iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 10219-2:1998

(Main)

Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

This Part of this European Standard specifies the tolerances for cold formed welded circular, square and rectangular structural hollow sections and gives the dimensions and sectional properties for a range of standard sizes.  For the technical delivery requirements see EN 10219-1.

Kaltgefertigte geschweißte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 2: Grenzabmaße, Maße und statische Werte

Dieser Teil 2 der europäischen Norm EN 10219 enthält die Anforderungen an die Grenzabmasse und Formtoleranzen von kaltgefertigten geschweißten Hohlprofilen mit kreisförmigem, quadratischem oder rechteckigem Querschnitt füt den Stahlbau; er enthält ferner Angaben über die Nennmaße und statischen Werte für eine Reihe von Standardabmessungen. Wegen der technischen Lieferbedingunegen siehe EN 10219-1.

Profils creux pour la construction formés a froid en aciers de construction non-alliés et a grains fins - Partie 2: Tolérances, dimensions et caractéristiques du profil

La présente partie de la norme européenne spécifie les tolérances concernant les profils creux formés a froid de section rectangulaire, carrée et circulaire destinés a la construction, ainsi que les dimensions et les caractéristiques du profil pour toute une gamme de profils standards. Pour les conditions techniques de livraison, voir l'EN 10219-1.

Hladno oblikovani varjeni votli konstrukcijski profili iz nelegiranih in drobnozrnatih jekel - 2. del: Mere, mejni odstopki in značilnosti profilov

General Information

Status
Withdrawn
Publication Date
31-Jul-1998
Withdrawal Date
30-Jun-2006
ICS
77.140.45 - Non-alloyed steels
77.140.70 - Steel profiles
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jul-2006
Due Date
01-Jul-2006
Completion Date
01-Jul-2006
Mandate
M/BC/CEN/89/10 - ECISS - 3rd programme
Ref Project
EN 10219-2:1997 - Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

Relations

Replaced By
SIST EN 10219-2:2006 - Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
Effective Date
01-Jul-2006

Buy Standard

EN 10219-2:1998EN 10219-2:1998
PreviousNext
Standard
EN 10219-2:1998
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kaltgefertigte geschweißte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 2: Grenzabmaße, Maße und statische WerteProfils creux pour la construction formés a froid en aciers de construction non-alliés et a grains fins - Partie 2: Tolérances, dimensions et caractéristiques du profilCold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties77.140.70Jekleni profiliSteel profiles77.140.45Nelegirana jeklaNon-alloyed steelsICS:Ta slovenski standard je istoveten z:EN 10219-2:1997SIST EN 10219-2:1998en01-avgust-1998SIST EN 10219-2:1998SLOVENSKI
STANDARD



SIST EN 10219-2:1998



SIST EN 10219-2:1998



SIST EN 10219-2:1998



SIST EN 10219
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 10248-1:2023(Main)
Hot-rolled steel sheet piles - Part 1: Technical delivery conditions
EN 10248-1:2023

This document specifies the requirements for hot rolled steel sheet piles in respect of its chemical composition, mechanical properties and conditions of delivery. The products specified are for general, structural and civil engineering works. The types of steel sheet piles covered by this standard are: Z-shaped, U-shaped, straight web, H-shaped with their interlocking bars

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10219-3:2020(Main)
Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
EN 10219-3:2020

This part of this standard specifies the technical delivery conditions for electric welded and submerged arc welded cold formed structural steel hollow sections for mechanical engineering purposes of circular, square, rectangular or elliptical forms and applies to structural hollow sections formed cold without subsequent heat treatment other than the heat treatment of the weld line.
NOTE 1   The requirements for tolerances, dimensions and sectional properties can be found in EN 10219-2.
NOTE 2   The attention of users is drawn to the fact that whilst cold formed grades in EN 10219-3 can have equivalent mechanical properties to hot-finished grades in EN 10210-3 the sectional properties of square and rectangular hollow sections in EN 10219-2 and EN 10210-2 are not equivalent.
NOTE 3   A range of steel grades is specified in this document and the user can select the grade most appropriate to the intended use and service conditions. The grades and mechanical properties, but not the final supply condition of cold formed hollow sections are generally comparable with those in EN 10025-2, EN 10025-3, EN 10025-4, EN 10025-5, EN 10025-6, EN 10149-2 and EN 10149-3.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10219-2:2019(Main)
Cold formed welded steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
EN 10219-2:2019

This part of prEN 10219 specifies tolerances for cold formed welded circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 40 mm, in the following size ranges:
Circular: Outside diameters up to 2 500 mm
Square: Outside dimensions up to 500 mm x 500 mm
Rectangular: Outside dimensions up to 500 mm x 300 mm
Elliptical: Outside dimensions up to 480 mm x 240 mm
The formulae for calculating sectional properties of sections manufactured to the dimensional tolerances of this standard, to be used for the purposes of structural design, are given in Annex B.
Dimensions and sectional properties for a limited range of more common sizes are given in Annex C.
The general conditions are specified in prEN 10219-1 (product characteristics, test methods and performance criteria that apply under the Construction Products Regulations) and the technical delivery conditions in prEN 10219-2.
NOTE   The designation of the sections' major axis (yy) and its minor axis (zz) align with the axis designation used for structural design in the structural Eurocodes.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10210-2:2019(Main)
Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
EN 10210-2:2019

This part of prEN 10210 specifies tolerances for hot finished circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 120 mm, in the following size ranges:
Circular: Outside diameters up to 2 500 mm
Square: Outside dimensions up to 800 mm x 800 mm
Rectangular: Outside dimensions up to 750 mm x 500 mm
Elliptical: Outside dimensions up to 500 mm x 250 mm
The formulae for calculating sectional properties of sections manufactured to the dimensional tolerances of this standard, to be used for the purposes of structural design, are given in Annex A.
Dimensions and sectional properties for a limited range covering the more common sizes are given in Annex B.
The general conditions are specified in prEN 10210-1 (product characteristics, test methods and performance criteria that apply under the Construction Products Regulations) and the technical delivery conditions in prEN 10210-2.
NOTE   The designation of the sections' major axis (yy) and its minor axis (zz) align with the axis designation used for structural design in the structural Eurocodes.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10219-1:2006(Main)
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10219-1:2006

This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10219-2.
NOTE   A range of steel grades is specified in this European Standard and the user should select the grade appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are compatible with those in EN 10025-2 and EN 10025-3.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10210-1:2006(Main)
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10210-1:2006

This part of this European Standard specifies technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10210-2.
NOTE   A range of material grades is specified in this standard and the user should select the grade appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are compatible with those in EN 10025-2 and EN 10025-3.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10249-2:1998(Main)
Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
EN 10249-2:1995

This part of this European Standard specifies the tolerances on dimensions, squareness of ends, straightness and mass of cold formed non alloy steel sheet piles which are defined in EN 10249-1.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10248-2:1998(Main)
Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
EN 10248-2:1995

This part of this European standard specifies the tolerances on dimensions, squareness of ends, straightness and mass of hot rolled non alloy steel sheet piles which are defined in EN 10248-1.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10249-1:1998(Main)
Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 10249-1:1995

This part of this European Standard specifies the requirements for cold formed non alloy steel sheet piling produced from hot rolled strip or sheet with a thickness equal to or greater than 2mm in respect of its chemical composition, mechanical and technological properties and delivery conditions. The products specified are for general, structural and civil engineering works. Requirements concerning the tolerances on shape and dimensions are specified in Part 2 of this European Standard.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 10248-1:2006
Hot-rolled steel sheet piling - Part 1: Technical delivery conditions
prEN 10248-1

This part of this European Standard specifies the requirements for hot rolled non alloy steel sheet piling in respect of its chemical composition, mechanical properties and conditions of delivery.The products specified are for general, structural and civil engineering works.Requirements in respect of tolerances on shape and dimensions are specified in Part 2 of this European Standard.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day