SIST EN 301 908-12 V3.1.1:2008
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 12: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 12: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive
EN 301 908 does already cover requirements on repeaters for IMT-2000: within 3GPP2 requirements on repeaters for cdma2000 were initially part of the minimum performance specifications of base stations. Therefore, such requirements were also included into part 5 of EN 301 908 on cdma2000 base stations. As the requirements on repeaters for cdma2000 have been refined and expanded significantly in 3GPP2, a separate minimum performance specification has been created for cdma2000 repeaters in 3GPP2 and will be adopted by TIA. It is suggested that a separate part 12 for cdma2000 repeaters shall be created for EN 301 908. This was already approved together with the WI on IMT-2000 repeaters that was approved in December 2002. However, due to mismatch in anticipated time schedules part 12 has not been created yet.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS), ponavljalniki (repetitorji) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 12. del: Harmonizirani EN za IMT-2000, CDMA “Multi-Carrier” (CDMA2000) (ponavljalniki (repetitorji)), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Buy Standard
Standards Content (Sample)
ETSI EN 301 908-12 V3.1.1 (2008-04)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 12: Harmonized EN for IMT-2000,
CDMA Multi-Carrier (cdma2000) (Repeaters)
covering essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 ETSI EN 301 908-12 V3.1.1 (2008-04)
Reference
DEN/ERM-TFES-002-12
Keywords
3G, 3GPP, digital, IMT-2000, regulation,
repeater, testing, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2007.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 908-12 V3.1.1 (2008-04)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .6
1 Scope.7
2 References.7
3 Definitions, symbols and abbreviations .8
3.1 Definitions.8
3.2 Symbols.10
3.3 Abbreviations.10
4 Technical requirements specifications .11
4.1 Environmental profile.11
4.2 Conformance requirements.11
4.2.1 Introduction.11
4.2.2 Spectrum emissions mask.11
4.2.2.1 Definition.11
4.2.2.2 Limits.12
4.2.2.3 Conformance.12
4.2.3 Spurious emissions.13
4.2.3.1 Definition.13
4.2.3.2 Limits.13
4.2.3.2.1 Spurious emissions.13
4.2.3.3 Conformance.15
4.2.4 Maximum output power.15
4.2.4.1 Definition.15
4.2.4.2 Limits.15
4.2.4.3 Conformance.15
4.2.5 Input intermodulation.16
4.2.5.1 Definition.16
4.2.5.2 Limits.16
4.2.5.3 Conformance.16
4.2.6 Out-of-band gain.17
4.2.6.1 Definition.17
4.2.6.2 Limits.17
4.2.6.3 Conformance.17
4.2.7 Output intermodulation.18
4.2.7.1 Definition.18
4.2.7.2 Limits.18
4.2.7.3 Conformance.18
5 Testing for compliance with technical requirements.18
5.1 Conditions for testing .18
5.1.1 Introduction.18
5.1.2 Standard equipment under test.18
5.2 Interpretation of the measurement results .18
5.3 Essential radio test suites.19
5.3.1 Spectrum emission mask.19
5.3.1.1 Initial conditions .19
5.3.1.2 Procedures.19
5.3.2 Spurious emissions.19
5.3.2.1 Initial conditions .19
5.3.2.2 Procedure.20
5.3.3 Maximum output power.20
5.3.3.1 Initial conditions .20
5.3.3.2 Procedure.20
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 908-12 V3.1.1 (2008-04)
5.3.4 Input intermodulation.20
5.3.4.1 Initial conditions .20
5.3.4.2 Procedures.20
5.3.5 Out-of-band gain.21
5.3.5.1 Initial conditions .21
5.3.5.2 Procedure.21
5.3.6 Output intermodulation.22
5.3.6.1 Initial conditions .22
5.3.6.2 Procedure.22
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).24
Annex B (normative): Repeater configurations .26
B.1 Power supply.26
B.2 Power supply options .26
B.3 Ancillary equipment.26
Annex C (informative): Environmental profile specification .27
Annex D (informative): Bibliography.28
Annex E (informative): The EN title in the official languages .29
History .31
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 908-12 V3.1.1 (2008-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The present document is part 12 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 10: "Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive".
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 301 908-12 V3.1.1 (2008-04)
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 24 August 2007
Date of latest announcement of this EN (doa): 31 May 2008
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 November 2008
Date of withdrawal of any conflicting National Standard (dow): 30 November 2009
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399.
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 301 908-12 V3.1.1 (2008-04)
1 Scope
The present document applies to the following radio equipment types:
• Repeaters for IMT-2000 CDMA multi-carrier (cdma2000).
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1.
Table 1: CDMA multi-carrier Repeater service frequency bands
Direction of transmission CDMA multi-carrier Repeater service Band Class (BC)
frequency bands
Forward link (DL) 2 110 MHz to 2 170 MHz
6
Reverse link (UL) 1 920 MHz to 1 980 MHz
Forward link (DL) 1 805 MHz to 1 880 MHz
8
Reverse link (UL) 1 710 MHz to 1 785 MHz
Forward link (DL) 925 MHz to 960 MHz
9
Reverse link (UL) 880 MHz to 915 MHz
Forward link (DL) 2 620 MHz to 2 690 MHz
13
Reverse link (UL) 2 500 MHz to 2 570 MHz
Repeaters for IMT-2000 CDMA multi-carrier (cdma2000) may support:
1) operation in cdma2000 spread spectrum systems as defined in TIA-2000.2 [5], referred to herein as operation
in Type 1 cdma2000 systems; or
2) operation in cdma2000 High Rate Packet Data Systems as defined in TIA-856 [11], referred to herein in
Type 2 cdma2000 systems.
The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2,
which states that "[…] radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org/.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 301 908-12 V3.1.1 (2008-04)
[2] Void.
[3] Void.
[4] ANSI/TIA-97-F-1 (June 2006): "Recommended Minimum Performance Standard for cdma2000
Spread Spectrum Base Stations - Addendum 1".
[5] TIA-2000.2-D-1 (January 2006): "Physical Layer Standard for cdma2000 Spread Spectrum
Systems - Addendum 1".
[6] Void.
[7] Void.
[8] Void.
[9] Void.
[10] Void.
[11] TIA-856-A-1[E] (February 2007): "cdma2000 High Rate Packet Data Air Interface Specification -
Addendum 1".
[12] TIA-864-A (January 2006): "Recommended Minimum Performance Standards for cdma2000 High
Rate Packet Data Access Network Equipment".
[13] Void.
[14] TIA-1037 (2007): "Recommended Minimum Performance Standard for cdma2000 Spread
Spectrum Repeater".
[15] TIA-1030-B (December 2006): "Band Class Specification for cdma2000 Spread Spectrum
Systems".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following
apply:
Band Class (BC): set of frequency channels and a numbering scheme for these channels
Base Station (BS): fixed station used for communicating with mobile stations
NOTE 1: Base stations for IMT-2000 CDMA multi-carrier (cdma2000) may support, operation in cdma2000 spread
spectrum systems as defined in TIA-2000.2 [5], referred to herein as operation in Type 1 cdma2000
system, or operation in cdma2000 High Rate Packet Data Systems as defined in TIA-856 [11], referred to
herein as operation in Type 2 cdma2000 systems.
NOTE 2: Depending upon the context, the term base station may refer to a cell, a sector within a cell, an MSC, and
access network or other part of the wireless system. See also MSC.
CDMA channel: set of channels transmitted from the base station and the mobile stations on a given frequency
CDMA channel number: 11-bit number corresponding to the centre of the CDMA frequency assignment
CDMA frequency assignment: 1,23 MHz segment of spectrum
NOTE: For band classes 6, 8, and 9, the channel is centred on one of the 50 kHz channels.
chip rate: rate of "chips" (modulated symbols after spreading) per second
ETSI
---------------------- Page: 8 ----------------------
9 ETSI EN 301 908-12 V3.1.1 (2008-04)
Code Division Multiple Access (CDMA): technique for spread-spectrum multiple-access digital communications that
creates channels through the use of unique code sequences
donor coupling loss: coupling loss between the Repeater and the donor base station
Down Link (DL): signal path where base station or Repeater transmits and the mobile receives
NOTE: Also referred to as the forward link.
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
forward CDMA channel: CDMA channel from a base station or Repeater to mobile stations
NOTE: The forward CDMA channel contains one or more code channels that are transmitted on a CDMA
frequency assignment using a particular pilot PN offset.
High Rate Packet Data (HRPD): CDMA technique optimized for data communications in Type 2 cdma2000 systems
maximum output power (Pmax): mean power level per carrier measured at the antenna connector of the Repeater in
specified reference condition
mean power: total calorimetric power measured in a specified bandwidth at the antenna connector.
mobile station: station intended to be used while in motion or during halts at unspecified points
NOTE: Mobile stations include portable units (e.g. hand-held personal units) and units installed in vehicles and
HRPD access terminals.
pass band: frequency range that the Repeater operates in with operational configuration
NOTE 1: This frequency range can correspond to one or several consecutive nominal 5 MHz channels. If they are
not consecutive each subset of channels is considered as an individual pass band.
NOTE 2: The Repeater can have one or several pass bands.
radio configuration: set of forward traffic channel and reverse traffic channel transmission formats that are
characterized by physical layer parameters such as transmission rates, modulation characteristics, and spreading rate
NOTE: Radio configurations are defined in TIA-2000.2 [5], clauses 2.1.3 and 3.1.3.
Resolution Band Width (RBW): measured in Hz and represents the frequency over which power is integrated in a
spectrum analyser to display the amplitude at the centre of the integration frequency range
repeater: device that receives, amplifies and transmits the radiated or conducted RF carrier both in the down-link
direction (from the base station to the mobile area) and in the up-link direction (from the mobile to the base station)
NOTE: A repeater can be a device that receives, amplifies and transmits one ore more radiated or conducted
CDMA channel(s) both in the down-link direction (from the base station to the mobile area) and in the
up-link direction (from the mobile to the base station).
reverse CDMA channel: CDMA channel from the mobile station to the base station
NOTE: From the base station's perspective, the reverse CDMA channel is the sum of all mobile station
transmissions on a CDMA frequency assignment.
RF carrier: direct-sequence spread RF channel
NOTE: For the forward CDMA channel, the number of RF carriers is 1 for spreading rate 1 and 3 for spreading
rate 3; for the reverse CDMA channel, there is one RF carrier.
spreading rate: PN chip rate of the forward CDMA channel or the reverse CDMA channel, defined as a multiple of
1,2288 Mcps
ETSI
---------------------- Page: 9 ----------------------
10 ETSI EN 301 908-12 V3.1.1 (2008-04)
spreading rate 1: spreading rate 1 is often referred to as "1X"
NOTE 1: A spreading rate 1 forward CDMA channel uses a single direct-sequence spread carrier with a chip rate
of 1,2288 Mcps.
NOTE 2: A spreading rate 1 reverse CDMA channel uses a single direct-sequence spread carrier with a chip rate of
1,2288 Mcps.
spreading rate 3: spreading rate 3 is often referred to as "3X"
NOTE 1: A spreading rate 3 forward CDMA channel uses three direct-sequence spread carriers (see multiple-
carrier forward channel) each with a chip rate of 1,2288 Mcps.
NOTE 2: A spreading rate 3 reverse CDMA channel uses a single direct-sequence spread carrier with a chip rate of
3,6864 Mcps.
Up Link (UL): signal path where the mobile or Repeater transmits and the base station receives
NOTE: Also referred to as the reverse link.
User Equipment (UE): mobile station supporting operation in cdma2000 spread spectrum systems
NOTE: See TIA-2000.2 [5], referred to herein as operation in Type 1 cdma2000 system; access terminal
supporting operation in cdma2000 High Rate Packet Data Systems as defined in
TIA-856 [11], referred to herein as operation in Type 2 cdma2000 system; and mobile station supporting
operation in Type 1 and Type 2 cdma2000 systems.
3.2 Symbols
For the purposes of the present document, the following symbols apply:
dBc ratio (in dB) of the sideband power of a signal, measured in a given bandwidth at a given
frequency offset from the centre frequency of the same signal, to the total inband power of the
signal. For CDMA, the total inband power of the signal is measured in a 1,23 MHz bandwidth
around the centre frequency of the CDMA signal for a spreading rate 1 CDMA signal and in
3,69 MHz bandwidth around the centre frequency of the CDMA signal for a spreading rate 3
CDMA signal.
dBm measure of power expressed in terms of its ratio (in dB) to 1 mW
dBm/Hz measure of power spectral density. The ratio, dBm/Hz, is the power in 1 Hz of bandwidth, where
power is expressed in units of dBm
9
GHz GigaHertz (10 Hertz)
3
kHz kiloHertz (10 Hertz)
6
MHz MegaHertz (10 Hertz)
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
BC Band Class
BS Base Station
CDMA Code Division Multiple Access
CW Continuous Wave (unmodulated signal)
DCS Digital Cellular System
DL Downlink
EMC ElectroMagnetic Compatibility
GSM Global System for Mobile Communications
HRPD High Rate Packet Data
IMT International Mobile Telecommunications
MSC Mobile Switching Centre
PN PseudoNoise
R&TTE Radio and Telecommunications Terminal Equipment
RBW Resolution BandWidth
ETSI
---------------------- Page: 10 ----------------------
11 ETSI EN 301 908-12 V3.1.1 (2008-04)
RF Radio Frequency
TDD Time Division Duplex
UE User Equipment
UL Uplink
UTRA Universal Terrestrial Radio Access
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be declared by the
...
SLOVENSKI STANDARD
SIST EN 301 908-12 V3.1.1:2008
01-oktober-2008
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50 %D]QH
SRVWDMH %6 SRQDYOMDOQLNL UHSHWLWRUML LQXSRUDEQLãNDRSUHPD 8( ]DFHOLþQD
RPUHåMDWUHWMHJHQHUDFLMH,07GHO +DUPRQL]LUDQL(1]D,07&'0$
³0XOWL&DUULHU´ &'0$ SRQDYOMDOQLNL UHSHWLWRUML NL]DMHPDELVWYHQH]DKWHYH
þOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS),
Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks -
Part 12: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters)
covering essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 908-12 Version 3.1.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 908-12 V3.1.1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 908-12 V3.1.1:2008
---------------------- Page: 2 ----------------------
SIST EN 301 908-12 V3.1.1:2008
ETSI EN 301 908-12 V3.1.1 (2008-04)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 12: Harmonized EN for IMT-2000,
CDMA Multi-Carrier (cdma2000) (Repeaters)
covering essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 3 ----------------------
SIST EN 301 908-12 V3.1.1:2008
2 ETSI EN 301 908-12 V3.1.1 (2008-04)
Reference
DEN/ERM-TFES-002-12
Keywords
3G, 3GPP, digital, IMT-2000, regulation,
repeater, testing, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2007.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 908-12 V3.1.1:2008
3 ETSI EN 301 908-12 V3.1.1 (2008-04)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .6
1 Scope.7
2 References.7
3 Definitions, symbols and abbreviations .8
3.1 Definitions.8
3.2 Symbols.10
3.3 Abbreviations.10
4 Technical requirements specifications .11
4.1 Environmental profile.11
4.2 Conformance requirements.11
4.2.1 Introduction.11
4.2.2 Spectrum emissions mask.11
4.2.2.1 Definition.11
4.2.2.2 Limits.12
4.2.2.3 Conformance.12
4.2.3 Spurious emissions.13
4.2.3.1 Definition.13
4.2.3.2 Limits.13
4.2.3.2.1 Spurious emissions.13
4.2.3.3 Conformance.15
4.2.4 Maximum output power.15
4.2.4.1 Definition.15
4.2.4.2 Limits.15
4.2.4.3 Conformance.15
4.2.5 Input intermodulation.16
4.2.5.1 Definition.16
4.2.5.2 Limits.16
4.2.5.3 Conformance.16
4.2.6 Out-of-band gain.17
4.2.6.1 Definition.17
4.2.6.2 Limits.17
4.2.6.3 Conformance.17
4.2.7 Output intermodulation.18
4.2.7.1 Definition.18
4.2.7.2 Limits.18
4.2.7.3 Conformance.18
5 Testing for compliance with technical requirements.18
5.1 Conditions for testing .18
5.1.1 Introduction.18
5.1.2 Standard equipment under test.18
5.2 Interpretation of the measurement results .18
5.3 Essential radio test suites.19
5.3.1 Spectrum emission mask.19
5.3.1.1 Initial conditions .19
5.3.1.2 Procedures.19
5.3.2 Spurious emissions.19
5.3.2.1 Initial conditions .19
5.3.2.2 Procedure.20
5.3.3 Maximum output power.20
5.3.3.1 Initial conditions .20
5.3.3.2 Procedure.20
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 908-12 V3.1.1:2008
4 ETSI EN 301 908-12 V3.1.1 (2008-04)
5.3.4 Input intermodulation.20
5.3.4.1 Initial conditions .20
5.3.4.2 Procedures.20
5.3.5 Out-of-band gain.21
5.3.5.1 Initial conditions .21
5.3.5.2 Procedure.21
5.3.6 Output intermodulation.22
5.3.6.1 Initial conditions .22
5.3.6.2 Procedure.22
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).24
Annex B (normative): Repeater configurations .26
B.1 Power supply.26
B.2 Power supply options .26
B.3 Ancillary equipment.26
Annex C (informative): Environmental profile specification .27
Annex D (informative): Bibliography.28
Annex E (informative): The EN title in the official languages .29
History .31
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 908-12 V3.1.1:2008
5 ETSI EN 301 908-12 V3.1.1 (2008-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The present document is part 12 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 10: "Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive".
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 908-12 V3.1.1:2008
6 ETSI EN 301 908-12 V3.1.1 (2008-04)
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 24 August 2007
Date of latest announcement of this EN (doa): 31 May 2008
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 November 2008
Date of withdrawal of any conflicting National Standard (dow): 30 November 2009
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399.
ETSI
---------------------- Page: 8 ----------------------
SIST EN 301 908-12 V3.1.1:2008
7 ETSI EN 301 908-12 V3.1.1 (2008-04)
1 Scope
The present document applies to the following radio equipment types:
• Repeaters for IMT-2000 CDMA multi-carrier (cdma2000).
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1.
Table 1: CDMA multi-carrier Repeater service frequency bands
Direction of transmission CDMA multi-carrier Repeater service Band Class (BC)
frequency bands
Forward link (DL) 2 110 MHz to 2 170 MHz
6
Reverse link (UL) 1 920 MHz to 1 980 MHz
Forward link (DL) 1 805 MHz to 1 880 MHz
8
Reverse link (UL) 1 710 MHz to 1 785 MHz
Forward link (DL) 925 MHz to 960 MHz
9
Reverse link (UL) 880 MHz to 915 MHz
Forward link (DL) 2 620 MHz to 2 690 MHz
13
Reverse link (UL) 2 500 MHz to 2 570 MHz
Repeaters for IMT-2000 CDMA multi-carrier (cdma2000) may support:
1) operation in cdma2000 spread spectrum systems as defined in TIA-2000.2 [5], referred to herein as operation
in Type 1 cdma2000 systems; or
2) operation in cdma2000 High Rate Packet Data Systems as defined in TIA-856 [11], referred to herein in
Type 2 cdma2000 systems.
The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2,
which states that "[…] radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org/.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
ETSI
---------------------- Page: 9 ----------------------
SIST EN 301 908-12 V3.1.1:2008
8 ETSI EN 301 908-12 V3.1.1 (2008-04)
[2] Void.
[3] Void.
[4] ANSI/TIA-97-F-1 (June 2006): "Recommended Minimum Performance Standard for cdma2000
Spread Spectrum Base Stations - Addendum 1".
[5] TIA-2000.2-D-1 (January 2006): "Physical Layer Standard for cdma2000 Spread Spectrum
Systems - Addendum 1".
[6] Void.
[7] Void.
[8] Void.
[9] Void.
[10] Void.
[11] TIA-856-A-1[E] (February 2007): "cdma2000 High Rate Packet Data Air Interface Specification -
Addendum 1".
[12] TIA-864-A (January 2006): "Recommended Minimum Performance Standards for cdma2000 High
Rate Packet Data Access Network Equipment".
[13] Void.
[14] TIA-1037 (2007): "Recommended Minimum Performance Standard for cdma2000 Spread
Spectrum Repeater".
[15] TIA-1030-B (December 2006): "Band Class Specification for cdma2000 Spread Spectrum
Systems".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following
apply:
Band Class (BC): set of frequency channels and a numbering scheme for these channels
Base Station (BS): fixed station used for communicating with mobile stations
NOTE 1: Base stations for IMT-2000 CDMA multi-carrier (cdma2000) may support, operation in cdma2000 spread
spectrum systems as defined in TIA-2000.2 [5], referred to herein as operation in Type 1 cdma2000
system, or operation in cdma2000 High Rate Packet Data Systems as defined in TIA-856 [11], referred to
herein as operation in Type 2 cdma2000 systems.
NOTE 2: Depending upon the context, the term base station may refer to a cell, a sector within a cell, an MSC, and
access network or other part of the wireless system. See also MSC.
CDMA channel: set of channels transmitted from the base station and the mobile stations on a given frequency
CDMA channel number: 11-bit number corresponding to the centre of the CDMA frequency assignment
CDMA frequency assignment: 1,23 MHz segment of spectrum
NOTE: For band classes 6, 8, and 9, the channel is centred on one of the 50 kHz channels.
chip rate: rate of "chips" (modulated symbols after spreading) per second
ETSI
---------------------- Page: 10 ----------------------
SIST EN 301 908-12 V3.1.1:2008
9 ETSI EN 301 908-12 V3.1.1 (2008-04)
Code Division Multiple Access (CDMA): technique for spread-spectrum multiple-access digital communications that
creates channels through the use of unique code sequences
donor coupling loss: coupling loss between the Repeater and the donor base station
Down Link (DL): signal path where base station or Repeater transmits and the mobile receives
NOTE: Also referred to as the forward link.
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
forward CDMA channel: CDMA channel from a base station or Repeater to mobile stations
NOTE: The forward CDMA channel contains one or more code channels that are transmitted on a CDMA
frequency assignment using a particular pilot PN offset.
High Rate Packet Data (HRPD): CDMA technique optimized for data communications in Type 2 cdma2000 systems
maximum output power (Pmax): mean power level per carrier measured at the antenna connector of the Repeater in
specified reference condition
mean power: total calorimetric power measured in a specified bandwidth at the antenna connector.
mobile station: station intended to be used while in motion or during halts at unspecified points
NOTE: Mobile stations include portable units (e.g. hand-held personal units) and units installed in vehicles and
HRPD access terminals.
pass band: frequency range that the Repeater operates in with operational configuration
NOTE 1: This frequency range can correspond to one or several consecutive nominal 5 MHz channels. If they are
not consecutive each subset of channels is considered as an individual pass band.
NOTE 2: The Repeater can have one or several pass bands.
radio configuration: set of forward traffic channel and reverse traffic channel transmission formats that are
characterized by physical layer parameters such as transmission rates, modulation characteristics, and spreading rate
NOTE: Radio configurations are defined in TIA-2000.2 [5], clauses 2.1.3 and 3.1.3.
Resolution Band Width (RBW): measured in Hz and represents the frequency over which power is integrated in a
spectrum analyser to display the amplitude at the centre of the integration frequency range
repeater: device that receives, amplifies and transmits the radiated or conducted RF carrier both in the down-link
direction (from the base station to the mobile area) and in the up-link direction (from the mobile to the base station)
NOTE: A repeater can be a device that receives, amplifies and transmits one ore more radiated or conducted
CDMA channel(s) both in the down-link direction (from the base station to the mobile area) and in the
up-link direction (from the mobile to the base station).
reverse CDMA channel: CDMA channel from the mobile station to the base station
NOTE: From the base station's perspective, the reverse CDMA channel is the sum of all mobile station
transmissions on a CDMA frequency assignment.
RF carrier: direct-sequence spread RF channel
NOTE: For the forward CDMA channel, the number of RF carriers is 1 for spreading rate 1 and 3 for spreading
rate 3; for the reverse CDMA channel, there is one RF carrier.
spreading rate: PN chip rate of the forward CDMA channel or the reverse CDMA channel, defined as a multiple of
1,2288 Mcps
ETSI
---------------------- Page: 11 ----------------------
SIST EN 301 908-12 V3.1.1:2008
10 ETSI EN 301 908-12 V3.1.1 (2008-04)
spreading rate 1: spreading rate 1 is often referred to as "1X"
NOTE 1: A spreading rate 1 forward CDMA channel uses a single direct-sequence spread carrier with a chip rate
of 1,2288 Mcps.
NOTE 2: A spreading rate 1 reverse CDMA channel uses a single direct-sequence spread carrier with a chip rate of
1,2288 Mcps.
spreading rate 3: spreading rate 3 is often referred to as "3X"
NOTE 1: A spreading rate 3 forward CDMA channel uses three direct-sequence spread carriers (see multiple-
carrier forward channel) each with a chip rate of 1,2288 Mcps.
NOTE 2: A spreading rate 3 reverse CDMA channel uses a single direct-sequence spread carrier with a chip rate of
3,6864 Mcps.
Up Link (UL): signal path where the mobile or Repeater transmits and the base station receives
NOTE: Also referred to as the reverse link.
User Equipment (UE): mobile station supporting operation in cdma2000 spread spectrum systems
NOTE: See TIA-2000.2 [5], referred to herein as operation in Type 1 cdma2000 system; access terminal
supporting operation in cdma2000 High Rate Packet Data Systems as defined in
TIA-856 [11], referred to herein as operation in Type 2 cdma2000 system; and mobile station supporting
operation in Type 1 and Type 2 cdma2000 systems.
3.2 Symbols
For the purposes of the present document, the following symbols apply:
dBc ratio (in dB) of the sideband power of a signal, measured in a given bandwidth at a given
frequen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.