SIST EN 13087-10:2012
(Main)Protective helmets - Test methods - Part 10: Resistance to radiant heat
Protective helmets - Test methods - Part 10: Resistance to radiant heat
This European Standard specifies methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard.
This European Standard specifies the method of test for resistance to radiant heat.
Schutzhelme - Prüfverfahren - Teil 10: Beständigkeit gegen Strahlungswärme
Die Europäische Norm legt Prüfverfahren für Schutzhelme fest. Zweck dieser Prüfungen ist die Beurteilung der Gebrauchstauglichkeit des Helmes, wie es in der entsprechenden Norm für Helme festgelegt ist.
Diese Europäische Norm legt das Prüfverfahren zur Beständigkeit gegen Strahlungswärme fest.
Casques de protection - Méthodes d'essai - Partie 10: Résistance à la chaleur radiante
La présente Norme européenne décrit des méthodes d'essai pour les casques de protection. Ces essais sont
destinés à permettre l’évaluation de la performance du casque spécifiée dans la norme de casque appropriée.
La présente Norme européenne spécifie la méthode d'essai pour la résistance à la chaleur radiante.
Varovalne čelade - Preskusne metode - 10. del: Odpornost proti toplotnemu sevanju
Ta evropski standard določa preskusne metode za varovalne čelade. Namen teh preskusov je omogočiti oceno lastnosti čelade, kot je določeno v ustreznem standardu za čelado. Ta evropski standard določa preskusne metode za odpornost proti toplotnemu sevanju.
General Information
- Status
- Published
- Public Enquiry End Date
- 09-Oct-2011
- Publication Date
- 03-Jun-2012
- Technical Committee
- OVP - Personal protecting equipment
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 11-May-2012
- Due Date
- 16-Jul-2012
- Completion Date
- 04-Jun-2012
Relations
- Replaces
SIST EN 13087-10:2001 - Protective helmets - Test methods - Part 10: Resistance to radiant heat - Effective Date
- 01-Jul-2012
Overview
EN 13087-10:2012 - published by CEN - is the European test method for assessing the resistance of protective helmets to radiant heat. It forms Part 10 of the EN 13087 series of helmet test methods and is intended to be used alongside product-specific helmet standards to determine whether a helmet meets required performance limits under defined radiant-heat exposure conditions.
Key topics and technical requirements
- Scope and purpose: Specifies the test method for resistance to radiant heat to enable assessment of helmet performance as required by the appropriate helmet standard.
- Prerequisites: The applicable helmet standard must define performance requirements, number of samples, sample preparation, conditioning and test sequences, heat flux intensity and fitting instructions.
- Test principle: A calibrated infra‑red heater irradiates a helmet mounted on an instrumented headform while temperature sensors on the headform record temperature rise.
- Apparatus and components:
- Heater with a flat radiating surface of (250 ± 5) mm × (250 ± 5) mm and peak emission wavelength between 2 µm and 3 µm.
- Calibrated radiometer/calorimeter to set and verify heat flux intensity.
- Test headform complying with EN 960:2006, mounted with a nominal 30° lateral inclination.
- Three calibrated temperature sensing elements (thermocouples on copper discs of (7 ± 1) mm diameter) positioned at defined points on the headform surface.
- Procedure highlights:
- Measure and set distance d between heater and helmeted headform; verify heat flux with radiometer.
- Expose the helmet to radiant heat for (180 ± 2) s and record temperature changes.
- Report the maximum temperature difference between pre‑ and post‑exposure measurements.
- Allow at least 4 hours cooling before further testing.
- Measurement quality: Annex A requires an estimate of the uncertainty of measurement to be reported with test results.
Applications and users
- Product test laboratories performing conformity and type testing of helmets.
- Helmet manufacturers validating designs, materials and protective performance against radiant heat.
- Safety engineers and procurement specialists specifying helmets for industries exposed to thermal radiation (e.g., firefighting support equipment, industrial thermal hazard zones).
- Notified bodies and certification organizations using standardized methods to assess compliance with European PPE requirements.
Related standards
- EN 13087 series (Parts 1–10) - overall helmet test methods framework.
- EN 13087-1 - Conditions and conditioning (referenced for ambient/test conditioning).
- EN 960:2006 - Headforms for helmet testing.
- Annex ZA of EN 13087-10:2012 links the method to the essential requirements of EU Directive 89/686/EEC (PPE).
Keywords: EN 13087-10:2012, protective helmets, resistance to radiant heat, test methods, radiant heat test, headform, radiometer, calorimeter, EN 960.
Frequently Asked Questions
SIST EN 13087-10:2012 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Protective helmets - Test methods - Part 10: Resistance to radiant heat". This standard covers: This European Standard specifies methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard. This European Standard specifies the method of test for resistance to radiant heat.
This European Standard specifies methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard. This European Standard specifies the method of test for resistance to radiant heat.
SIST EN 13087-10:2012 is classified under the following ICS (International Classification for Standards) categories: 13.340.20 - Head protective equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13087-10:2012 has the following relationships with other standards: It is inter standard links to SIST EN 13087-10:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13087-10:2012 is associated with the following European legislation: EU Directives/Regulations: 2016/425, 89/686/EEC; Standardization Mandates: M/031. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 13087-10:2012 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SORWQHPXVHYDQMXSchutzhelme - Prüfverfahren - Teil 10: Beständigkeit gegen StrahlungswärmeCasques de protection - Méthodes d'essai - Partie 10: Résistance à la chaleur radianteProtective helmets - Test methods - Part 10: Resistance to radiant heat13.340.20Varovalna oprema za glavoHead protective equipmentICS:Ta slovenski standard je istoveten z:EN 13087-10:2012SIST EN 13087-10:2012en,fr,de01-julij-2012SIST EN 13087-10:2012SLOVENSKI
STANDARDSIST EN 13087-10:20011DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13087-10
February 2012 ICS 13.340.20 Supersedes EN 13087-10:2000English Version
Protective helmets - Test methods - Part 10: Resistance to radiant heat
Casques de protection - Méthodes d'essai - Partie 10: Résistance à la chaleur radiante
Schutzhelme - Prüfverfahren - Teil 10: Beständigkeit gegen Strahlungswärme This European Standard was approved by CEN on 17 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13087-10:2012: ESIST EN 13087-10:2012
Test results – Uncertainty of measurement .9Annex B (informative)
Significant technical changes between this European Standard and EN 13087-10:2000. 10Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC Personal Protective Equipment . 11 SIST EN 13087-10:2012
1 To be published. SIST EN 13087-10:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...