SIST EN 302 498-2 V1.1.1:2010
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Technical characteristics for SRD equipment using Ultra WideBand technology (UWB) - Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
- Abstract
Create harmonised Standards for UWB Sensors Object classification in the range of 2,2 GHz to 8,5 GHz.
The present document specifies the requirements for Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Additionally it specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz. Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on specific Material Sensing devices using Ultra-Wideband (UWB) technology [amended 26 June 2009] [i.5].
- Status
- Published
- Public Enquiry End Date
- 31-Oct-2009
- Publication Date
- 02-Sep-2010
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 11-Aug-2010
- Due Date
- 16-Oct-2010
- Completion Date
- 03-Sep-2010
- Mandate
- M/329
Buy Documents
ETSI EN 302 498-2 V1.1.1 (2009-08) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 498-2 V1.1.1 (2010-04) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 498-2 V1.1.1 (2010-06) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
SIST EN 302 498-2 V1.1.1:2010 is a harmonized ETSI European standard for UWB Short Range Devices used in object discrimination and characterization for power tool applications. It specifies the radio spectrum and electromagnetic compatibility requirements for equipment operating in the 2.2 GHz to 8.5 GHz band, together with reduced emissions outside that band. The document is used by manufacturers, test labs, and conformity assessors who need to check whether this kind of UWB equipment meets the essential requirements of article 3.2 of the R&TTE Directive.
What does SIST EN 302 498-2 V1.1.1:2010 specify?
SIST EN 302 498-2 V1.1.1:2010 specifies the requirements for UWB object discrimination and characterization equipment for power tool devices in the 2.2 GHz to 8.5 GHz range. It also sets reduced emissions in the adjacent ranges from 0.96 GHz to 2.2 GHz and from 8.5 GHz to 10.6 GHz, which matters because spurious energy outside the operating band is part of the compliance check.
The standard applies to UWB object discrimination and characterisation equipment for imaging and object detection applications, with an integral antenna, and it distinguishes two equipment categories:
- Category A - user protection in benchtop tools and table saws
- Category B - breakthrough protection in drilling devices
It does not cover UWB communication devices, ground penetrating radar devices, through-wall radar imaging devices, or building material devices as defined in ITU-R Recommendation SM.1754 and EN 302 435-1.
| Annex | What it covers |
|---|---|
| Annex A | HS Requirements and conformance Test specifications Table (HS-RTT) |
| Annex B | EN title in the official languages |
| Annex C | Bibliography |
What are the key requirements of SIST EN 302 498-2 V1.1.1:2010?
SIST EN 302 498-2 V1.1.1:2010 sets transmitter limits, design conditions, and the test approach used to demonstrate conformance. In practice, this means a provider has to declare the operating environmental profile, then show that the equipment stays within the defined limits under those declared conditions.
Transmitter emissions and pulse behavior
Clause 4.2.1 requires control of Maximum Undesired UWB Emissions (UE) and Maximum Other Emissions (OE) by reference to the relevant clauses of EN 302 498-1. Clause 4.2.1.3 also requires compliance with the Total Power spectral density (UE-TP) limit for category A equipment. For users, this means the transmitter must be measured against specific spectral limits, not just checked for basic operation.
Clause 4.2.1.4 covers Minimum pulse repetition frequency for impulsive UWB technology, and it requires a declaration tied to the companion part. That matters because the pulse structure is part of the regulated behavior, not only the emitted power.
Design and spectrum-sharing functions
Clause 4.2.2.1 requires compliance with the design requirements in Annex B of EN 302 498-1. Clause 4.2.2.2 requires Listen before Talk (LBT) receiver thresholds where LBT applies. Clause 4.2.2.3 covers the Duty Cycle Limit for category B equipment, and clause 4.2.2.4 covers Total Power Control (TPC).
In practice, these requirements mean the equipment must be designed to share spectrum responsibly, and the manufacturer must decide whether the relevant optional functions are present and then prove they work as required.
Testing for compliance
Clause 5 requires testing at representative points within the declared environmental profile. If performance changes with temperature, humidity, or other environmental conditions, the tests have to cover enough of those conditions to support confidence in compliance.
Clause 5.2 identifies the essential radio test suites for UE, OE, UE-TP, and LBT, using the procedures in EN 302 498-1. Clause 5.3 says measurement interpretation follows EN 302 498-1, so this part standard depends on the companion part for the detailed test method and result interpretation.
Annex A is important because it ties each requirement to its test specification and says whether the requirement is unconditional or conditional. That helps a manufacturer or test lab see exactly what must be demonstrated for a given product configuration.
What terms does SIST EN 302 498-2 V1.1.1:2010 define?
UWB means Ultra WideBand, the radio technology used for the object discrimination and characterization applications covered by the standard.
SRD means Short Range Device, the equipment class addressed by the ETSI ERM series.
UE means Undesired UWB Emissions, the unwanted emissions measured against the transmitter limits.
OE means Other Emissions, the emissions outside the wanted UWB emission category that still have to stay within defined limits.
LBT means Listen before Talk, a spectrum-sharing method that checks the channel before transmission.
TPC means Total Power Control, a function used to manage transmitted power in accordance with the standard.
HS-RTT means Harmonized Standard Requirements and conformance Test specifications Table, the annex table that links requirements to test procedures.
Who uses SIST EN 302 498-2 V1.1.1:2010?
Manufacturers of UWB equipment for power tools use this standard when designing the radio section and preparing technical documentation. Test laboratories use it to run the emission and behavior tests listed in the companion part. Regulatory, quality, and conformity teams use it to check whether a device falls within the harmonized scope for article 3.2 of the R&TTE Directive.
Which standards are used with SIST EN 302 498-2 V1.1.1:2010?
ETSI EN 302 498-1 provides the technical characteristics, detailed limits, test methods, definitions, symbols, and abbreviations that this part refers to throughout.
ETSI EG 201 399 is the ETSI guide for producing candidate Harmonized Standards under the R&TTE Directive.
Directive 1999/5/EC is the R&TTE Directive whose essential requirements this standard addresses.
Directive 98/34/EC is cited for the standardization and notification procedure used to produce the document.
ECC/DEC/(07)01 is the European decision for specific Material Sensing devices using UWB technology that the covered equipment operates in accordance with.
ITU-R Recommendation SM.1754 provides the measurement techniques for UWB transmissions and the definitions used to exclude certain device types.
ETSI EN 302 435-1 is cited for building material analysis and classification equipment and for the related LBT context.
What does the SIST EN 302 498-2 V1.1.1:2010 document contain?
The document contains the scope, references, definitions section, technical requirements, compliance testing, and the HS-RTT annex. It also includes the informative annex for official-language titles and a bibliography with related ETSI documents. Clause 4 and clause 5 are the core of the standard because they connect the required radio behavior to the corresponding test suites. Annex A is the main compliance map, while the other annexes support administration and background reading.
Buy Documents
ETSI EN 302 498-2 V1.1.1 (2009-08) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 498-2 V1.1.1 (2010-04) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 498-2 V1.1.1 (2010-06) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 302 498-2 V1.1.1:2010 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Technical characteristics for SRD equipment using Ultra WideBand technology (UWB) - Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". This standard covers: Create harmonised Standards for UWB Sensors Object classification in the range of 2,2 GHz to 8,5 GHz. The present document specifies the requirements for Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Additionally it specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz. Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on specific Material Sensing devices using Ultra-Wideband (UWB) technology [amended 26 June 2009] [i.5].
Create harmonised Standards for UWB Sensors Object classification in the range of 2,2 GHz to 8,5 GHz. The present document specifies the requirements for Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Additionally it specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz. Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on specific Material Sensing devices using Ultra-Wideband (UWB) technology [amended 26 June 2009] [i.5].
SIST EN 302 498-2 V1.1.1:2010 is classified under the following ICS (International Classification for Standards) categories: 33.060.99 - Other equipment for radiocommunications; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 302 498-2 V1.1.1:2010 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, TRRTP124; Standardization Mandates: M/329. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 302 498-2 V1.1.1:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
Draft ETSI EN 302 498-2 V1.1.1 (2009-08)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Technical characteristics for SRD equipment
using Ultra WideBand technology (UWB);
Object Discrimination and Characterization Applications
for power tool devices operating in the frequency band
from 2,2 GHz to 8,5 GHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 Draft ETSI EN 302 498-2 V1.1.1 (2009-08)
Reference
DEN/ERM-TGUWB-002-2
Keywords
radio, regulation, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Draft ETSI EN 302 498-2 V1.1.1 (2009-08)
Contents
Intellectual Property Rights.4
Foreword.4
Introduction .4
1 Scope.5
2 References.6
2.1 Normative references.6
2.2 Informative references.6
3 Definitions, symbols and abbreviations .7
3.1 Definitions.7
3.2 Symbols.7
3.3 Abbreviations.7
4 Technical requirements specifications .7
4.1 Environmental profile.7
4.2 Conformance requirements.7
4.2.1 Transmitter requirements.7
4.2.1.1 Maximum Undesired UWB Emissions (UE) .7
4.2.1.2 Maximum Other Emissions (OE).7
4.2.1.3 Total Power spectral density (UE-TP) .7
4.2.1.4 Minimum pulse repetition frequency .7
4.2.2 Other equipment requirements.8
4.2.2.1 Design requirements.8
4.2.2.2 Listen before Talk .8
4.2.2.3 Duty Cycle Limit.8
4.2.2.4 Total Power Control (TPC).8
5 Testing for compliance with technical requirements.8
5.1 Environmental conditions for testing .8
5.2 Essential radio test suites.8
5.2.1 Transmitter test suites .8
5.2.1.1 Maximum UWB Emissions (UE) .8
5.2.1.2 Maximum Other Emissions (OE).8
5.2.1.3 Total Power spectral density (UE-TP) .8
5.2.2 Other test suites.8
5.2.2.1 Listen before Talk .8
5.3 Interpretation of measurement results .9
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).10
Annex B (informative): The EN title in the official languages .12
Annex C (informative): Bibliography.13
History .14
ETSI
4 Draft ETSI EN 302 498-2 V1.1.1 (2009-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Public Enquiry phase
of the ETSI standards Two-step Approval Procedure.
The present document is part 2 a multi-part deliverable covering Ultra WideBand (UWB); Discrimination and
Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; as
identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 [i.1].
ETSI
5 Draft ETSI EN 302 498-2 V1.1.1 (2009-08)
1 Scope
The present document specifies the requirements for Object Discrimination and Characterization Applications for
power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Additionally it specifies reduced
emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz.
Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on
specific Material Sensing devices using Ultra-Wideband (UWB) technology [amended 26 June 2009] [i.5].
Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands
Transmit 2 200 MHz to 8 500 MHz
Receive 2 200 MHz to 8 500 MHz
The present document applies to:
a) UWB object discrimination and characterisation equipment for imaging and object detection applications;
b) equipment fitted with an integral antenna;
c) Two main categories:
1) Category A: user protection in bentchtop tools / table saws (quasi fixed sawing equipment).
2) Category B: breakthrough protection in drilling devices.
The present document does not apply to:
• UWB communication devices; and
• Ground penetrating radar devices; and
• through-wall radar imaging devices;
• building material devices;
as defined in ITU-R Recommendation SM.1754 [i.3] and EN 302 435-1 [i.6].
The present document specifies the equipment which is designed to not radiate into the free space. It is designed to
function only when positioned such that it radiates directly into the absorptive material such as walls and other building
materials which absorb emis
...
Final draft ETSI EN 302 498-2 V1.1.1 (2010-04)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Technical characteristics for SRD equipment
using Ultra WideBand technology (UWB);
Object Discrimination and Characterization Applications
for power tool devices operating in the frequency band
from 2,2 GHz to 8,5 GHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 Final draft ETSI EN 302 498-2 V1.1.1 (2010-04)
Reference
DEN/ERM-TGUWB-002-2
Keywords
radio, regulation, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Final draft ETSI EN 302 498-2 V1.1.1 (2010-04)
Contents
Intellectual Property Rights . 4
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Technical requirements specifications . 7
4.1 Environmental profile . 7
4.2 Conformance requirements . 7
4.2.1 Transmitter requirements . 7
4.2.1.1 Maximum Undesired UWB Emissions (UE) . 7
4.2.1.2 Maximum Other Emissions (OE) . 7
4.2.1.3 Total Power spectral density (UE-TP) . 7
4.2.1.4 Minimum pulse repetition frequency . 7
4.2.2 Other equipment requirements . 8
4.2.2.1 Design requirements. 8
4.2.2.2 Listen before Talk . 8
4.2.2.3 Duty Cycle Limit . 8
4.2.2.4 Total Power Control (TPC) . 8
5 Testing for compliance with technical requirements . 8
5.1 Environmental conditions for testing . 8
5.2 Essential radio test suites . 8
5.2.1 Transmitter test suites . 8
5.2.1.1 Maximum UWB Emissions (UE) . 8
5.2.1.2 Maximum Other Emissions (OE) . 8
5.2.1.3 Total Power spectral density (UE-TP) . 8
5.2.2 Other test suites . 8
5.2.2.1 Listen before Talk . 8
5.3 Interpretation of measurement results . 9
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 10
Annex B (informative): The EN title in the official languages . 12
Annex C (informative): Bibliography . 13
History . 14
ETSI
4 Final draft ETSI EN 302 498-2 V1.1.1 (2010-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards Two-step Approval Procedure.
The present document is part 2 a multi-part deliverable covering Ultra WideBand (UWB); Discrimination and
Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; as
identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 [i.1].
ETSI
5 Final draft ETSI EN 302 498-2 V1.1.1 (2010-04)
1 Scope
The present document specifies the requirements for Object Discrimination and Characterization Applications for
power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Additionally it specifies reduced
emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz.
Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on
specific Material Sensing devices using Ultra-Wideband (UWB) technology [amended 26 June 2009] [i.5].
Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands
Transmit 2 200 MHz to 8 500 MHz
Receive 2 200 MHz to 8 500 MHz
The present document applies to:
a) UWB object discrimination and characterisation equipment for imaging and object detection applications;
b) equipment fitted with an integral antenna;
c) Two main categories:
1) Category A: user protection in bentchtop tools / table saws (quasi fixed sawing equipment).
2) Category B: breakthrough protection in drilling devices.
The present document does not apply to:
• UWB communication devices; and
• Ground penetrating radar devices; and
• through-wall radar imaging devices;
• building material devices;
as defined in ITU-R Recommendation SM.1754 [i.3] and EN 302 435-1 [i.6].
The present document specifies the equipment which is designed to not radiate into the free space. It is designed to
function only when positioned such that it radiates directly into the absorptive material such as walls and other building
materials which absorb emissions.
The pr
...
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Technical characteristics for SRD equipment
using Ultra WideBand technology (UWB);
Object Discrimination and Characterization Applications
for power tool devices operating in the frequency band
from 2,2 GHz to 8,5 GHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 ETSI EN 302 498-2 V1.1.1 (2010-06)
Reference
DEN/ERM-TGUWB-002-2
Keywords
radio, regulation, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 302 498-2 V1.1.1 (2010-06)
Contents
Intellectual Property Rights . 4
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
4 Technical requirements specifications . 7
4.1 Environmental profile . 7
4.2 Conformance requirements . 7
4.2.1 Transmitter requirements . 7
4.2.1.1 Maximum Undesired UWB Emissions (UE) . 7
4.2.1.2 Maximum Other Emissions (OE) . 7
4.2.1.3 Total Power spectral density (UE-TP) . 7
4.2.1.4 Minimum pulse repetition frequency . 7
4.2.2 Other equipment requirements . 7
4.2.2.1 Design requirements. 7
4.2.2.2 Listen before Talk . 7
4.2.2.3 Duty Cycle Limit . 7
4.2.2.4 Total Power Control (TPC) . 7
5 Testing for compliance with technical requirements . 8
5.1 Environmental conditions for testing . 8
5.2 Essential radio test suites . 8
5.2.1 Transmitter test suites . 8
5.2.1.1 Maximum UWB Emissions (UE) . 8
5.2.1.2 Maximum Other Emissions (OE) . 8
5.2.1.3 Total Power spectral density (UE-TP) . 8
5.2.2 Other test suites . 8
5.2.2.1 Listen before Talk . 8
5.3 Interpretation of measurement results . 8
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 9
Annex B (informative): The EN title in the official languages . 11
Annex C (informative): Bibliography . 12
History . 13
ETSI
4 ETSI EN 302 498-2 V1.1.1 (2010-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 2 a multi-part deliverable covering Ultra WideBand (UWB); Discrimination and
Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; as
identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
National transposition dates
Date of adoption of this EN: 15 June 2010
Date of latest announcement of this EN (doa): 30 September 2010
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2011
Date of withdrawal of any conflicting National Standard (dow): 31 March 2012
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 [i.1].
ETSI
5 ETSI EN 302 498-2 V1.1.1 (2010-06)
1 Scope
The present document specifies the requirements for Object Discrimination and Characterization Applications for
power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Additionally it specifies reduced
emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz.
Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on
specific Material Sensing devices using Ultra-Wideband (UWB) technology [amended 26 June 2009] [i.5].
Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands
Transmit 2 200 MHz to 8 500 MHz
Receive 2 200 MHz to 8 500 MHz
The present document applies to:
a) UWB object discrimination and characterisation equipment for imaging and object detection applications;
b) equipment fitted with an integral antenna;
c) Two main categories:
1) Category A: user protection in bentchtop tools / table saws (quasi fixed sawing equipment).
2) Category B: breakthrough protection in drilling devices.
The present document does not apply to:
• UWB communication devices; and
• Ground penetrating radar devices; and
• through-wall radar imaging devices;
• building material devices;
as defined in ITU-R Recommendation SM.1754 [i.3] and EN 302 435-1 [i.6].
The present document specifie
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Technical characteristics for SRD equipment using Ultra WideBand technology (UWB) - Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 302 498-2 Version 1.1.1SIST EN 302 498-2 V1.1.1:2010en01-oktober-2010SIST EN 302 498-2 V1.1.1:2010SLOVENSKI
STANDARD
ETSI ETSI EN 302 498-2 V1.1.1 (2010-06) 2
Reference DEN/ERM-TGUWB-002-2 Keywords radio, regulation, SRD, testing, UWB ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 498-2 V1.1.1:2010
ETSI ETSI EN 302 498-2 V1.1.1 (2010-06) 3 Contents Intellectual Property Rights . 4 Foreword . 4 Introduction . 4 1 Scope . 5 2 References . 5 2.1 Normative references . 6 2.2 Informative references . 6 3 Definitions, symbols and abbreviations . 6 3.1 Definitions . 6 3.2 Symbols . 6 3.3 Abbreviations . 6 4 Technical requirements specifications . 7 4.1 Environmental profile . 7 4.2 Conformance requirements . 7 4.2.1 Transmitter requirements . 7 4.2.1.1 Maximum Undesired UWB Emissions (UE) . 7 4.2.1.2 Maximum Other Emissions (OE) . 7 4.2.1.3 Total Power spectral density (UE-TP) . 7 4.2.1.4 Minimum pulse repetition frequency . 7 4.2.2 Other equipment requirements . 7 4.2.2.1 Design requirements. 7 4.2.2.2 Listen before Talk . 7 4.2.2.3 Duty Cycle Limit . 7 4.2.2.4 Total Power Control (TPC) . 7 5 Testing for compliance with technical requirements . 8 5.1 Environmental conditions for testing . 8 5.2 Essential radio test suites . 8 5.2.1 Transmitter test suites . 8 5.2.1.1 Maximum UWB Emissions (UE) . 8 5.2.1.2 Maximum Other Emissions (OE) . 8 5.2.1.3 Total Power spectral density (UE-TP) . 8 5.2.2 Other test suites . 8 5.2.2.1 Listen before Talk . 8 5.3 Interpretation of measurement results . 8 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 9 Annex B (informative): The EN title in the official languages . 11 Annex C (informative): Bibliography . 12 History . 13
ETSI ETSI EN 302 498-2 V1.1.1 (2010-06) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 2 a multi-part deliverable covering Ultra WideBand (UWB); Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
National transposition dates Date of adoption of this EN: 15 June 2010 Date of latest announcement of this EN (doa): 30 September 2010 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 March 2011 Date of withdrawal of any conflicting National Standard (dow): 31 March 2012
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular structure is shown in EG 201 399 [i.1]. SIST EN 302 498-2 V1.1.1:2010
ETSI ETSI EN 302 498-2 V1.1.1 (2010-06) 5 1 Scope The present document specifies the requirements for Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Additionally it specifies reduced emissions in the ranges from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz.
Equipment covered by the present document operates in accordance with amended ECC Decision ECC/DEC(07)01 on specific Material Sensing devices using Ultra-Wideband (UWB) technology [amended 26 June 2009] [i.5]. Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands Transmit 2 200 MHz to 8 500 MHz Receive 2 200 MHz to 8 500 MHz
The present document applies to:
a) UWB object discrimination and characterisation equipment for imaging and object det
...