SIST EN 1298:2000
(Main)Mobile access and working towers - Rules and guidelines for the preparation of an instruction manual
Mobile access and working towers - Rules and guidelines for the preparation of an instruction manual
This European standard gives rules and guidelines for the preparation of instructions manuals for mobile access and working towers in accordance with HD 1004:1992. A mobile access tower is not intended as a stairtower to provide access to other structures.
Fahrbare Arbeitsbühnen - Regeln und Festlegungen für die Aufstellung einer Aufbau- und Verwendungsanleitung
Diese Europäische Norm gibt Regeln und Richtlinien für die Erarbeitung von Aufbau- und Verwendungsanleitungen für fahrbare Arbeitsbühnen (Fahrgerüste) nach HD 1004:1992. Eine fahrbare Arbeitsbühne ist nicht bestimmt als Treppenturm, um von dort zu anderen Konstruktionen zu gelangen.
Echafaudages roulants de service - Regles et grandes lignes pour la préparation d'un manuel d'opération
Cette norme européenne donne des regles et des grandes lignes pour la préparation des manuels d'instruction des échaufaudages roulants conformes a HD 1004:1992. Un échafaudage roulant n'est pas destiné a l'utilisation comme tour escalier donnant acces a d'autres structures.
Pomični delovni odri na kolesih - Pravila in smernice za pripravo navodil za montažo in uporabo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fahrbare Arbeitsbühnen - Regeln und Festlegungen für die Aufstellung einer Aufbau- und VerwendungsanleitungEchafaudages roulants de service - Regles et grandes lignes pour la préparation d'un manuel d'opérationMobile access and workin
...
This May Also Interest You
This document specifies, for right angle couplers, swivel couplers, sleeve couplers and parallel couplers working by friction:
- materials;
- design requirements;
- strength classes with different structural parameters including values for resistance and stiffness;
- test procedures;
- assessment;
and gives
- recommendations for ongoing production control.
For testing, screw couplers are tightened to a torque of 50 Nm and wedge couplers are tightened with a 500 g hammer until the jarring blow.
- Standard46 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft46 pagesEnglish languagesale 10% offe-Library read for×1 day
EN 74-2 specifies:
- materials;
- design requirements;
- specified values for resistances and stiffnesses which a coupler has to achieve under test;
- test procedures and assessment;
for the following special couplers:
- screw or wedge half couplers, sleeve couplers with shear studs, right angle reduction couplers and swivel reduction couplers.
It gives recommendations for on going production control.
These couplers are for use principally in temporary works. Each coupler is able to be fixed to at least one side to one 48,3 mm diameter steel or aluminium tube. For the other side of reduction couplers, this standard specifies requirements for the diameter and wall thickness of tubes.
For testing, screw couplers are tightened with a torque of 50 Nm and wedge couplers are tightened with a 500 g hammer until the jarring blow.
Other special half couplers such as half couplers attached by riveting, used mainly for members of prefabricated scaffolds, are outside the scope of this document.
NOTE Information on design using special couplers is given in Annex B.
- Standard43 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft41 pagesEnglish languagesale 10% offe-Library read for×1 day
This document applies to transportable masonry and stone cutting-off machines stationary during work, principally used on job site building construction for cutting-off stones, other mineral construction materials and composite materials having at least one supporting surface. The power for the tool rotation is supplied by electrical or internal combustion prime motor. This document deals with all significant hazards pertinent to masonry and stone cutting-off machines for job site (see Clause 4), when they are used as intended and under the conditions foreseen by the manufacturer. This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
These machines are designed for use with rotating diamond cutting-off wheels with a continuous rim and/or segmented rim according to prEN 13236:2017.
This document does not apply to:
- metal cutting-off machines;
- wood and timber sawing machines;
- machines with a feed or descent mechanism other than manual, or with a pedal;
- mobile machines on a trolley travelling on the ground;
- hand-held portable grinding and cutting-off machines;
- hand-held portable grinding and cutting-off machines mounted on a support to be used in a fixed position.
This document does not cover the operation of transportable masonry and stone cutting-off machines in potential explosive atmospheres.
This document covers electrical hazards making reference to relevant European Standards (see 4.3).
Those hazards that are relevant for all mechanical, electrical, hydraulic, pneumatic and other equipment of machinery and that are dealt with in standards for common use are not covered by this document. Reference to pertinent standards of this kind is made where such standards are applicable and so far necessary.
In this document, the masonry and stone cutting-off machines for job site construction are called: "cutting-off machines" or "machines", and cutting-off wheels are also called: "tools".
This document applies primarily to machines which are manufactured after the date of approval of the standard by CEN.
- Standard49 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft43 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Jan-2019
- 23-Jan-2022
- 91.220
- 2006/42/EC
- M/396
- I13
This European standard gives rules and guidelines for the preparation of instructions manuals for mobile access and working towers in accordance with EN 1004.
This standard is intended for all parties involved in the preparation of instructions for use, for example: Suppliers, technical writers, technical illustrators, translators or other people engaged in the work of conceiving and drafting such instructions for use.
- Standard16 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft15 pagesEnglish languagesale 10% offe-Library read for×1 day
The Standard is to specify the safety requirements applicable to truck mixers. A truck mixer as defined by this standard is used for the transportation and mixing of concrete, mortars and mineral building materials. The safety requirements will cover the superstructure (mixer equipment) and its interface with the truck chassis but not cover the truck itself and the elements required for the basic transport function of the truck. Other machinery that can be combined with the truck mixer, such as concrete pumps, distributor masts and conveyor belts will not be covered by the document.
- Standard53 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Nov-2017
- 04-Feb-2021
- 53.060
- 91.220
- 2006/42/EC
- M/396
- I13
This document applies to the design of mobile access and working towers made of prefabricated elements with dimensions which are fixed by the design and with a height up to 12 m (indoors) and up to 8 m (outdoors). This document applies to mobile access and working towers used as temporary work equipment.
This document:
- gives guidelines for the choice of the main dimensions and stabilizing methods,
- gives safety and performance requirements; and
- gives information on complete towers.
This product standard does not apply to scaffolds according to EN 12810-1 and EN 12811-1.
- Standard40 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft38 pagesEnglish languagesale 10% offe-Library read for×1 day
This part of EN 1009 to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of feeding machinery for the mechanical processing of minerals and similar solid materials. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1 for machines that have been designed and built according to the provisions of this part of EN 1009. This part of EN 1009, together with EN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to feeding machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
NOTE 1 EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery.
NOTE 2 Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard. This part of EN 1009 is not applicable to feeding machinery which are manufactured before the date of publication of this document by CEN
- Standard27 pagesEnglish languagesale 10% offe-Library read for×1 day
This part of prEN 1009 to be used together with prEN 1009-1, specifies the safety requirements and their verification for the design and construction of machinery for cleaning, water recycling, mud treatment and sorting (other than screens) for the mechanical processing in quarrying, recycling and processing mineral and by-products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
The requirements of this part are complementary to the common requirements formulated in prEN 1009-1. This part does not repeat the requirements from prEN 1009-1, but adds or replaces them. When requirements of this part of prEN 1009 are different from those which are stated in prEN 1009-1, the requirements of this part of prEN 1009 take precedence over the requirements of prEN 1009-1 for machines that have been designed and built according to the provisions of this part of prEN 1009.
This part of prEN 1009, together with prEN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to machinery for cleaning, recycling, mud treatment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole lifetime of the machine (see Clause 4).
NOTE 1 EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery.
NOTE 2 Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard.
This part of prEN 1009 is not applicable to machinery for cleaning, recycling, mud treatment which are manufactured before the date of publication of this document by CEN.
- Standard39 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft37 pagesEnglish languagesale 10% offe-Library read for×1 day
This part of prEN 1009 to be used together with prEN 1009-1, specifies the safety requirements and their verification for the design and construction of crushing and milling machinery for the mechanical processing in quarrying, recycling and processing mineral and by-products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this part of prEN 1009 are different from those which are stated in prEN 1009-1, the requirements of this part of prEN 1009 take precedence over the requirements of prEN 1009-1 for machines that have been designed and built according to the provisions of this part of prEN 1009.
This part of prEN 1009, together with prEN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to crushing and milling machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
NOTE 1 EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery.
NOTE 2 Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard.
This part of prEN 1009 is not applicable to crushing and milling machinery which are manufactured before the date of publication of this document by CEN.
- Standard32 pagesEnglish languagesale 10% offe-Library read for×1 day
Processing mineral and by-products (cement, lime and gypsum, sand and gravel, industrial minerals, metalliferous ore, production and demolition waste, slag handling, hard and soft rock aggregates, coal) in construction and surface mining.
It deals with the following types of individual machines for the mechanical processing of minerals and similar solid materials:
- feeding machinery as per part 2;
- crushing machinery as per part 3;
- milling machinery as per part 3;
- screening machinery as per part 4;
- machinery for cleaning, water recycling, sorting (other than screens) and mud treatment as per part 5;
- mobile and semi-mobile machinery as per part 6.
This part gives the common safety requirements for mechanical processing machines used for quarrying, recycling and processing mineral and by-products (cement, lime and gypsum, sand and gravel, industrial minerals, metalliferous ore, production and demolition waste, slag handling, hard and soft rock aggregates, coal) in construction and surface mining and is intended to be used in conjunction with one of the prEN 1009-2 to -6. These machine specific parts (prEN 1009-2 to -6) do not repeat the requirements from prEN 1009-1:2017, but add or replace the requirements for the machine type in question.
NOTE The requirements specified in this part of the standard are common to two or more types of machines for the mechanical processing of minerals and similar solid materials.
Specific requirements in prEN 1009-2 to -6 take precedence over the respective requirements of prEN 1009-1:2017.
The standard also covers assemblies of two or more of the mentioned machines which function as an integrated whole. The machines included in the scope of this standard can be fixed, semi-mobile or mobile. The standard covers transportation, erection, commissioning, use and maintenance of single machines or combination of single machines.
This standard deals with significant hazards, common to the types of machines listed in this scope when they are used as intended and under conditions for misuse which are reasonably foreseeable by the manufacturer (see Clause 4) and to the hazards due to the combination of these machines and specifies the appropriate measures to eliminate or reduce the risks arising from the significant hazards.
1.1 Design relating to road traffic regulations is not covered by this standard.
1.2 This standard does not cover hazards arising from the use of the machines in potentially explosive atmospheres as well as from processing of explosive materials and risks related to electromagnetic compatibility.
1.3 This document is not applicable to machinery which are manufactured before the date of publication of this document by CEN.
- Standard89 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft72 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.