SIST EN ISO 17697:2016
(Main)Footwear - Test methods for uppers, lining and insocks - Seam strength (ISO 17697:2016)
Footwear - Test methods for uppers, lining and insocks - Seam strength (ISO 17697:2016)
This European Standard specifies two test methods for determining the seam strength of uppers, lining or insocks, irrespective of the material, in order to assess the suitability for the end use. These methods are : Method A : Needle perforations. For determining the force required to pull a row of needles through an upper material, in a direction perpendicular to the row. Method B : Stitched seams. For determining the breaking strength of stitched seams in shoe upper and lining materials. This method is applicable to seams cut from shoes or made up to simulate footwear constructions.
Schuhe - Prüfverfahren für Obermaterialien, Futter und Decksohlen - Nahtfestigkeit (ISO 17697:2016)
Dieses Dokument legt zwei Prüfverfahren zur Bestimmung der Nahtfestigkeit von Obermaterialien, Futter oder Decksohlen unabhängig vom Werkstoff fest, um die Eignung für den Endgebrauch zu bewerten.
Diese Verfahren sind:
Verfahren A: Nadelperforationen. Zur Bestimmung der Kraft, die erforderlich ist, um eine Reihe von Nadeln durch einen Werkstoff für Obermaterial in einer Richtung senkrecht zur Nahtreihe zu ziehen.
Verfahren B: Steppnähte. Zur Bestimmung der Bruchfestigkeit (Reißfestigkeit) von Steppnähten in Schuhobermaterialien und Futterwerkstoffen. Dieses Verfahren ist anwendbar auf, aus Schuhen geschnittene Nähte oder auf Nähte, die zur Nachahmung von Schuhaufbauten zusammengesetzt wurden.
Chaussures - Méthodes d'essai relatives aux tiges, doublures et premières de propreté - Résistance des piqûres (ISO 17697:2016)
ISO 17697:2016 spécifie deux méthodes d'essai permettant de déterminer la résistance des piqûres de la tige, de la doublure ou de la première de propreté, quel que soit le matériau qui les compose, afin d'évaluer leur aptitude à l'utilisation finale.
Ces méthodes sont les suivantes:
- méthode A: perforations à l'aiguille. Cette méthode permet de déterminer la force requise pour traverser le matériau de la tige avec une rangée d'aiguilles dans le sens perpendiculaire;
- méthode B: piqûres. Cette méthode permet de déterminer la résistance à la rupture des piqûres dans la tige et dans les matériaux de la doublure. Elle s'applique à des piqûres prélevées sur des chaussures ou à des piqûres réalisées pour simuler la fabrication de chaussures.
Obutev - Preskusne metode za zgornje dele, podloge in vložke - Trdnost šiva (ISO 17697:2016)
Ta evropski standard določa dve preskusni metodi za določanje trdnosti šiva na zgornjih delih, podlogi ali vložkih ne glede na material za namene ocenjevanja primernosti za končno uporabo. Ti dve metodi sta naslednji: Metoda A: perforacije igel. Za določanje sile, ki je potrebna za izvlečenje vrste igel skozi zgornji material v pravokotni smeri glede na vrsto. Metoda B: šivi. Za določanje upogibne trdnosti šivov na zgornjih delih in podlogi obutve. Ta metoda se uporablja za šive, izrezane z obutve ali izdelane za simulacijo konstrukcije obutve.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17697:2016
01-julij-2016
1DGRPHãþD
SIST EN 13572:2004
Obutev - Preskusne metode za zgornje dele, podloge in vložke - Trdnost šiva (ISO
17697:2016)
Footwear - Test methods for uppers, lining and insocks - Seam strength (ISO
17697:2016)
Schuhe - Prüfverfahren für Obermaterialien, Futter und Decksohlen - Nahtfestigkeit (ISO
17697:2016)
Chaussures - Méthodes d'essai relatives aux tiges, doublures et premières de propreté -
Résistance des piqûres (ISO 17697:2016)
Ta slovenski standard je istoveten z: EN ISO 17697:2016
ICS:
61.060 Obuvala Footwear
SIST EN ISO 17697:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17697:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 17697:2016
EN ISO 17697
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2016
EUROPÄISCHE NORM
ICS 61.060 Supersedes EN 13572:2001
English Version
Footwear - Test methods for uppers, lining and insocks -
Seam strength (ISO 17697:2016)
Chaussures - Méthodes d'essai relatives aux tiges, Schuhe - Prüfverfahren für Obermaterialien, Futter und
doublures et premières de propreté - Résistance des Decksohlen - Nahtfestigkeit (ISO 17697:2016)
piqûres (ISO 17697:2016)
This European Standard was approved by CEN on 15 April 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17697:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17697:2016
EN ISO 17697:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17697:2016
EN ISO 17697:2016 (E)
European foreword
This document (EN ISO 17697:2016) has been prepared by Technical Committee CEN/TC 309
“Footwear” the secretariat of which is held by AENOR, in collaboration with Technical Committee
ISO/TC 216 “Footwear”.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2016, and conflicting national standards
shall be withdrawn at the latest by November 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 13572:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17697:2016 has been approved by CEN as EN ISO 17697:2016 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17697:2016
---------------------- Page: 6 ----------------------
SIST EN ISO 17697:2016
INTERNATIONAL ISO
STANDARD 17697
Second edition
2016-05-01
Footwear — Test methods for uppers,
lining and insocks — Seam strength
Chaussures — Méthodes d’essai relatives aux tiges, doublures et
premières de propreté — Résistance des piqûres
Reference number
ISO 17697:2016(E)
©
ISO 2016
---------------------- Page: 7 ----------------------
SIST EN ISO 17697:2016
ISO 17697:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 17697:2016
ISO 17697:2016(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus and material . 2
4.1 Method A . 2
4.2 Method B . 3
5 Sampling and conditioning . 4
5.1 Method A . 4
5.2 Method B . 4
6 Test method . 7
6.1 Method A . 7
6.1.1 Principle . 7
6.1.2 Procedure . 7
6.2 Method B . 8
6.2.1 Principle . 8
6.2.2 Procedure . 8
7 Expression of results . 8
7.1 Method A . 8
7.2 Method B . 9
8 Test report . 9
8.1 Method A . 9
8.2 Method B . 9
Bibliography .10
© ISO 2016 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 17697:2016
ISO 17697:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
ISO 17697 was prepared by the European Committee Standardization (CEN) Technical Committee
CEN/TC 309, Footwear, in collaboration with ISO Technical Committee TC 216, Footwear, in accordance
with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 17697:2003), which has been technically
revised.
iv © ISO 2016 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 17697:2016
INTERNATIONAL STANDARD ISO 17697:2016(E)
Footwear — Test methods for uppers, lining and insocks —
Seam strength
1 Scope
This International Standard specifies two test methods for determining the seam strength of uppers,
lining or insocks, irrespective of the material, in order to assess the suitability for the end use.
These methods are as follows.
— Method A: Needle perforations. For determining the force required to pull a row of needles through
an upper material, in a direction perpendicular to the row.
— Method B: Stitched seams. For determining the breaking strength of stitched seams in shoe upper
and lining materials. This method is applicable to seams cut from shoes or made up to simulate
footwear constructions.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 7500-1, Metallic materials — Verification of static uniaxial testing machines — Part 1:
Tension/compression testing machines — Verification and calibration of the force-measuring system
ISO 17709, Footwear — Sampling location, preparation and duration of conditioning of samples and
test pieces
ISO 18454, Footwear — Standard atmospheres for conditioning and testing of footwear and components
for footwear
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
seam strength
breaking strength of a stitched seam as determined under specified conditions using a tensile
testing machine
3.2
upper
materials forming the outer face of the footwear which is attached to the sole assembly and covers the
upper dorsal surface of the foot
Note 1 to entry: In the case of boots, this also includes the outer face of the material covering the leg. Only the
materials that are visible are included, no account should be made of underlying materials.
© ISO 2016 – All rights reserved 1
---------------------- Page: 11 ----------------------
SIST EN ISO 17697:2016
ISO 17697:2016(E)
3.3
complete upper assembly
finished upper, fully seamed, joined or laminated as appropriate, comprising the centre material
and any lining(s) together with all components such as interlinings, adhesives, membrane
...
SLOVENSKI STANDARD
kSIST FprEN ISO 17697:2016
01-marec-2016
Obutev - Preskusne metode za zgornje dele, podloge in vložke - Trdnost šiva
(ISO/FDIS 17697:2016)
Footwear - Test methods for uppers, lining and insocks - Seam strength (ISO/FDIS
17697:2016)
Schuhe - Prüfverfahren für Obermaterialien, Futter und Decksohlen - Nahtfestigkeit
(ISO/FDIS 17697:2016)
Chaussures - Méthodes d'essai relatives aux tiges, doublures et premières de propreté -
Résistance des piqûres (ISO/FDIS 17697:2016)
Ta slovenski standard je istoveten z: FprEN ISO 17697
ICS:
61.060 Obuvala Footwear
kSIST FprEN ISO 17697:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST FprEN ISO 17697:2016
---------------------- Page: 2 ----------------------
kSIST FprEN ISO 17697:2016
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 17697
ISO/TC 216
Footwear — Test methods for uppers,
Secretariat: AENOR
lining and insocks — Seam strength
Voting begins on:
201601 14
Chaussures — Méthodes d’essai relatives aux tiges, doublures et
premières de propreté — Résistance des piqûres
Voting terminates on:
201603 14
Please see the administrative notes on page iii
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/FDIS 17697:2015(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2015
---------------------- Page: 3 ----------------------
kSIST FprEN ISO 17697:2016
ISO/FDIS 17697:2015(E)
ISO/CEN PARALLEL PROCESSING
This final draft has been developed within the European Committee for Standardization (CEN), and processed
under the CEN-lead mode of collaboration as defined in the Vienna Agreement. The final draft was established
on the basis of comments received during a parallel enquiry on the draft.
This final draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel two-
month approval vote in ISO and two month formal vote in CEN.
Positive votes shall not be accompanied by comments.
Negative votes shall be accompanied by the relevant technical reasons.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
---------------------- Page: 4 ----------------------
kSIST FprEN ISO 17697:2016
ISO/FDIS 17697:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus and material . 2
4.1 Method A . 2
4.2 Method B . 3
5 Sampling and conditioning . 4
5.1 Method A . 4
5.2 Method B . 4
6 Test method . 7
6.1 Method A . 7
6.1.1 Principle . 7
6.1.2 Procedure . 7
6.2 Method B . 8
6.2.1 Principle . 8
6.2.2 Procedure . 8
7 Expression of results . 8
7.1 Method A . 8
7.2 Method B . 9
8 Test report . 9
8.1 Method A . 9
8.2 Method B . 9
Bibliography .10
© ISO 2015 – All rights reserved iii
---------------------- Page: 5 ----------------------
kSIST FprEN ISO 17697:2016
ISO/FDIS 17697:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
ISO 17697 was prepared by the European Committee Standardization (CEN) Technical Committee
CEN/TC 309, Footwear, in collaboration with ISO Technical Committee TC 216, Footwear, in accordance
with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 17697:2003), which has been
technically revised.
iv © ISO 2015 – All rights reserved
---------------------- Page: 6 ----------------------
kSIST FprEN ISO 17697:2016
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 17697:2015(E)
Footwear — Test methods for uppers, lining and insocks —
Seam strength
1 Scope
This International Standard specifies two test methods for determining the seam strength of uppers,
lining or insocks, irrespective of the material, in order to assess the suitability for the end use.
These methods are as follows.
— Method A: Needle perforations. For determining the force required to pull a row of needles through
an upper material, in a direction perpendicular to the row.
— Method B: Stitched seams. For determining the breaking strength of stitched seams in shoe upper
and lining materials. This method is applicable to seams cut from shoes or made up to simulate
footwear constructions.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 75001, Metallic materials — Verification of static uniaxial testing machines — Part 1:
Tension/compression testing machines — Verification and calibration of the force-measuring system
ISO 17709, Footwear — Sampling location, preparation and duration of conditioning of samples and test
pieces
ISO 18454, Footwear — Standard atmospheres for conditioning and testing of footwear and
components for footwear
3 Terms a nd definiti ons
For the purposes of this document, the following terms and definitions apply.
3.1
seam strength
breaking strength of a stitched seam as determined under specified conditions using a tensile
testing machine
3.2
upper
materials forming the outer face of the footwear which is attached to the sole assembly and covers the
upper dorsal surface of the foot
Note 1 to entry: In the case of boots, this also includes the outer face of the material covering the leg. Only the
materials that are visible are included, no account should be made of underlying materials.
© ISO 2015 – All rights reserved 1
---------------------- Page: 7 ----------------------
kSIST FprEN ISO 17697:2016
ISO/FDIS 17697:2015(E)
3.3
complete upper assembly
finished upper, fully seamed, joined or laminated as appropriate, comprising the centre material
and any lining(s) together with all components such as interlinings, adhesives, membranes, foams or
reinforcements, but excluding toe puffs and stiffeners
Note 1 to entry: The complete upper assembly can be flat, 2-dimensional or comprise lasted upper in the
final footwear.
4 Apparatus and material
The following apparatus and material shall be used.
4.1 Method A
4.1.1 Tensile testing machine, with a jaw separation rate of (100 ± 10) mm/min, a force range
appropriate to the specimen under test (this will usually be less than 500 N for footwear upper materials),
capable of measuring forces to an accuracy greater than 2 % as specified by Class 2 in ISO 7500-1.
4.1.2 Needle holding jig, see Figure 1, including the following.
4.1.2.1 Two rectangular rigid plates, each of minimum width 30 mm and maximum thickness 6 mm.
Each of the two plates is drilled with 17 holes of diameter (1,1 ± 0,1) mm. The holes shall be in a straight
line parallel to and approximately 5 mm from one end of the plate. The holes should be evenly spaced so
that the centres of the two extreme holes are (26,5 ± 0,5) mm apart.
4.1.2.2 One spacing plate, of width similar to the drilled plates and of thickness (3,5 ± 0,5) mm.
4.1.2.3 Means of securing the spacing plate, to the surface of one of the drilled plates such that the
distance between the end of the spacing plate and the centre line of the row of holes in the other pl
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.