SIST EN ISO 3262-13:1998

SLOVENSKI STANDARD
SIST EN ISO 3262-13:1998
01-oktober-1998
1DGRPHãþD
SIST ISO 3262-13:1998
Polnila za barve - Specifikacije in metode preskušanja - 13. del: Naravni kremen
(mleti)
Extenders for paints - Specifications and methods of test - Part 13: Natural quartz
(ground) (ISO 3262-13:1997)
Füllstoffe für Beschichtungsstoffe - Anforderungen und Prüfverfahren - Teil 13:
Natürlicher Quartz (gemahlen) (ISO 3262-13:1997)
Matieres de charge pour peintures - Spécifications et méthodes d'essai - Partie 13:
Quartz naturel broyé (ISO 3262-13:1997)
Ta slovenski standard je istoveten z: EN ISO 3262-13:1998
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
SIST EN ISO 3262-13:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3262-13:1998

---------------------- Page: 2 ----------------------

SIST EN ISO 3262-13:1998

---------------------- Page: 3 ----------------------

SIST EN ISO 3262-13:1998

---------------------- Page: 4 ----------------------

SIST EN ISO 3262-13:1998

---------------------- Page: 5 ----------------------

SIST EN ISO 3262-13:1998

---------------------- Page: 6 ----------------------

SIST EN ISO 3262-13:1998
INTERNATIONAL IS0
STANDARD 3262-l 3
First edition
1997-06- 15
Extenders for paints - Specifications and
methods of test -
Part 13:
Natural quartz (ground)
Ma ti&es de charge pour peintures - Spkcifications et m&hodes d’essai -
Partie 13: Quat?z nature/ broy6
Reference number
IS0 3262-l 3:1997(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 3262-13:1998
IS0 3262=13:1997(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards bodies (IS0 member bodies). The work of preparing
International Standards is normally carried out through IS0 technical committees.
Each member body interested in a subject for which a technical committee has
been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take
part in the work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for voting. Publication as an International Standard requires
approval by at least 75 % of the member bodies casting a vote.
International Standard IS0 3262-13 was prepared by Technical Committee
ISO/TC 35, Paints and varnishes, Subcommittee SC 2, Pigments and extenders.
Together with the subsequent parts, this International Standard cancels and
replaces IS0 3262: 1975 which has been technically revised and divided into
parts. Part 1 comprises the definition for the term extender and a number of test
methods that are applicable to most extenders, whilst parts 2 and the following
specify requirements and, where appropriate, particular test methods for individual
extenders.
At present, the following parts of IS0 3262 are in preparation, under the general
title
Extenders for paints - Specifications and methods of test
- Part I: Introduction and general test methods
- Part 2: Baryte (natural barium sulfate)
0 IS0 1997
All rights reserved. Unless otherwise specified, no part of this publication may be
reproduced or utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Switzerland
Internet central@iso.ch
x.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 3262-13:1998
IS0 3262=13:1997(E)
@ IS0
- Part 3: Blanc fixe
- Part 4: Whiting
- Part 5: Natural crystalline calcium carbonate
- Part 6: Precipitated calcium carbonate
- Part 7: Dolomite
- Part 8: Natural clay
- Part 9: Calcined clay
- Part IO: Natural talc/chlorite in lamellar form
- Part 1 I: Natural talc, in lamellar form, containing carbonates
- Part 12: Muscovite-type mica
- Part 13: Natural quartz (ground)
- Part 14: Cristobalite
- Part 15: Vitreous silica
- Part 16: Aluminium hydroxides
- Part I 7: Precipitated calcium silicate
- Part 18: Precipitated sodium aluminium silicate
- Part 19: Precipitated silica
- Part 20: Fumed silica
- Part 2 I: Silica sand (unground natural quartz)
- Part 22: Diatomaceous earth (kieselguhr)

---------------------- Page: 9 ----------------------

SIST EN ISO 3262-13:1998
This page intentionally left blank

---------------------- Page: 10 ----------------------

SIST EN ISO 3262-13:1998
INTERNATIONAL STANDARD @ IS0 IS0 3262=13:1997(E)
Extenders for paints - Specifications and methods
of test -
Part 13:
Natural quartz (ground)
1 Scope
This part of IS0 3262 specifies the requirements and the corresponding methods
of test for natural quartz (ground).
2 Normative references
The following standards contain provisions which, through reference in this text,
constitute provisions of this part of IS0 3262. At the time of publication, the
editions indicated were valid. All standards are subject to revision, and parties to
agreements based on this part of IS0 3262 are encouraged to investigate the
possibility of applying the most recent editions of the standards indicated below.
Members of IEC and IS0 maintain registers of currently valid International
Standards.
IS
...