oSIST prEN IEC 60086-2-2:2024

SLOVENSKI STANDARD
01-november-2024
Primarne baterije - 2-2. del: Fizikalne in električne značilnosti (specifikacije) za
litijeve baterije
Primary batteries - Part 2-2: Physical and electrical specifications of lithium batteries
Piles électriques - Partie 2-2: Spécifications physiques et électriques des piles au lithium
Ta slovenski standard je istoveten z: prEN IEC 60086-2-2:2024
ICS:
29.220.10 Primarni členi in baterije Primary cells and batteries
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

35/1551/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60086-2-2 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-09-06 2024-11-29
SUPERSEDES DOCUMENTS:
35/1532/CD, 35/1538A/CC
IEC TC 35 : PRIMARY CELLS AND BATTERIES
SECRETARIAT: SECRETARY:
Japan Mr Takao Uyama
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
SC 3C,TC 21,SC 21A,TC 61,TC 108
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Primary batteries - Part 2-2: Physical and electrical specifications of lithium batteries

PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

2 IEC 60086-2-2 ED1 © IEC 2024
1 CONTENTS
2 CONTENTS . 2
3 FOREWORD . 4
4 INTRODUCTION . 6
5 1 Scope . 7
6 2 Normative references . 7
7 3 Terms and definitions . 7
8 4 Battery dimensions, symbols . 9
9 5 Dimensional stability . 9
10 6 Validity of testing . 9
11 7 Constitution of the battery specification tables . 9
12 8 Physical and electrical specifications . 11
13 8.1 Category 1 batteries . 11
14 8.1.1 General . 11
15 8.1.2 Category 1 – Void . 12
16 8.1.3 Category 1 – Specification: FR10G445 . 12
17 8.1.4 Category 1 – Specification: FR14505 . 13
18 8.2 Category 2 batteries – Specifications: CR14250, CR15H270, CR17345,
19 CR17450, BR17335 . 14
20 8.3 Category 3 battery – Specification: CR11108 . 15
21 8.4 Category 4 batteries . 15
22 8.4.1 General . 15
23 8.4.2 Category 4 – Specifications: CR1025, CR1216, CR1220, CR1225,
24 CR1616, CR2012, CR1620, CR2016, CR2412, CR1632, CR2025,
25 CR2320, CR2032, CR2330, CR2430, CR2354, CR3032, CR2450,
26 CR2477, BR1225, BR2016, BR2320, BR2325, BR3032 . 16
27 8.5 Category 5 battery – Specification: 2CR13252 . 18
28 8.6 Category 6 batteries . 19
29 8.6.1 Category 6 – Specification: CR-P2 . 19
30 8.6.2 Category 6 – Specification: 2CR5 . 20
31 Annex A (informative) Tabulation of batteries by application . 21
32 Annex B (informative) Cross-reference index . 23
33 Annex C (informative) Index reference to subclause . 25
34 Annex D (informative) Compliance checklist . 26
35 Bibliography . 27
37 Figure 1 – Dimensional drawing: Category 1 . 11
38 Figure 2 – Dimensional drawing: FR10G445 . 12
39 Figure 3 – Dimensional drawing: FR14505 . 13
40 Figure 4 – Dimensional drawing: CR14250, CR15H270, CR17345, CR17450, BR17335 . 14
41 Figure 5 – Dimensional drawing: CR11108 . 15
42 Figure 6 – Dimensional drawing: Category 4 . 15
43 Figure 7 – Dimensional drawing: CR1025, CR1216, CR1220, CR1225, CR1616,
44 CR2012, CR1620, CR2016, CR2412, CR1632, CR2025, CR2320, CR2032, CR2330,
45 CR2430, CR2354, CR2477, CR3032, CR2450, BR1225, BR2016, BR2320, BR2325,
46 BR3032 . 16

IEC 60086-2-2 ED1 © IEC 2024 3
47 Figure 8 – Dimensional drawing: 2CR13252 . 18
48 Figure 9 – Dimensional drawing: CR-P2 . 19
49 Figure 10 – Dimensional drawing: 2CR5 . 20
51 Table A.1 – Digital audio . 21
52 Table A.2 – Digital still camera . 21
53 Table A.3 – Electronic key . 21
54 Table A.4 – High intensity lighting . 21
55 Table A.5 – Photo . 21
56 Table A.6 – Portable lighting (LED) . 22
57 Table A.7 – Radio/clock/remote control . 22
58 Table A.8 – Toy (motor) . 22
59 Table B.1 – Category 1 batteries. 23
60 Table B.2 – Category 2 batteries. 23
61 Table B.3 – Category 4 batteries. 24
62 Table B.4 – Category 6 batteries. 24
63 Table C.1 – Index . 25
64 Table D.1 – Summary of specified items . 26
4 IEC 60086-2-2 ED1 © IEC 2024
67 INTERNATIONAL ELECTROTECHNICAL COMMISSION
68 ____________
70 PRIMARY BATTERIES –
72 Part 2-2:
73 Physical and electrical specifications
74 of lithium batteries
76 FOREWORD
77 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
78 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
79 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
80 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
81 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
82 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
83 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
84 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
85 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
86 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
87 consensus of opinion on the relevant subjects since each technical committee has representation from all
88 interested IEC National Committees.
89 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
90 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
91 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
92 misinterpretation by any end user.
93 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
94 transparently to the maximum extent possible in their national and regional publications. Any divergence between
95 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
96 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
97 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
98 services carried out by independent certification bodies.
99 6) All users should ensure that they have the latest edition of this publication.
100 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
101 members of its technical committees and IEC National Committees for any personal injury, property damage or
102 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
103 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
104 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
105 indispensable for the correct application of this publication.
106 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
107 rights. IEC shall not be held responsible for identifying any or all such patent rights.
108 International Standard IEC 60086-2-2 has been prepared by IEC technical committee 35:
109 Primary cells and batteries.
110 This first edition cancels and replaces the fourteenth edition of IEC 60086-2 published in 2021.
111 This edition constitutes a technical revision.
112 This edition includes the following significant technical changes with respect to the previous
113 edition:
114 a) separation of batteries with aqueous electrolyte into a separate Part 2-1: Physical and
115 electrical specifications;
116 b) maximum open circuit voltage of FR10G445 and FR14505 was changed from 1,83 to 1,90
117 V;
118 c) load of digital audio test for FR10G445 was changed from 50mA to 75mA and MAD was
119 modified;
120 d) portable lighting test was added for FR10G445;
121 e) motor/toy and radio /clock /remote control test was added for FR14505;

IEC 60086-2-2 ED1 © IEC 2024 5
122 f) Annex D for common designation of IEC 60086-2:2021 was moved to IEC
...