SIST ISO 8061:2005/A1:2011
(Amendment)Alpine ski-bindings - Selection of release torque values (ISO 8061:2004/Amd 1:2006)
Alpine ski-bindings - Selection of release torque values (ISO 8061:2004/Amd 1:2006)
This International Standard specifies methods for the selection of the release torques for alpine ski-bindings in current use, and gives information necessary to determine the release torques. It applies to torque-measuring binding-test machines. It may be inappropriate for non-mechanical bindings or bindings used with boots which reach more than halfway up the lower leg. NOTE Manufacturers may use either of the two specified methods as the basis for their recommended release torques. Release torques are to be recommended for use by ski-binding manufacturers in their instructions for installation and use, and by ski shops for the adjustment of already mounted ski-bindings.
Fixations de skis alpins — Sélection des valeurs du couple de déclenchement — Amendement 1
Varnostne vezi za alpske smuči - Metode za izbor mejnih vrednosti navora odpenjanj - Dopolnilo A1(ISO 8061:2004/Amd 1:2006)
Ta mednarodni standard določa metode za izbor navorov odpenjanja za varnostne vezi za alpsko smučanje pri trenutni uporabi in podaja informacije, potrebne za določanje navora odpenjanja. Velja za preskusne stroje za merjenje navora odpenjanj. Lahko je neprimeren za nemehanske varnostne vezi ali vezi, ki se uporabljajo s čevlji, ki segajo nad polovico spodnjega dela noge. OPOMBA: Proizvajalci lahko uporabljajo katero koli od dveh določenih metod kot osnovo za priporočene navore odpenjanj. Uporaba navorov odpenjanja se priporoča proizvajalcem varnostnih vezi za smuči v njihovih navodilih za montažo in uporabo ter trgovinam s smučarsko opremo za prilagoditev že montiranih varnostnih vezi za smuči.
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 8061
Third edition
2004-04-01
AMENDMENT 1
2006-11-01
Alpine ski-bindings — Selection
of release torque values
AMENDMENT 1
Fixations de skis alpins — Sélection des valeurs du couple de
déclenchement
AMENDEMENT 1
Reference number
ISO 8061:2004/Amd.1:2006(E)
©
ISO 2006
---------------------- Page: 1 ----------------------
ISO 8061:2004/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 8061:2004/Amd.1:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are c
...
NORME ISO
INTERNATIONALE 8061
Troisième édition
2004-04-01
AMENDEMENT 1
2006-11-01
Fixations de skis alpins — Sélection des
valeurs du couple de déclenchement
AMENDEMENT 1
Alpine ski-bindings — Selection of release torque values
AMENDMENT 1
Numéro de référence
ISO 8061:2004/Amd.1:2006(F)
©
ISO 2006
---------------------- Page: 1 ----------------------
ISO 8061:2004/Amd.1:2006(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2006
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2006 – Tous droits réservés
---------------------- Page: 2 ----------------------
ISO 8061:2004/Amd.1:2006(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes inte
...
SLOVENSKI STANDARD
SIST ISO 8061:2005/A1:2011
01-marec-2011
9DUQRVWQHYH]L]DDOSVNHVPXþL0HWRGH]DL]ERUPHMQLKYUHGQRVWLQDYRUD
RGSHQMDQM'RSROQLOR$ ,62 $PG
Alpine ski-bindings - Selection of release torque values (ISO 8061:2004/Amd 1:2006)
Ta slovenski standard je istoveten z: ISO 8061:2004/Amd 1:2006
ICS:
97.220.20 Oprema za zimske športe Winter sports equipment
SIST ISO 8061:2005/A1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 8061:2005/A1:2011
---------------------- Page: 2 ----------------------
SIST ISO 8061:2005/A1:2011
INTERNATIONAL ISO
STANDARD 8061
Third edition
2004-04-01
AMENDMENT 1
2006-11-01
Alpine ski-bindings — Selection
of release torque values
AMENDMENT 1
Fixations de skis alpins — Sélection des valeurs du couple de
déclenchement
AMENDEMENT 1
Reference number
ISO 8061:2004/Amd.1:2006(E)
©
ISO 2006
---------------------- Page: 3 ----------------------
SIST ISO 8061:2005/A1:2011
ISO 8061:2004/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 8061:2005/A1:2011
ISO 8061:2004/Amd.1:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. I
...
SLOVENSKI STANDARD
SIST ISO 8061:2005/oAmd 1:2011
01-januar-2011
9DUQRVWQHYH]L]DDOSVNHVPXþL0HWRGH]DL]ERUPHMQLKYUHGQRVWLQDYRUD
RGSHQMDQM
ISO 8061:2004/Amd 1:2006
Ta slovenski standard je istoveten z: ISO 8061:2004/Amd 1:2006
ICS:
97.220.20 Oprema za zimske športe Winter sports equipment
SIST ISO 8061:2005/oAmd 1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 8061:2005/oAmd 1:2011
---------------------- Page: 2 ----------------------
SIST ISO 8061:2005/oAmd 1:2011
INTERNATIONAL ISO
STANDARD 8061
Third edition
2004-04-01
AMENDMENT 1
2006-11-01
Alpine ski-bindings — Selection
of release torque values
AMENDMENT 1
Fixations de skis alpins — Sélection des valeurs du couple de
déclenchement
AMENDEMENT 1
Reference number
ISO 8061:2004/Amd.1:2006(E)
©
ISO 2006
---------------------- Page: 3 ----------------------
SIST ISO 8061:2005/oAmd 1:2011
ISO 8061:2004/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 8061:2005/oAmd 1:2011
ISO 8061:2004/Amd.1:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
Internati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.