Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)

This part of ISO 11680 specifies safety requirements and their verification for the design and construction of portable hand-held pole-mounted powered pruners with a back-pack power unit, using a drive shaft, to transmit power to the cutting attachment. The cutting attachments covered are saw chains, reciprocating and circular saw blades. This part of ISO 11680 describes methods for the elimination or reduction of hazards arising from their use. In addition it specifies the type of information on safe working practices to be provided by the manufacturer. It deals with all significant hazards except for electric shock hazard from contact with overhead electric lines, apart from warnings and advice for instruction handbook contents andvibration hazard from the back-pack power unit Environmental aspects, except for noise, have not been considered in this standard.

Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfung für motorbetriebene Hochentaster - Teil 2: Geräte mit rückentragbarer Antriebseinheit (ISO 11680-2:2011)

Dieser Teil der ISO 11680 enthält sicherheitstechnische Anforderungen und die Feststellung deren Übereinstimmung, für die Gestaltung und Konstruktion von Hand gehaltenen Hochentastern mit einer rückentragbaren Antriebseinheit mit Antriebswelle zur Übertragung der Energie auf die Schneidgarnitur. Die behandelten Schneidgarnituren sind Sägeketten, sich hin und her bewegende Sägeblätter und Kreissäge-blätter.
Diese Norm beschreibt Verfahren für die Beseitigung oder Verringerung von Gefährdungen, die durch ihren Einsatz entstehen. Außerdem legt sie die Art der Informationen für sichere Arbeitsweisen fest, die vom Hersteller zur Verfügung zu stellen sind.
Dieses Dokument behandelt, mit Ausnahme der nachfolgend aufgeführten, alle signifikanten Gefährdungen, Gefährdungssituationen oder Gefährdungsereignisse für diese Maschinen, sofern sie unter dem vorgege-benen Zweck und bei vernünftigerweise vorhersehbarem Missbrauch eingesetzt werden.
Nicht behandelte signifikante Gefährdungen sind:
-   Gefährdung durch elektrischen Schlag durch Kontakt mit oberirdischen elektrischen Leitungen, mit Ausnahme von Warnhinweisen und Empfehlungen zur Aufnahme in die Gebrauchsanleitung;
-   Gefährdung durch Ganzkörperschwingungen, die von der rückentragbaren Antriebseinheit ausgehen.
ANMERKUNG   Eine Methode zur Messung der Ganzkörperschwingungen, die von der rückentragbaren Antriebseinheit ausgehen, ist derzeit nicht verfügbar. Siehe Anhang A zur Liste der signifikanten Gefährdungen.
Dieser Teil der ISO 11680 gilt in erster Linie für tragbare handgehaltene Hochentaster, die nach dem Ausgabedatum der Norm hergestellt worden sind.

Matériel forestier - Exigences de sécurité et essais pour les perches élagueuses à moteur - Partie 2: Machines avec source motrice portée à dos (ISO 11680-2:2011)

L'ISO 11680-2:2011 spécifie les exigences de sécurité, et les mesures pour leur vérification, pour la conception et la construction des perches élagueuses portatives à moteur, tenues à la main, équipées d'une source motrice portée à dos et fonctionnant avec un arbre de transmission pour alimenter le dispositif de coupe consistant en une chaîne de scie, lame alternative ou lame de scie circulaire. Elle spécifie également des méthodes pour éliminer ou réduire les phénomènes dangereux inhérents à l'utilisation de ces machines, ainsi que le type d'informations sur les pratiques d'utilisation sûres à fournir par le fabricant.
L'ISO 11680-2:2011, conjointement avec les sections pertinentes de l'ISO 11680-1, traite de tous les phénomènes dangereux significatifs, situations dangereuses et événements dangereux, à l'exception du choc électrique engendré par un contact avec des lignes électriques aériennes (en dehors des avertissements et conseils à inclure dans la notice d'instructions) et des vibrations transmises à l'ensemble du corps par la source motrice portée à dos, pertinents pour ces machines lorsqu'elles sont utilisées normalement et dans des conditions de mauvais usage raisonnablement prévisibles par le fabricant.

Gozdarski stroji - Zahteve za varnost in preskušanje motornih žag za obvejevanje z drogom - 2. del: Stroji z ločenim ali nahrbtnim motornim pogonom (ISO 11680-2:2011)

Ta del standarda ISO 11680 določa varnostne zahteve in ukrepe za njihovo preverjanje za zasnovo in konstrukcijo prenosnih, ročnih motornih žag za obvejevanje z drogom z nahrbtnim pogonom, ki uporabljajo pogonsko gred za prenos moči do nastavka za rezanje, ki ga sestavlja veriga žage ali premočrtno ali krožno rezilo žage (v nadaljevanju: »stroj«). Predpisane so metode za odpravljanje ali zmanjšanje tveganj, ki izhajajo iz uporabe teh strojev, in vrsta informacij o varnih delovnih praksah, ki jih mora zagotoviti proizvajalec. Ta del standarda ISO 11680 poleg ustreznih oddelkov standarda ISO 11680-1 opisuje vsa večja tveganja, nevarne situacije ali nevarne dogodke v zvezi s temi stroji, razen električnega udara zaradi stika z nadzemnimi električnimi kabli (vsebuje le opozorila in nasvete, ki morajo biti vključeni v priročnik z navodili) in vibriranja celotnega telesa zaradi nahrbtnega motornega pogona, kadar se uporabljajo v skladu z njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec. Ta del standarda ISO 11680 se uporablja za prenosne, ročne motorne žage za obvejevanje z drogom z nahrbtnim pogonom, izdelane po datumu njegove izdaje.

General Information

Status
Withdrawn
Public Enquiry End Date
24-Mar-2010
Publication Date
11-Jan-2012
Withdrawal Date
01-Dec-2021
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
02-Dec-2021
Due Date
25-Dec-2021
Completion Date
02-Dec-2021

Relations

Buy Standard

Standard
EN ISO 11680-2:2012
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11680-2:2012
01-marec-2012
1DGRPHãþD
SIST EN ISO 11680-2:2001
SIST EN ISO 11680-2:2001/AC:2004
SIST EN ISO 11680-2:2009
*R]GDUVNLVWURML=DKWHYH]DYDUQRVWLQSUHVNXãDQMHPRWRUQLKåDJ]DREYHMHYDQMH]
GURJRPGHO6WURML]ORþHQLPDOLQDKUEWQLPPRWRUQLPSRJRQRP ,62

Machinery for forestry - Safety requirements and testing for pole-mounted powered
pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)
Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfung für motorbetriebene
Hochentaster - Teil 2: Geräte mit rückentragbarer Antriebseinheit (ISO 11680-2:2011)
Matériel forestier - Exigences de sécurité et essais pour les perches élagueuses à
moteur - Partie 2: Machines avec source motrice portée à dos (ISO 11680-2:2011)
Ta slovenski standard je istoveten z: EN ISO 11680-2:2011
ICS:
65.060.80 Gozdarska oprema Forestry equipment
SIST EN ISO 11680-2:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11680-2:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 11680-2:2012


EUROPEAN STANDARD
EN ISO 11680-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2011
ICS 65.060.80 Supersedes EN ISO 11680-2:2000
English Version
Machinery for forestry - Safety requirements and testing for pole-
mounted powered pruners - Part 2: Machines for use with back-
pack power source (ISO 11680-2:2011)
Matériel forestier - Exigences de sécurité et essais pour les Forstmaschinen - Sicherheitstechnische Anforderungen
perches élagueuses à moteur - Partie 2: Machines avec und Prüfung für motorbetriebene Hochentaster - Teil 2:
source motrice portée à dos (ISO 11680-2:2011) Geräte mit rückentragbarer Antriebseinheit (ISO 11680-
2:2011)
This European Standard was approved by CEN on 30 November 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11680-2:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11680-2:2012
EN ISO 11680-2:2011 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11680-2:2012
EN ISO 11680-2:2011 (E)
Foreword
This document (EN ISO 11680-2:2011) has been prepared by Technical Committee ISO/TC 23 "Tractors and
machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at
the latest by June 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11680-2:2000.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11680-2:2011 has been approved by CEN as a EN ISO 11680-2:2011 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 11680-2:2012
EN ISO 11680-2:2011 (E)
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2006/42/EC on machinery.

Once this standard is cited in the Official Journal of the European Union under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements of that Directive and associated EFTA regulations.

WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.

4

---------------------- Page: 6 ----------------------

SIST EN ISO 11680-2:2012
INTERNATIONAL  ISO
STANDARD 11680‑2
Second edition
2011-12-01
Machinery for forestry — Safety
requirements and testing for
pole‑mounted powered pruners —
Part 2:
Machines for use with back‑pack power
source
Matériel forestier — Exigences de sécurité et essais pour les perches
élagueuses à moteur —
Partie 2: Machines pour utilisation avec source motrice portée à dos
Reference number
ISO 11680-2:2011(E)
©
 ISO 2011

---------------------- Page: 7 ----------------------

SIST EN ISO 11680-2:2012
ISO 11680‑2:2011(E)
COPYRIGHT PROTECTED DOCUMENT
©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 11680-2:2012
ISO 11680‑2:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11680-2 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and
forestry, Subcommittee SC 17, Manually portable forest machinery
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.