SIST EN 301 908-13 V7.1.1:2016

Final draft ETSI EN 301 908-13 V7.1.0 (2015-10)

HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised EN covering the essential requirements
of article 3.2 of the R&TTE Directive;
Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA)
User Equipment (UE)
2 Final draft ETSI EN 301 908-13 V7.1.0 (2015-10)

Reference
REN/MSG-TFES-011-13
Keywords
3G, 3GPP, cellular, digital, E-UTRA, IMT, LTE,
LTE-Advanced, mobile, radio, regulation, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Final draft ETSI EN 301 908-13 V7.1.0 (2015-10)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 8
1 Scope . 9
2 References . 11
2.1 Normative references . 11
2.2 Informative references . 12
3 Definitions, symbols and abbreviations . 13
3.1 Definitions . 13
3.2 Symbols . 15
3.3 Abbreviations . 17
4 Technical requirements specifications . 18
4.1 Environmental profile . 18
4.2 Conformance requirements . 18
4.2.1 Introduction. 18
4.2.2 Transmitter Maximum Output Power . 19
4.2.2.1 Transmitter maximum output power for Single Carrier . 19
4.2.2.1.1 Definition. 19
4.2.2.1.2 Limits . 19
4.2.2.1.3 Conformance . 19
4.2.2.2 Transmitter output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 19
4.2.2.2.1 Definition. 19
4.2.2.2.2 Limits . 20
4.2.2.2.3 Conformance . 20
4.2.2.3 Transmitter output power for UL-MIMO . 20
4.2.2.3.1 Definition. 20
4.2.2.3.2 Limits . 21
4.2.2.3.3 Conformance . 21
4.2.3 Transmitter Spectrum Emission Mask . 21
4.2.3.1 Transmitter spectrum emission mask for Single Carrier . 21
4.2.3.1.1 Definition. 21
4.2.3.1.2 Limits . 21
4.2.3.1.3 Conformance . 23
4.2.3.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 23
4.2.3.2.1 Definition. 23
4.2.3.2.2 Limits . 23
4.2.3.2.3 Conformance . 24
4.2.3.3 Transmitter spectrum emission mask for UL-MIMO . 24
4.2.3.3.1 Definition. 24
4.2.3.3.2 Limits . 24
4.2.3.3.3 Conformance . 24
4.2.3.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 24
4.2.3.4.1 Definition. 24
4.2.3.4.2 Limits . 24
4.2.3.4.3 Conformance . 25
4.2.4 Transmitter Spurious Emissions . 25
4.2.4.1 Transmitter spurious emissions for Single Carrier . 25
4.2.4.1.1 Definition. 25
4.2.4.1.2 Limits . 25
4.2.4.1.3 Conformance . 28
4.2.4.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL
CA) . 28
ETSI
4 Final draft ETSI EN 301 908-13 V7.1.0 (2015-10)
4.2.4.2.1 Definition. 28
4.2.4.2.2 Limits . 28
4.2.4.2.3 Conformance . 30
4.2.4.3 Transmitter spurious emissions for UL-MIMO . 30
4.2.4.3.1 Definition. 30
4.2.4.3.2 Limits . 31
4.2.4.3.3 Conformance . 31
4.2.4.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 31
4.2.4.4.1 Definition. 31
4.2.4.4.2 Limits . 31
4.2.4.4.3 Conformance . 31
4.2.5 Transmitter Minimum Output Power . 31
4.2.5.1 Transmitter minimum output power for Single Carrier. 31
4.2.5.1.1 Definition. 31
4.2.5.1.2 Limits . 31
4.2.5.1.3 Conformance . 31
4.2.5.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 32
4.2.5.2.1 Definition. 32
4.2.5.2.2 Limits . 32
4.2.5.2.3 Conformance . 32
4.2.5.3 Transmitter minimum output power for UL-MIMO . 32
4.2.5.3.1 Definition. 32
4.2.5.3.2 Limits . 32
4.2.5.3.3 Conformance . 32
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 33
4.2.6.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier . 33
4.2.6.1.1 Definition. 33
4.2.6.1.2 Limits . 33
4.2.6.1.3 Conformance . 33
4.2.6.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands . 34
4.2.6.2.1 Definition. 34
4.2.6.2.2 Limits . 34
4.2.6.2.3 Conformance . 34
4.2.7 Receiver Blocking Characteristics . 34
4.2.7.1 Receiver Blocking Characteristics for Single Carrier . 34
4.2.7.1.1 Definition. 34
4.2.7.1.2 Limits . 34
4.2.7.1.3 Conformance . 36
4.2.7.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 36
4.2.7.2.1 Definition. 36
4.2.7.2.2 Limits . 36
4.2.7.2.3 Conformance . 37
4.2.8 Receiver Spurious Response . 37
4.2.8.1 Receiver Spurious Response for Single Carrier . 37
4.2.8.1.1 Definition. 37
4.2.8.1.2 Limits . 37
4.2.8.1.3 Conformance . 38
4.2.8.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 38
4.2.8.2.1 Definition. 38
4.2.8.2.2 Limits . 38
4.2.8.2.3 Conformance . 38
4.2.9 Receiver Intermodulation Characteristics . 38
4.2.9.1 Receiver Intermodulation Characteristics for Single Carrier . 38
4.2.9.1.1 Definition. 38
4.2.9.1.2 Limits . 38
4.2.9.1.3 Conformance . 39
4.2.9.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands . 39
4.2.9.2.1 Definition. 39
4.2.9.2.2 Limits . 39
4.2.9.2.3 Conformance . 39
4.2.10 Receiver Spurious Emissions . 39
ETSI
5 Final draft ETSI EN 301 908-13 V7.1.0 (2015-10)
4.2.10.1 Receiver Spurious Emissions for Single Carrier . 39
4.2.10.1.1 Definition. 39
4.2.10.1.2 Limits . 39
4.2.10.1.3 Conformance . 40
4.2.10.2 Receiver Spurious Emissions in DL-only bands . 40
4.2.10.2.1 Definition. 40
4.2.10.2.2 Limits . 40
4.2.10.2.3 Conformance . 40
4.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 40
4.2.11.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 40
4.2.11.1.1 Definition. 40
4.2.11.1.2 Limits . 40
4.2.11.1.3 Conformance . 41
4.2.11.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation
(DL CA and UL CA). 41
4.2.11.2.1 Definition. 41
4.2.11.2.2 Limits . 42
4.2.11.2.3 Conformance . 42
4.2.11.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 43
4.2.11.3.1 Definition. 43
4.2.11.3.2 Limits . 43
4.2.11.3.3 Conformance . 44
4.2.11.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component
carrier . 44
4.2.11.4.1 Definition. 44
4.2.11.4.2 Limits . 44
4.2.11.4.3 Conformance . 44
5 Testing for compliance with technical requirements . 45
5.1 Environmental conditions for testing . 45
5.2 Interpretation of the measurement results . 45
5.3 Essential radio test suites . 46
5.3.1 Transmitter Maximum Output Power . 46
5.3.1.1 Transmitter maximum output power for Single Carrier . 46
5.3.1.1.1 Method of test . 46
5.3.1.1.2 Test requirements . 47
5.3.1.2 Transmitter maximum output power for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 47
5.3.1.2.1 Method of test . 47
5.3.1.2.2 Test requirements . 48
5.3.1.3 Transmitter maximum output power for UL-MIMO . 48
5.3.1.3.1 Method of test . 48
5.3.1.3.2 Test requirements . 48
5.3.2 Transmitter Spectrum Emission Mask . 49
5.3.2.1 Transmitter spectrum emission mask for Single Carrier . 49
5.3.2.1.1 Method of test . 49
5.3.2.1.2 Test requirements . 49
5.3.2.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 49
5.3.2.2.1 Method of test . 49
5.3.2.2.2 Test requirements . 50
5.3.2.3 Transmitter spectrum emission mask for UL-MIMO . 50
5.3.2.3.1 Method of test . 50
5.3.2.3.2 Test requirements . 51
5.3.2.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 51
5.3.2.4.1 Method of test . 51
5.3.2.4.2 Test requirements . 52
5.3.3 Transmitter Spurious Emissions . 52
5.3.3.1 Transmitter spurious emissions for Single Carrier . 52
5.3.3.1.1 Method of test . 52
5.3.3.1.2 Test requirements . 53
ETSI
6 Final draft ETSI EN 301 908-13 V7.1.0 (2015-10)
5.3.3.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL
CA) . 53
5.3.3.2.1 Method of test . 53
5.3.3.2.2 Test requirements . 54
5.3.3.3 Transmitter spurious emissions for UL-MIMO . 54
5.3.3.3.1 Method of test . 54
5.3.3.3.2 Test requirements . 54
5.3.3.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 55
5.3.3.4.1 Method of test . 55
5.3.3.4.2 Test requirements . 55
5.3.4 Transmitter Minimum Output Power . 55
5.3.4.1 Transmitter minimum output power for Single Carrier. 55
5.3.4.1.1 Method of test . 55
5.3.4.1.2 Test requirements . 56
5.3.4.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 56
5.3.4.2.1 Method of test . 56
5.3.4.2.2 Test requirements . 57
5.3.4.3 Transmitter minimum output power for UL-MIMO . 57
5.3.4.3.1 Method of test . 57
5.3.4.3.2 Test requirements . 58
5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 58
5.3.5.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier . 58
5.3.5.1.1 Method of test . 58
5.3.5.1.2 Test requirements . 59
5.3.5.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands . 59
5.3.5.2.1 Method of test . 59
5.3.5.2.2 Test requirements . 60
5.3.6 Receiver Blocking Characteristics . 60
5.3.6.1 Receiver Blocking Characteristics for Single Carrier . 60
5.3.6.1.1 Method of test . 60
5.3.6.1.2 Test requirements . 62
5.3.6.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 62
5.3.6.2.1 Method of test . 62
5.3.6.2.2 Test requirements . 64
5.3.7 Receiver Spurious Response . 64
5.3.7.1 Receiver Spurious Response for Single Carrier . 64
5.3.7.1.1 Method of test . 64
5.3.7.1.2 Test requirements . 65
5.3.7.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 65
5.3.7.2.1 Method of test . 65
5.3.7.2.2 Test requirements . 65
5.3.8 Receiver Intermodulation Characteristics . 66
5.3.8.1 Receiver Intermodulation Characteristics for Single Carrier . 66
5.3.8.1.1 Method of test . 66
5.3.8.1.2 Test requirements . 66
5.3.8.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands . 67
5.3.8.2.1 Method of test . 67
5.3.8.2.2 Test requirements . 67
5.3.9 Receiver Spurious Emissions . 68
5.3.9.1 Receiver Spurious Emissions for Single Carrier . 68
5.3.9.1.1 Method of test . 68
5.3.9.1.2 Test requirements . 68
5.3.9.2 Receiver Spurious Emissions in DL-only bands . 68
5.3.9.2.1 Method of test . 68
5.3.9.2.2 Test requirements . 69
5.3.10 Transmitter Adjacent Channel Leakage Power Ratio . 69
5.3.10.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 69
5.3.10.1.1 Method of test . 69
5.3.10.1.2 Test requirements . 70
5.3.10.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation
(DL CA and UL CA). 70
ETSI
7 Final draft ETSI EN 301 908-13 V7.1.0 (2015-10)
5.3.10.2.1 Method of test . 70
5.3.10.2.2 Test requirements . 71
5.3.10.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 71
5.3.10.3.1 Method of test . 71
5.3.10.3.2 Test requirements . 72
5.3.10.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component
carrier . 72
5.3.10.4.1 Method of test . 72
5.3.10.4.2 Test requirements . 73
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 74
Annex B (normative): Environmental profile . 76
B.1 General . 76
B.1.1 Introduction . 76
B.1.2 Temperature . 76
B.1.3 Voltage . 76
B.1.4 Test environment . 77
Annex C: Void . 78
Annex D (informative): Bibliography . 79
History . 80

ETSI
8 Final draft ETSI EN 301 908-13 V7.1.0 (2015-10)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile
Standards Group (MSG), and is now submitted for the Vote phase of the ETSI standards EN Approval Procedure.
The present document has been produced by ETSI in response to mandates M/284 and M/406 issued from the European
Commission under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.10].
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonised Standard under the Directive 1999/5/EC [i.2].
The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A.
The present document is part 13 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.13].

National transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommuni
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-13 V7.1.1SIST EN 301 908-13 V7.1.1:2016en01-marec-2016SIST EN 301 908-13 V7.1.1:2016SLOVENSKI
STANDARD
HARMONISED EUROPEAN STANDARD SIST EN 301 908-13 V7.1.1:2016

ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)2
Reference REN/MSG-TFES-011-13 Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, LTE, LTE-Advanced, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-13 V7.1.1:2016

ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)3 Contents Intellectual Property Rights . 8 Foreword . 8 Modal verbs terminology . 8 Introduction . 8 1 Scope . 9 2 References . 11 2.1 Normative references . 11 2.2 Informative references . 12 3 Definitions, symbols and abbreviations . 13 3.1 Definitions . 13 3.2 Symbols . 15 3.3 Abbreviations . 17 4 Technical requirements specifications . 18 4.1 Environmental profile . 18 4.2 Conformance requirements . 18 4.2.1 Introduction. 18 4.2.2 Transmitter Maximum Output Power . 19 4.2.2.1 Transmitter maximum output power for Single Carrier . 19 4.2.2.1.1 Definition. 19 4.2.2.1.2 Limits . 19 4.2.2.1.3 Conformance . 19 4.2.2.2 Transmitter output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 19 4.2.2.2.1 Definition. 19 4.2.2.2.2 Limits . 20 4.2.2.2.3 Conformance . 20 4.2.2.3 Transmitter output power for UL-MIMO . 20 4.2.2.3.1 Definition. 20 4.2.2.3.2 Limits . 21 4.2.2.3.3 Conformance . 21 4.2.3 Transmitter Spectrum Emission Mask . 21 4.2.3.1 Transmitter spectrum emission mask for Single Carrier . 21 4.2.3.1.1 Definition. 21 4.2.3.1.2 Limits . 21 4.2.3.1.3 Conformance . 23 4.2.3.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 23 4.2.3.2.1 Definition. 23 4.2.3.2.2 Limits . 23 4.2.3.2.3 Conformance . 24 4.2.3.3 Transmitter spectrum emission mask for UL-MIMO . 24 4.2.3.3.1 Definition. 24 4.2.3.3.2 Limits . 24 4.2.3.3.3 Conformance . 24 4.2.3.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 24 4.2.3.4.1 Definition. 24 4.2.3.4.2 Limits . 24 4.2.3.4.3 Conformance . 25 4.2.4 Transmitter Spurious Emissions . 25 4.2.4.1 Transmitter spurious emissions for Single Carrier . 25 4.2.4.1.1 Definition. 25 4.2.4.1.2 Limits . 25 4.2.4.1.3 Conformance . 28 4.2.4.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 28 SIST EN 301 908-13 V7.1.1:2016

ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)4 4.2.4.2.1 Definition. 28 4.2.4.2.2 Limits . 28 4.2.4.2.3 Conformance . 30 4.2.4.3 Transmitter spurious emissions for UL-MIMO . 30 4.2.4.3.1 Definition. 30 4.2.4.3.2 Limits . 31 4.2.4.3.3 Conformance . 31 4.2.4.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 31 4.2.4.4.1 Definition. 31 4.2.4.4.2 Limits . 31 4.2.4.4.3 Conformance . 31 4.2.5 Transmitter Minimum Output Power . 31 4.2.5.1 Transmitter minimum output power for Single Carrier. 31 4.2.5.1.1 Definition. 31 4.2.5.1.2 Limits . 31 4.2.5.1.3 Conformance . 31 4.2.5.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 32 4.2.5.2.1 Definition. 32 4.2.5.2.2 Limits . 32 4.2.5.2.3 Conformance . 32 4.2.5.3 Transmitter minimum output power for UL-MIMO . 32 4.2.5.3.1 Definition. 32 4.2.5.3.2 Limits . 32 4.2.5.3.3 Conformance . 32 4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 33 4.2.6.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier . 33 4.2.6.1.1 Definition. 33 4.2.6.1.2 Limits . 33 4.2.6.1.3 Conformance . 33 4.2.6.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands . 34 4.2.6.2.1 Definition. 34 4.2.6.2.2 Limits . 34 4.2.6.2.3 Conformance . 34 4.2.7 Receiver Blocking Characteristics . 34 4.2.7.1 Receiver Blocking Characteristics for Single Carrier . 34 4.2.7.1.1 Definition. 34 4.2.7.1.2 Limits . 34 4.2.7.1.3 Conformance . 36 4.2.7.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 36 4.2.7.2.1 Definition. 36 4.2.7.2.2 Limits . 36 4.2.7.2.3 Conformance . 37 4.2.8 Receiver Spurious Response . 37 4.2.8.1 Receiver Spurious Response for Single Carrier . 37 4.2.8.1.1 Definition. 37 4.2.8.1.2 Limits . 37 4.2.8.1.3 Conformance . 38 4.2.8.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 38 4.2.8.2.1 Definition. 38 4.2.8.2.2 Limits . 38 4.2.8.2.3 Conformance . 38 4.2.9 Receiver Intermodulation Characteristics . 38 4.2.9.1 Receiver Intermodulation Characteristics for Single Carrier . 38 4.2.9.1.1 Definition. 38 4.2.9.1.2 Limits . 38 4.2.9.1.3 Conformance . 39 4.2.9.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands . 39 4.2.9.2.1 Definition. 39 4.2.9.2.2 Limits . 39 4.2.9.2.3 Conformance . 39 4.2.10 Receiver Spurious Emissions . 39 SIST EN 301 908-13 V7.1.1:2016

ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)5 4.2.10.1 Receiver Spurious Emissions for Single Carrier . 39 4.2.10.1.1 Definition. 39 4.2.10.1.2 Limits . 39 4.2.10.1.3 Conformance . 40 4.2.10.2 Receiver Spurious Emissions in DL-only bands . 40 4.2.10.2.1 Definition. 40 4.2.10.2.2 Limits . 40 4.2.10.2.3 Conformance . 40 4.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 40 4.2.11.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 40 4.2.11.1.1 Definition. 40 4.2.11.1.2 Limits . 40 4.2.11.1.3 Conformance . 41 4.2.11.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 41 4.2.11.2.1 Definition. 41 4.2.11.2.2 Limits . 42 4.2.11.2.3 Conformance . 42 4.2.11.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 43 4.2.11.3.1 Definition. 43 4.2.11.3.2 Limits . 43 4.2.11.3.3 Conformance . 44 4.2.11.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component carrier . 44 4.2.11.4.1 Definition. 44 4.2.11.4.2 Limits . 44 4.2.11.4.3 Conformance . 44 5 Testing for compliance with technical requirements . 45 5.1 Environmental conditions for testing . 45 5.2 Interpretation of the measurement results . 45 5.3 Essential radio test suites . 46 5.3.1 Transmitter Maximum Output Power . 46 5.3.1.1 Transmitter maximum output power for Single Carrier . 46 5.3.1.1.1 Method of test . 46 5.3.1.1.2 Test requirements . 47 5.3.1.2 Transmitter maximum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 47 5.3.1.2.1 Method of test . 47 5.3.1.2.2 Test requirements . 48 5.3.1.3 Transmitter maximum output power for UL-MIMO . 48 5.3.1.3.1 Method of test . 48 5.3.1.3.2 Test requirements . 48 5.3.2 Transmitter Spectrum Emission Mask . 49 5.3.2.1 Transmitter spectrum emission mask for Single Carrier . 49 5.3.2.1.1 Method of test . 49 5.3.2.1.2 Test requirements . 49 5.3.2.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 49 5.3.2.2.1 Method of test . 49 5.3.2.2.2 Test requirements . 50 5.3.2.3 Transmitter spectrum emission mask for UL-MIMO . 50 5.3.2.3.1 Method of test . 50 5.3.2.3.2 Test requirements . 51 5.3.2.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 51 5.3.2.4.1 Method of test . 51 5.3.2.4.2 Test requirements . 52 5.3.3 Transmitter Spurious Emissions . 52 5.3.3.1 Transmitter spurious emissions for Single Carrier . 52 5.3.3.1.1 Method of test . 52 5.3.3.1.2 Test requirements . 53 SIST EN 301 908-13 V7.1.1:2016

ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)6 5.3.3.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 53 5.3.3.2.1 Method of test . 53 5.3.3.2.2 Test requirements . 54 5.3.3.3 Transmitter spurious emissions for UL-MIMO . 54 5.3.3.3.1 Method of test . 54 5.3.3.3.2 Test requirements . 54 5.3.3.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 55 5.3.3.4.1 Method of test . 55 5.3.3.4.2 Test requirements . 55 5.3.4 Transmitter Minimum Output Power . 55 5.3.4.1 Transmitter minimum output power for Single Carrier. 55 5.3.4.1.1 Method of test . 55 5.3.4.1.2 Test requirements . 56 5.3.4.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 56 5.3.4.2.1 Method of test . 56 5.3.4.2.2 Test requirements . 57 5.3.4.3 Transmitter minimum output power for UL-MIMO . 57 5.3.4.3.1 Method of test . 57 5.3.4.3.2 Test requirements . 58 5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 58 5.3.5.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier . 58 5.3.5.1.1 Method of test . 58 5.3.5.1.2 Test requirements . 59 5.3.5.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands . 59 5.3.5.2.1 Method of test . 59 5.3.5.2.2 Test requirements . 60 5.3.6 Receiver Blocking Characteristics . 60 5.3.6.1 Receiver Blocking Characteristics for Single Carrier . 60 5.3.6.1.1 Method of test . 60 5.3.6.1.2 Test requirements . 62 5.3.6.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 62 5.3.6.2.1 Method of test . 62 5.3.6.2.2 Test requirements . 64 5.3.7 Receiver Spurious Response . 64 5.3.7.1 Receiver Spurious Response for Single Carrier . 64 5.3.7.1.1 Method of test . 64 5.3.7.1.2 Test requirements . 65 5.3.7.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 65 5.3.7.2.1 Method of test . 65 5.3.7.2.2 Test requirements . 65 5.3.8 Receiver Intermodulation Characteristics . 66 5.3.8.1 Receiver Intermodulation Characteristics for Single Carrier . 66 5.3.8.1.1 Method of test . 66 5.3.8.1.2 Test requirements . 66 5.3.8.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands . 67 5.3.8.2.1 Method of test . 67 5.3.8.2.2 Test requirements . 67 5.3.9 Receiver Spurious Emissions . 68 5.3.9.1 Receiver Spurious Emissions for Single Carrier . 68 5.3.9.1.1 Method of test . 68 5.3.9.1.2 Test requirements . 68 5.3.9.2 Receiver Spurious Emissions in DL-only bands . 68 5.3.9.2.1 Method of test . 68 5.3.9.2.2 Test requirements . 69 5.3.10 Transmitter Adjacent Channel Leakage Power Ratio . 69 5.3.10.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 69 5.3.10.1.1 Method of test . 69 5.3.10.1.2 Test requirements . 70 5.3.10.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 70 SIST EN 301 908-13 V7.1.1:2016

ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)7 5.3.10.2.1 Method of test . 70 5.3.10.2.2 Test requirements . 71 5.3.10.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 71 5.3.10.3.1 Method of test . 71 5.3.10.3.2 Test requirements . 72 5.3.10.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component carrier . 72 5.3.10.4.1 Method of test . 72 5.3.10.4.2 Test requirements . 73 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 74 Annex B (normative): Environmental profile . 76 B.1 General . 76 B.1.1 Introduction . 76 B.1.2 Temperature . 76 B.1.3 Voltage . 76 B.1.4 Test environment . 77 Annex C: Void . 78 Annex D (informative): Bibliography . 79 History . 80
ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)8 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been produced by ETSI in response to mandates M/284 and M/406 issued from the European Commission under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.10]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonised Standard under the Directive 1999/5/EC [i.2]. The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A. The present document is part 13 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.13].
National transposition dates Date of adoption of this EN: 14 December 2015 Date of latest announcement of this EN (doa): 31 March 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 September 2016 Date of withdrawal of any conflicting National Standard (dow): 30 September 2017
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The modular struc
...