5.3.4B - Field - QC Connection handover.94A.8.5.3.5B - Field - QC Frequency control single bearer.95A.8.5.3.6B - Field - QC Frequency control all bearers.95A.8.5.3.7B - Field - QC Reset request first TDMA half frame.96A.8.5.3.8B - Field - QC Reset request second TDMA half frame.97A.8.5.3.9B - Field - QC Reset request both TDMA half frames.97A.8.5.3.10B - Field - QC Reset confirm first TDMA half frame.98A.8.5.3.11B - Field - QC Reset confirm second TDMA half frame.99A.8.5.3.12B - Field - QC Reset confirm both TDMA half frames.99A.8.5.3.13B - Field - QC MOD2 ACK.100A.8.5.4B - Field - Extended system information (ES) messages.101A.8.5.4.1B - Field - ES TARI message.101A.8.5.5B - Field - GF-channel data packet messages.101A.8.5.5.1B - Field - GF-No CF data in the B-field.101A.8.5.5.2B - Field - GF-One B-subfield contains CF data.102A.8.5.5.3B - Field - GF-Two B-subfield contain CF data.102A.8.5.5.4B - Field - GF-Three B-subfield contain CF data.103A.8.5.5.5B - Field - GF-Four B-subfield contain CF data.103A.8.5.5.6B - Field - GF-Five B-subfield contain CF data.104A.8.5.5.7B - Field - GF-Six B-subfield contain CF data.104A.8.5.5.8B - Field - GF-Seven B-subfield contain CF data.105A.8.5.5.9B - Field - GF-Eight B-subfield contain CF data.105A.8.5.5.10B - Field - GF-Nine B-subfield contain CF data.106A.8.5.6B - Field - Escape message.106History.107SIST ETS 300 476-3:1999
Page 7ETS 300 476-3: August 1996QuestionsTable A.1: Date of Statement.19Table A.2: IUT identification.19Table A.3: SUT identification.19Table A.4: Product supplier.19Table A.5: Client identification.20Table A.6: Contact person identification.20Table A.7: Identification of protocol.20Table A.8: Global statement of conformance.20Table A.9: Service groups supported.21Table A.10: Connection oriented control services.21Table A.11: Connection services.21Table A.12: Symmetric connection oriented services.21Table A.13: Asymmetric connection oriented services.22Table A.14: C-plane connection services.22Table A.15: Broadcast services.22Table A.16: Connectionless control services.22Table A.17: Downlink connectionless services.22Table A.18: Uplink connectionless services.23Table A.19: CSF multiplexing services.23Table A.20: D-MAP services.23Table A.21: B-MAP services.23Table A.22: E/U mux services.24Table A.23: C mux mapping services.24Table A.24: Management services.24Table A.25: Handover services management.24Table A.26: C/O single bearer setup procedures.25Table A.27: C/O multi-bearer symmetric setup procedures.25Table A.28: C/O multi-bearer asymmetric setup procedures.25Table A.29: C/O bearer setup procedures.26Table A.30: C/O connection modification procedures.26Table A.31: C/O data transfer procedures.26Table A.32: Handover procedures.26Table A.33: C/O connection release procedures.27Table A.34: Broadcast procedures.27Table A.35: Downlink connectionless procedures.27Table A.36: Uplink connectionless procedures.27Table A.37: CSF multiplexing procedures.28Table A.38: Layer management procedures.28Table A.39: Extended RF carriers supported.28Table A.40: Operation modes in Idle_locked state supported.28Table A.41: Timer supported.29Table A.42: Protocol constants support.29Table A.43: Channel selection parameters.30Table A.44: Channels supported.30Table A.45: Bearer types supported.30Table A.46: Slot types supported.30Table A.47: Tail Identification (Sending P to F).31Table A.48: Tail Identification (Receipt F to P).31Table A.49: Q1/BCK bit (Sending P to F).31Table A.50: Q1/BCK bit (Receipt F to P).31Table A.51: B-field identification (Sending P to F).32Table A.52: B-field identification (Receipt F to P).32Table A.53: Q2 bit (Sending P to F).32Table A.54: Q2 bit (Receipt F to P).32Table A.55: Identities information (NT) message (Sending P to F).33Table A.56: Identities information (NT) message (Receipt F to P).33Table A.57: System information (QT) message (Receipt F to P).33Table A.58: Paging tail (PT) messages (Receipt F to P).33SIST ETS 300 476-3:1999
Page 8ETS 300 476-3: August 1996Table A.59: PT messages information supported (Receipt F to P).34Table A.60: MAC control (MT) messages (Sending P to F).34Table A.61: MAC control (MT) messages (Receipt F to P).34Table A.62: Basic connection control (Sending P to F).35Table A.63: Basic connection control (Receipt F to P).35Table A.64: MAC layer test messages (Sending P to F).35Table A.65: MAC layer test messages (Receipt F to P).36Table A.66: Advanced connection control messages (Sending P to F).36Table A.67: Advanced connection control messages (Receipt F to P).37Table A.68: Quality control (QC) messages (Sending P to F).37Table A.69: Quality control (QC) messages (Receipt F to P).37Table A.70: Broadcast and connectionless (BCL) messages (Sending P to F).38Table A.71: Broadcast and connectionless (BCL) messages (Receipt F to P).38Table A.72: Encryption control (EC) messages (Sending P to F).38Table A.73: Encryption control (EC) messages (Receipt F to P).39Table A.74: B - Field messages supported (Sending P to F).39Table A.75: B - Field messages supported (Receipt F to P).39Table A.76: B - Field Advanced connection control messages (Sending P to F).40Table A.77: B - Field Advanced connection control messages (Receipt F to P).40Table A.78: B - Field - Null messages (Sending P to F).41Table A.79: B - Field - Null messages (Receipt F to P).41Table A.80: B - Field - Quality control messages (Sending P to F).42Table A.81: B - Field - Quality control messages (Receipt F to P).42Table A.82: B - Field - GF-channel data packet messages (Sending P to F).43Table A.83: B - Field - GF-channel data packet messages (Receipt F to P).43Table A.84: NT - Identities Information (Sending P to F).43Table A.85: NT - Identities Information (Receipt F to P).44Table A.86: QT - Static system information (Receipt F to P).44Table A.87: QT - Extended RF carrier information (Receipt F to P).44Table A.88: QT - Fixed part capability (Receipt F to P).45Table A.89: QT - Extended fixed part capabilities (Receipt F to P).45Table A.90: QT - Secondary access rights identities (Receipt F to P).45Table A.91: QT - Multi-frame number (Receipt F to P).46Table A.92: QT - escape (Receipt F to P).46Table A.93: PT message - Full page (Receipt F to P).46Table A.94: PT message - Long page (Receipt F to P).46Table A.95: PT message - Short page (Receipt F to P).47Table A.96.: PT message - Zero length page (Receipt F to P).47Table A.97: MAC info. element - Fill bits (Receipt F to P).47Table A.98: MAC info. element - Blind full slot (Receipt F to P).47Table A.99.: MAC info. element - Other bearer (Receipt F to P).48Table A.100: MAC info. element - Recommended other bearer (Receipt F to P).48Table A.101: MAC info. element - Good RFP bearer (Receipt F to P).48Table A.102: MAC info. element - Dummy or C/L bearer position (Receipt F to P).48Table A.103.: MAC info. element - RFP identity (Receipt F to P).48Table A.104: MAC info. element - Escape (Receipt F to P).49Table A.105: MAC info. element - Dummy or C/L bearer marker (Receipt F to P).49Table A.106: MAC info. element - Bearer handover information (Receipt F to P).49Table A.107: MAC info. element - RFP status (Receipt F to P).49Table A.108: Basic CC - access request (Sending P to F).50Table A.109: Basic CC - bearer handover request (Sending P to F).50Table A.110: Basic CC - connection handover request (Sending P to F).50Table A.111: Basic CC - unconfirmed access request (Sending P to F).50Table A.112: Basic CC - bearer confirm (Receipt F to P).51Table A.113: Basic CC - wait (Sending P to F).51Table A.114: Basic CC - wait (Receipt F to P).51Table A.115: Basic CC - release (Sending P to F).51Table A.116: Basic CC - release (Receipt F to P).52Table A.117: MAC test - force transmit (Sending P to F).52Table A.118: MAC test - force transmit (Receipt F to P).52Table A.119: MAC test - loopback data (Sending P to F).53Table A.120: MAC test - loopback data (Receipt F to P).53Table A.121: MAC test - defeat antenna diversity (Sending P to F).53SIST ETS 300 476-3:1999
Page 9ETS 300 476-3: August 1996Table A.122.: MAC test - force bearer handover (Sending P to F).53Table A.123.: MAC test - force bearer handover (Receipt F to P).54Table A.124: MAC test - escape (Sending P to F).54Table A.125: MAC test - escape (Receipt F to P).54Table A.126: MAC test - network test (Sending P to F).54Table A.127: MAC test - network test (Receipt F to P).54Table A.128: MAC test - clear test modes (Sending P to F).55Table A.129: MAC test - clear test modes (Receipt F to P).55Table A.130: Advanced CC - access request (Sending P to F).55Table A.131: Advanced CC - access request (Receipt F to P).55Table A.132: Advanced CC - bearer handover request (Sending P to F).56Table A.133: Advanced CC - connection handover request (Sending P to F).56Table A.134: Advanced CC - connection handover request (Receipt F to P).56Table A.135: Advanced CC - unconfirmed access request (Sending P to F).56Table A.136: Advanced CC - unconfirmed access request (Receipt F to P).57Table A.137: Advanced CC - bearer confirm (Sending P to F).57Table A.138: Advanced CC - bearer confirm (Receipt F to P).57Table A.139: Advanced CC - wait (Sending P to F).57Table A.140: Advanced CC - wait (Receipt F to P).58Table A.141: Advanced CC - Attributes_T request (Sending P to F).58Table A.142: Advanced CC - Attributes_T request (Receipt F to P).58Table A.143: Advanced CC - Attributes_T confirm (Sending P to F).59Table A.144: Advanced CC - Attributes_T confirm (Receipt F to P).59Table A.145: Advanced CC - Bandwidth_T request (Sending P to F).59Table A.146: Advanced CC - Bandwidth_T request (Receipt F to P).60Table A.147: Advanced CC - Bandwidth_T confirm (Sending P to F).60Table A.148: Advanced CC - Bandwidth_T confirm (Receipt F to P).60Table A.149: Advanced CC - Channel List (Sending P to F).61Table A.150: Advanced CC - Channel List (Receipt F to P).61Table A.151: Advanced CC - Unconfirmed_dummy (Sending P to F).61Table A.152: Advanced CC - Unconfirmed_dummy (Receipt F to P).61Table A.153: Advanced CC - Unconfirmed_handover (Sending P to F).62Table A.154: Advanced CC - Unconfirmed_handover (Receipt F to P).62Table A.155: Advanced CC - release (Sending P to F).62Table A.156: Advanced CC - release (Receipt F to P).62Table A.157: QC - antenna switch single bearer request (Sending P to F).63Table A.158: QC - antenna switch single bearer request (Receipt F to P).63Table A.159: QC - antenna switch all bearers request (Sending P to F).63Table A.160: QC - antenna switch all bearers request (Receipt F to P).64Table A.161: QC - bearer handover request (Sending P to F).64Table A.162: QC - bearer handover request (Receipt F to P).64Table A.163: QC - connection handover request (Sending P to F).64Table A.164: QC - connection handover request (Receipt F to P).65Table A.165: QC - frequency control single bearer request (Sending P to F).65Table A.166: QC - frequency control single bearer request (Receipt F to P).65Table A.167: QC - frequency control all bearers request (Sending P to F).65Table A.168: QC - frequency control all bearers request (Receipt F to P).66Table A.169: BCL - CLF, first of 2 transmissions, half slot (Sending P to F).66Table A.170: BCL - CLF first of 2 transmissions, full slot (Sending P to F).66Table A.171: BCL - CLF first of 2 transmissions, double slot (Sending P to F).66Table A.172: BCL - CLF, last transmissions, half slot (Sending P to F).67Table A.173: BCL - CLF, last transmissions, full slot (Sending P to F).67Table A.174: BCL - CLF, last transmissions, double slot (Sending P to F).67Table A.175: BCL - C/L single transmissions, no CF or CLS (Sending P to F).67Table A.176: BCL - CLS service, first transmission (Sending P to F).68Table A.177: BCL - change dummy bearer position (Sending P to F).68Table A.178: BCL - extended system info., A-field procedure (Sending P to F).68Table A.179: BCL - extended system info., A-field procedure (Receipt F to P).68Table A.180: BCL - extended system info., B-field procedure (Sending P to F).
...
SLOVENSKI STANDARD
01-maj-1999
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 6NXSQLYPHVQLN &,
3URIRUPDL]MDYHRVNODGQRVWLL]YHGEHSURWRNROD 3,&6 GHO 3ODVWNUPLOMHQMD
GRVWRSDGRSUHQRVQHJDPHGLMD 0$& SUHQRVQDUDGLMVND]DNOMXþLWHY 37
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium
Access Control (MAC) layer - Portable radio Termination (PT)
Ta slovenski standard je istoveten z: ETS 300 476-3 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN ETS 300 476-3
TELECOMMUNICATION August 1996
STANDARD
Source: ETSI TC-RES Reference: DE/RES-03042-3
ICS: 33.020, 33.060.50
Key words: DECT, CI, PICS
Radio Equipment and Systems (RES);
Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI);
Protocol Implementation Conformance Statement (PICS)
proforma;
Part 3: Medium Access Control (MAC) layer -
Portable radio Termination (PT)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.
Page 2
ETS 300 476-3: August 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
Page 3
ETS 300 476-3: August 1996
Contents
Foreword .13
1 Scope .15
2 Normative references.15
3 Definitions and abbreviations .16
3.1 Definitions .16
3.2 Abbreviations .16
4 Conformance requirement to this PICS proforma specification.16
Annex A (normative): PICS proforma for DECT MAC PT.17
A.1 Introduction for completing the PICS proforma.17
A.1.1 Purposes and structure.17
A.1.2 Symbols, abbreviations and conventions.17
A.1.3 Guidances for completing the PICS.18
A.2 Identification of the implementation.19
A.2.1 Date of statement .19
A.2.2 Implementation Under Test (IUT) identification .19
A.2.3 System Under Test (SUT) identification .19
A.2.4 Product supplier.19
A.2.5 Client identification.20
A.2.6 Contact person.20
A.3 Identification of the protocol .20
A.4 Global statement of conformance .20
A.5 Capabilities.21
A.5.1 Services .21
A.5.1.1 Connection oriented control services .21
A.5.1.2 Broadcast control services .22
A.5.1.3 Connectionless control services.22
A.5.1.3.1 Downlink connectionless services .22
A.5.1.3.2 Uplink connectionless services.23
A.5.1.4 Multiplexing services .23
A.5.1.5 Management services .24
A.5.2 Procedures.24
A.5.2.1 Connection procedures .25
A.5.2.1.1 Connection setup procedures.25
A.5.2.1.2 Connection modification procedures .26
A.5.2.1.3 Connection data transfer procedures .26
A.5.2.1.4 Handover procedures .26
A.5.2.1.5 Connection release procedures.27
A.5.2.2 Broadcast procedures .27
A.5.2.3 Connectionless procedures.27
A.5.2.3.1 Downlink connectionless procedures .27
A.5.2.3.2 Uplink connectionless procedures.27
A.5.2.4 CSF multiplexing procedures .28
A.5.2.5 Layer management procedures .28
A.5.3 Other capabilities .28
A.6 Protocol parameters.29
Page 4
ETS 300 476-3: August 1996
A.6.1 Timer support. 29
A.6.2 Protocol constants. 29
A.6.3 Channel selection parameters . 29
A.6.4 Channels supported . 30
A.6.5 Bearer types supported.30
A.6.6 Slot types supported. 30
A.7 Messages . 30
A.7.1 A - field header. 31
A.7.1.1 A - field header - Tail Identification . 31
A.7.1.2 A - field header - “Q1/BCK” bit. 31
A.7.1.3 A - field header - B-field identification. 32
A.7.1.4 A - field header - “Q2” bit . 32
A.7.2 A - field identities information (N ) message . 32
T
A.7.3 A - field system information (Q ) messages. 33
T
A.7.4 A - field paging tail (P ) messages . 33
T
A.7.4.1 Paging tail messages supported. 33
A.7.4.2 P messages information type . 33
T
A.7.5 A - field MAC control (M ) messages . 34
T
A.7.5.1 Mac control messages supported. 34
A.7.5.2 Basic connection control messages . 35
A.7.5.3 MAC layer test messages. 35
A.7.5.4 Advanced connection control messages . 36
A.7.5.5 Quality control messages . 37
A.7.5.6 Broadcast and connectionless (BCL) messages. 37
A.7.5.7 Encryption control (EC) messages . 38
A.7.6 B - Field Messages. 39
A.7.6.1 B - Field Messages supported. 39
A.7.6.2 B - Field Advanced connection control messages. 39
A.7.6.3 B - Field - Null messages. 40
A.7.6.4 B - Field - Quality control messages. 41
A.7.6.5 B - Field - GF-channel data packet messages . 42
A.8 MAC messages format and field value. 43
A.8.1 A - field identities information (N ) message . 43
T
A.8.2 A - field system information (Q ) messages. 44
T
A.8.2.1 QT - Static system information . 44
A.8.2.2 QT - Extended RF carrier information . 44
A.8.2.3 QT - Fixed part capability. 45
A.8.2.4 QT - Extended fixed part capabilities. 45
A.8.2.5 QT - Secondary access rights identities . 45
A.8.2.6 QT - Multi-frame number . 46
A.8.2.7 QT - escape. 46
A.8.3 A - field paging tail (P ) messages . 46
T
A.8.3.1 P message - Full page . 46
T
A.8.3.2 P message - Long page . 46
T
A.8.3.3 P message - Short page. 47
T
A.8.3.4 P message - Zero length page . 47
T
A.8.3.5 P messages - MAC info. element. 47
T
A.8.3.5.1 MAC info. element - Fill bits . 47
A.8.3.5.2 MAC info. element - Blind full slot . 47
A.8.3.5.3 MAC info. element - Other bearer. 48
A.8.3.5.4 MAC info. element - Recommended other bearer. 48
A.8.3.5.5 MAC info. element - Good RFP bearer. 48
A.8.3.5.6 MAC info. element - Dummy or C/L bearer position . 48
A.8.3.5.7 MAC info. element - RFP identity. 48
A.8.3.5.8 MAC info. element - Escape . 49
A.8.3.5.9 MAC info. element - Dummy or C/L bearer marker . 49
A.8.3.5.10 MAC info. element - Bearer handover information. 49
A.8.3.5.11 MAC info. element - RFP status . 49
A.8.4 A - field MAC control (M ) messages . 50
T
A.8.4.1 Basic connection control messages . 50
A.8.4.1.1 Basic CC - access request. 50
Page 5
ETS 300 476-3: August 1996
A.8.4.1.2 Basic CC - bearer handover request .50
A.8.4.1.3 Basic CC - connection handover request .50
A.8.4.1.4 Basic CC - unconfirmed access request .50
A.8.4.1.5 Basic CC - bearer confirm .51
A.8.4.1.6 Basic CC - wait .51
A.8.4.1.7 Basic CC - release.51
A.8.4.2 MAC layer test messages .52
A.8.4.2.1 MAC test - force transmit.52
A.8.4.2.2 MAC test - loopback data .53
A.8.4.2.3 MAC test - defeat antenna diversity.53
A.8.4.2.4 MAC test - force bearer handover .53
A.8.4.2.5 MAC test - escape .54
A.8.4.2.6 MAC test - network test .54
A.8.4.2.7 MAC test - clear test modes .55
A.8.4.3 Advanced connection control messages.55
A.8.4.3.1 Advanced CC - access request.55
A.8.4.3.2 Advanced CC - bearer handover request.56
A.8.4.3.3 Advanced CC - connection handover request.56
A.8.4.3.4 Advanced CC - unconfirmed access request .56
A.8.4.3.5 Advanced CC - bearer confirm.57
A.8.4.3.6 Advanced CC - wait.57
A.8.4.3.7 Advanced CC - Attributes_T request.58
A.8.4.3.8 Advanced CC - Attributes_T confirm.59
A.8.4.3.9 Advanced CC - Bandwidth_T request .59
A.8.4.3.10 Advanced CC - Bandwidth_T confirm .60
A.8.4.3.11 Advanced CC - Channel List .61
A.8.4.3.12 Advanced CC - Unconfirmed_dummy.61
A.8.4.3.13 Advanced CC - Unconfirmed_handover.62
A.8.4.3.14 Advanced CC - release.62
A.8.4.4 Quality control messages.63
A.8.4.4.1 QC - antenna switch single bearer request .63
A.8.4.4.2 QC - antenna switch all bearers request .63
A.8.4.4.3 QC - bearer handover request.64
A.8.4.4.4 QC - connection handover request.64
A.8.4.4.5 QC - frequency control single bearer request.65
A.8.4.4.6 QC - frequency control all bearers request.65
A.8.4.5 Broadcast and connectionless (BCL) messages .66
A.8.4.5.1 BCL - CLF, first of 2 transmissions, half slot .66
A.8.4.5.2 BCL - CLF, first of 2 transmissions, full slot .66
A.8.4.5.3 BCL - CLF, first of 2 transmissions, double slot .66
A.8.4.5.4 BCL - CLF, last transmissions, half slot.67
A.8.4.5.5 BCL - CLF, last transmissions, full slot.67
A.8.4.5.6 BCL - CLF, last transmissions, double slot.67
A.8.4.5.7 BCL - C/L single transmissions, no CF or CLS .67
A.8.4.5.8 BCL - CLS service, first transmissions .68
A.8.4.5.9 BCL - change dummy bearer position .68
A.8.4.5.10 BCL - extended system info., A-field procedure.68
A.8.4.5.11 BCL - extended system info., B-field procedure.69
A.8.4.6 Encryption control (EC) messages.69
A.8.4.6.1 EC - Encryption start.69
A.8.4.6.2 EC - Encryption stop.70
A.8.4.7 M message - B - field setup .72
T
A.8.4.8 M message - Escape .72
T
A.8.4.9 M message - TARI.72
T
A.8.5 B - Field Messages .73
A.8.5.1 B - Field - Advanced CC messages .73
A.8.5.1.1 B-field Advanced CC - Access request .73
A.8.5.1.2 B-field Advanced CC - Bearer handover request .74
A.8.5.1.3 B-field Advanced CC - Connection handover request.75
A.8.5.1.4 B-field Advanced CC - Unconfirmed access request .76
A.8.5.1.5 B-field Advanced CC - Bearer confirm .77
A.8.5.1.6 B-field Advanced CC - Wait.77
A.8.5.1.7 B-field Advanced CC - Attributes_B request .78
Page 6
ETS 300 476-3: August 1996
A.8.5.1.8 B-field Advanced CC - Attributes_B confirm. 79
A.8.5.1.9 B-field Advanced CC - Bandwidth_B request . 80
A.8.5.1.10 B-field Advanced CC - Bandwidth_B confirm . 81
A.8.5.1.11 B-field Advanced CC - Channel List. 82
A.8.5.1.12 B-field Advanced CC - Unconfirmed_Dummy . 83
A.8.5.1.13 B-field Advanced CC - Unconfirmed_Handover . 84
A.8.5.1.14 B-field Advanced CC - Release . 85
A.8.5.2 B-field - Null Messages (NM). 85
A.8.5.2.1 B-field - NM No C or CL data in the B-field. 85
F F
A.8.5.2.2 B-field - NM One B-subfield contains C or CL data. 86
F F
A.8.5.2.3 B-field - NM Two B-subfield contain C or CL data. 87
F F
A.8.5.2.4 B-field - NM Three B-subfield contain C or CL data . 87
F F
A.8.5.2.5 B-field - NM Four B-subfield contain C or CL data . 88
F F
A.8.5.2.6 B-field - NM Five B-subfield contain C or CL data. 89
F F
A.8.5.2.7 B-field - NM Six B-subfield contain C or CL data. 89
F F
A.8.5.2.8 B-field - NM Seven B-subfield contain C or CL data . 90
F F
A.8.5.2.9 B-field - NM Eight B-subfield contain C or CL data . 91
F F
A.8.5.2.10 B-field - NM Nine B-subfield contain C or CL data . 91
F F
A.8.5.3 B - Field - Quality control (QC) messages. 92
A.8.5.3.1 B - Field - QC Antenna switch single bearer. 92
A.8.5.3.2 B - Field - QC Antenna switch all bearers. 93
A.8.5.3.3 B - Field - QC Bearer handover . 93
A.8.5.3.4 B - Field - QC Connection handover. 94
A.8.5.3.5 B - Field - QC Frequency control single bearer. 95
A.8.5.3.6 B - Field - QC Frequency control all bearers. 95
A.8.5.3.7 B - Field - QC Reset request first TDMA half frame . 96
A.8.5.3.8 B - Field - QC Reset request second TDMA half frame. 97
A.8.5.3.9 B - Field - QC Reset request both TDMA half frames . 97
A.8.5.3.10 B - Field - QC Reset confirm first TDMA half frame . 98
A.8.5.3.11 B - Field - QC Reset confirm second TDMA half frame. 99
A.8.5.3.12 B - Field - QC Reset confirm both TDMA half frames . 99
A.8.5.3.13 B - Field - QC MOD2 ACK . 100
A.8.5.4 B - Field - Extended system information (ES) messages. 101
A.8.5.4.1 B - Field - ES TARI message. 101
A.8.5.5 B - Field - GF-channel data packet messages . 101
A.8.5.5.1 B - Field - GF-No C data in the B-field. 101
F
A.8.5.5.2 B - Field - GF-One B-subfield contains C data . 102
F
A.8.5.5.3 B - Field - GF-Two B-subfield contain C data. 102
F
A.8.5.5.4 B - Field - GF-Three B-subfield contain C data . 103
F
A.8.5.5.5 B - Field - GF-Four B-subfield contain C data . 103
F
A.8.5.5.6 B - Field - GF-Five B-subfield contain C data . 104
F
A.8.5.5.7 B - Field - GF-Six B-subfield contain C data. 104
F
A.8.5.5.8 B - Field - GF-Seven B-subfield contain C data. 105
F
A.8.5.5.9 B - Field - GF-Eight B-subfield contain C data. 105
F
A.8.5.5.10 B - Field - GF-Nine B-subfield contain C data . 106
F
A.8.5.6 B - Field - Escape message . 106
History. 107
Page 7
ETS 300 476-3: August 1996
Questions
Table A.1: Date of Statement.19
Table A.2: IUT identification .19
Table A.3: SUT identification.19
Table A.4: Product supplier.19
Table A.5: Client identification.20
Table A.6: Contact person identification.20
Table A.7: Identification of protocol.20
Table A.8: Global statement of conformance.20
Table A.9: Service groups supported.21
Table A.10: Connection oriented control services.21
Table A.11: Connection services.21
Table A.12: Symmetric connection oriented services .21
Table A.13: Asymmetric connection oriented services .22
Table A.14: C-plane connection services.22
Table A.15: Broadcast services .22
Table A.16: Connectionless control services .22
Table A.17: Downlink connectionless services .22
Table A.18: Uplink connectionless services.23
Table A.19: CSF multiplexing services .23
Table A.20: D-MAP services .23
Table A.21: B-MAP services .23
Table A.22: E/U mux services.24
Table A.23: C mux mapping services .24
Table A.24: Management services.24
Table A.25: Handover services management.24
Table A.26: C/O single bearer setup procedures.25
Table A.27: C/O multi-bearer symmetric setup procedures.25
Table A.28: C/O multi-bearer asymmetric setup procedures.25
Table A.29: C/O bearer setup procedures .26
Table A.30: C/O connection modification procedures.26
Table A.31: C/O data transfer procedures .26
Table A.32: Handover procedures .26
Table A.33: C/O connection release procedures .27
Table A.34: Broadcast procedures.27
Table A.35: Downlink connectionless procedures .27
Table A.36: Uplink connectionless procedures.27
Table A.37: CSF multiplexing procedures.28
Table A.38: Layer management procedures.28
Table A.39: Extended RF carriers supported.28
Table A.40: Operation modes in Idle_locked state supported .28
Table A.41: Timer supported.29
Table A.42: Protocol constants support .29
Table A.43: Channel selection parameters .30
Table A.44: Channels supported.30
Table A.45: Bearer types supported.30
Table A.46: Slot types supported .30
Table A.47: Tail Identification (Sending P to F).31
Table A.48: Tail Identification (Receipt F to P).31
Table A.49: Q1/BCK bit (Sending P to F).31
Table A.50: Q1/BCK bit (Receipt F to P).31
Table A.51: B-field identification (Sending P to F).32
Table A.52: B-field identification (Receipt F to P).32
Table A.53: Q2 bit (Sending P to F) .32
Table A.54: Q2 bit (Receipt F to P) .32
Table A.55: Identities information (N ) message (Sending P to F) .33
T
Table A.56: Identities information (N ) message (Receipt F to P) .33
T
Table A.57: System information (Q ) message (Receipt F to P).33
T
Table A.58: Paging tail (P ) messages (Receipt F to P) .33
T
Page 8
ETS 300 476-3: August 1996
Table A.59: P messages information supported (Receipt F to P). 34
T
Table A.60: MAC control (M ) messages (Sending P to F) . 34
T
Table A.61: MAC control (M ) messages (Receipt F to P) . 34
T
Table A.62: Basic connection control (Sending P to F) . 35
Table A.63: Basic connection control (Receipt F to P) . 35
Table A.64: MAC layer test messages (Sending P to F) . 35
Table A.65: MAC layer test messages (Receipt F to P) . 36
Table A.66: Advanced connection control messages (Sending P to F) . 36
Table A.67: Advanced connection control messages (Receipt F to P) . 37
Table A.68: Quality control (QC) messages (Sending P to F). 37
Table A.69: Quality control (QC) messages (Receipt F to P). 37
Table A.70: Broadcast and connectionless (BCL) messages (Sending P to F) . 38
Table A.71: Broadcast and connectionless (BCL) messages (Receipt F to P). 38
Table A.72: Encryption control (EC) messages (Sending P to F) . 38
Table A.73: Encryption control (EC) messages (Receipt F to P) . 39
Table A.74: B - Field messages supported (Sending P to F) . 39
Table A.75: B - Field messages supported (Receipt F to P) . 39
Table A.76: B - Field Advanced connection control messages (Sending P to F). 40
Table A.77: B - Field Advanced connection control messages (Receipt F to P). 40
Table A.78: B - Field - Null messages (Sending P to F). 41
Table A.79: B - Field - Null messages (Receipt F to P). 41
Table A.80: B - Field - Quality control messages (Sending P to F) . 42
Table A.81: B - Field - Quality control messages (Receipt F to P) . 42
Table A.82: B - Field - GF-channel data packet messages (Sending P to F) . 43
Table A.83: B - Field - GF-channel data packet messages (Receipt F to P) . 43
Table A.84: NT - Identities Information (Sending P to F). 43
Table A.85: NT - Identities Information (Receipt F to P). 44
Table A.86: QT - Static system information (Receipt F to P) . 44
Table A.87: QT - Extended RF carrier information (Receipt F to P). 44
Table A.88: QT - Fixed part capability (Receipt F to P). 45
Table A.89: QT - Extended fixed part capabilities (Receipt F to P). 45
Table A.90: QT - Secondary access rights identities (Receipt F to P) . 45
Table A.91: QT - Multi-frame number (Receipt F to P) . 46
Table A.92: QT - escape (Receipt F to P) .46
Table A.93: P message - Full page (Receipt F to P). 46
T
Table A.94: P message - Long page (Receipt F to P). 46
T
Table A.95: P message - Short page (Receipt F to P). 47
T
Table A.96.: P message - Zero length page (Receipt F to P) . 47
T
Table A.97: MAC info. element - Fill bits (Receipt F to P) . 47
Table A.98: MAC info. element - Blind full slot (Receipt F to P) . 47
Table A.99.: MAC info. element - Other bearer (Receipt F to P). 48
Table A.100: MAC info. element - Recommended other bearer (Receipt F to P). 48
Table A.101: MAC info. element - Good RFP bearer (Receipt F to P). 48
Table A.102: MAC info. element - Dummy or C/L bearer position (Receipt F to P) . 48
Table A.103.: MAC info. element - RFP identity (Receipt F to P). 48
Table A.104: MAC info. element - Escape (Receipt F to P) . 49
Table A.105: MAC info. element - Dummy or C/L bearer marker (Receipt F to P) . 49
Table A.106: MAC info. element - Bearer handover information (Receipt F to P) . 49
Table A.107: MAC info. element - RFP status (Receipt F to P) . 49
Table A.108: Basic CC - access request (Sending P to F). 50
Table A.109: Basic CC - bearer handover request (Sending P to F) . 50
Table A.110: Basic CC - connection handover request (Sending P to F) . 50
Table A.111: Basic CC - unconfirmed access request (Sending P to F). 50
Table A.112: Basic CC - bearer confirm (Receipt F to P) . 51
Table A.113: Basic CC - wait (Sending P to F). 51
Table A.114: Basic CC - wait (Receipt F to P). 51
Table A.115: Basic CC - release (Sending P to F) . 51
Table A.116: Basic CC - release (Receipt F to P) . 52
Table A.117: MAC test - force transmit (Sending P to F) . 52
Table A.118: MAC test - force transmit (Receipt F to P) . 52
Table A.119: MAC test - loopback data (Sending P to F). 53
Table A.120: MAC test - loopback data (Receipt F to P). 53
Table A.121: MAC test - defeat antenna diversity (Sending P to F). 53
Page 9
ETS 300 476-3: August 1996
Table A.122.: MAC test - force bearer handover (Sending P to F) .53
Table A.123.: MAC test - force bearer handover (Receipt F to P) .54
Table A.124: MAC test - escape (Sending P to F) .54
Table A.125: MAC test - escape (Receipt F to P) .54
Table A.126: MAC test - network test (Sending P to F) .54
Table A.127: MAC test - network test (Receipt F to P) .54
Table A.128: MAC test - clear test modes (Sending P to F) .55
Table A.129: MAC test - clear test modes (Receipt F to P) .55
Table A.130: Advanced CC - access request (Sending P to F).55
Table A.131: Advanced CC - access request (Receipt F to P).55
Table A.132: Advanced CC - bearer handover request (Sending P to F).56
Table A.133: Advanced CC - connection handover request (Sending P to F).56
Table A.134: Advanced CC - connection handover request (Receipt F to P).56
Table A.135: Advanced CC - unconfirmed access request (Sending P to F) .56
Table A.136: Advanced CC - unconfirmed access request (Receipt F to P).57
Table A.137: Advanced CC - bearer confirm (Sending P to F).57
Table A.138: Advanced CC - bearer confirm (Receipt F to P).57
Table A.139: Advanced CC - wait (Sending P to F).57
Table A.140: Advanced CC - wait (Receipt F to P).58
Table A.141: Advanced CC - Attributes_T request (Sending P to F).58
Table A.142: Advanced CC - Attributes_T request (Receipt F to P).58
Table A.143: Advanced CC - Attributes_T confirm (Sending P to F).59
Table A.144: Advanced CC - Attributes_T confirm (Receipt F to P).59
Table A.145: Advanced CC - Bandwidth_T request (Sending P to F) .59
Table A.146: Advanced CC - Bandwidth_T request (Receipt F to P) .60
Table A.147: Advanced CC - Bandwidth_T confirm (Sending P to F) .60
Table A.148: Advanced CC - Bandwidth_T confirm (Receipt F to P) .60
Table A.149: Advanced CC - Channel List (Sending P to F) .61
Table A.150: Advanced CC - Channel List (Receipt F to P) .61
Table A.151: Advanced CC - Unconfirmed_dummy (Sending P to F).61
Table A.152: Advanced CC - Unconfirmed_dummy (Receipt F to P).61
Table A.153: Advanced CC - Unconfirmed_handover (Sending P to F).62
Table A.154: Advanced CC - Unconfirmed_handover (Receipt F to P).62
Table A.155: Advanced CC - release (Sending P to F).62
Table A.156: Advanced CC - release (Receipt F to P) .62
Table A.157: QC - antenna switch single bearer request (Sending P to F) .63
Table A.158: QC - antenna switch single bearer request (Receipt F to P) .63
Table A.159: QC - antenna switch all bearers request (Sending P to F) .63
Table A.160: QC - antenna switch all bearers request (Receipt F to P) .64
Table A.161: QC - bearer handover request (Sending P to F).64
Table A.162: QC - bearer handover request (Receipt F to P).64
Table A.163: QC - connection handover reques
...