EN 10219-2:1997
(Main)Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
This Part of this European Standard specifies the tolerances for cold formed welded circular, square and rectangular structural hollow sections and gives the dimensions and sectional properties for a range of standard sizes. For the technical delivery requirements see EN 10219-1.
Kaltgefertigte geschweißte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 2: Grenzabmaße, Maße und statische Werte
Dieser Teil 2 der europäischen Norm EN 10219 enthält die Anforderungen an die Grenzabmasse und Formtoleranzen von kaltgefertigten geschweißten Hohlprofilen mit kreisförmigem, quadratischem oder rechteckigem Querschnitt füt den Stahlbau; er enthält ferner Angaben über die Nennmaße und statischen Werte für eine Reihe von Standardabmessungen. Wegen der technischen Lieferbedingunegen siehe EN 10219-1.
Profils creux pour la construction formés à froid en aciers de construction non-alliés et à grains fins - Partie 2: Tolérances, dimensions et caractéristiques du profil
La présente partie de la norme européenne spécifie les tolérances concernant les profils creux formés à froid de section rectangulaire, carrée et circulaire destinés à la construction, ainsi que les dimensions et les caractéristiques du profil pour toute une gamme de profils standards. Pour les conditions techniques de livraison, voir l'EN 10219-1.
Hladno oblikovani varjeni votli konstrukcijski profili iz nelegiranih in drobnozrnatih jekel - 2. del: Mere, mejni odstopki in značilnosti profilov
General Information
- Status
- Withdrawn
- Publication Date
- 19-Aug-1997
- Withdrawal Date
- 25-Apr-2006
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 10/SC 1 - Structural steel - Hollow sections
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 26-Apr-2006
- Completion Date
- 26-Apr-2006
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10219-2:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties". This standard covers: This Part of this European Standard specifies the tolerances for cold formed welded circular, square and rectangular structural hollow sections and gives the dimensions and sectional properties for a range of standard sizes. For the technical delivery requirements see EN 10219-1.
This Part of this European Standard specifies the tolerances for cold formed welded circular, square and rectangular structural hollow sections and gives the dimensions and sectional properties for a range of standard sizes. For the technical delivery requirements see EN 10219-1.
EN 10219-2:1997 is classified under the following ICS (International Classification for Standards) categories: 77.140.75 - Steel pipes and tubes for specific use. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10219-2:1997 has the following relationships with other standards: It is inter standard links to EN 10219-2:2006, EN 40-2:2004, EN 1993-1-8:2005, EN 12063:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10219-2:1997 is associated with the following European legislation: Standardization Mandates: M/BC/CEN/89/10. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10219-2:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kaltgefertigte geschweißte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 2: Grenzabmaße, Maße und statische WerteProfils creux pour la construction formés a froid en aciers de construction non-alliés et a grains fins - Partie 2: Tolérances, dimensions et caractéristiques du profilCold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties77.140.70Jekleni profiliSteel profiles77.140.45Nelegirana jeklaNon-alloyed steelsICS:Ta slovenski standard je istoveten z:EN 10219-2:1997SIST EN 10219-2:1998en01-avgust-1998SIST EN 10219-2:1998SLOVENSKI
STANDARD
SIST EN 10219
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...