iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 74:2000

(Main)

Couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes - Requirements and test procedures

Couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes - Requirements and test procedures

Mutual understanding and communication. Safety. Interchangeability. Removal of barriers to trade.

Kupplungen, Zentrierbolzen und Fußplatten für Stahlrohr-Arbeitsgerüste und -Tragegerüste - Anforderungen, Prüfungen

Verstaendigung und Kommunikation. Sicherheit. Austauschbarkeit. Abbau von Handelshemmnissen.

Raccords, goujons d'assemblage et semelles pour échafaudages de service et d'étaiement en tubes d'acier - Spécifications et méthodes d'essai

Compréhension mutuelle et communication. Sécurité. Interchangeabilité. Elimination des entraves aux échanges.

Cevne spojke, vezne centične spojke in bazne plošče za delovne in nosilne odre iz jeklenih cevi - Zahteve in postopki preskušanja

General Information

Status
Withdrawn
Publication Date
30-Apr-2000
Withdrawal Date
31-Mar-2006
ICS
91.220 - Construction equipment
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Apr-2006
Due Date
01-Apr-2006
Completion Date
01-Apr-2006
Ref Project
EN 74:1988 - Couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes - Requirements and test procedures

Relations

Replaced By
SIST EN 74-3:2007 - Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures
Effective Date
01-Sep-2007
Replaced By
SIST EN 74-1:2006 - Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
Effective Date
01-Apr-2006

Buy Standard

EN 74:2000EN 74:2000
PreviousNext
Standard
EN 74:2000
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 74:2000
01-maj-2000
&HYQHVSRMNHYH]QHFHQWLþQHVSRMNHLQED]QHSORãþH]DGHORYQHLQQRVLOQHRGUHL]
MHNOHQLKFHYL=DKWHYHLQSRVWRSNLSUHVNXãDQMD
Couplers, loose spigots and base-plates for use in working scaffolds and falsework made
of steel tubes - Requirements and test procedures
Kupplungen, Zentrierbolzen und Fußplatten für Stahlrohr-Arbeitsgerüste und -
Tragegerüste - Anforderungen, Prüfungen
Raccords, goujons d'assemblage et semelles pour échafaudages de service et
d'étaiement en tubes d'acier - Spécifications et méthodes d'essai
Ta slovenski standard je istoveten z: EN 74:1988
ICS:
91.220 Gradbena oprema Construction equipment
SIST EN 74:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 74:2000

---------------------- Page: 2 ----------------------

SIST EN 74:2000

---------------------- Page: 3 ----------------------

SIST EN 74:2000

---------------------- Page: 4 ----------------------

SIST EN 74:2000

----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 74-2:2022(Main)
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
EN 74-2:2022

EN 74-2 specifies:
-   materials;
-   design requirements;
-   specified values for resistances and stiffnesses which a coupler has to achieve under test;
-   test procedures and assessment;
for the following special couplers:
-   screw or wedge half couplers, sleeve couplers with shear studs, right angle reduction couplers and swivel reduction couplers.
It gives recommendations for on going production control.
These couplers are for use principally in temporary works. Each coupler is able to be fixed to at least one side to one 48,3 mm diameter steel or aluminium tube. For the other side of reduction couplers, this standard specifies requirements for the diameter and wall thickness of tubes.
For testing, screw couplers are tightened with a torque of 50 Nm and wedge couplers are tightened with a 500 g hammer until the jarring blow.
Other special half couplers such as half couplers attached by riveting, used mainly for members of prefabricated scaffolds, are outside the scope of this document.
NOTE   Information on design using special couplers is given in Annex B.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 74-1:2022(Main)
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
EN 74-1:2022

This document specifies, for right angle couplers, swivel couplers, sleeve couplers and parallel couplers working by friction:
-   materials;
-   design requirements;
-   strength classes with different structural parameters including values for resistance and stiffness;
-   test procedures;
-   assessment;
and gives
-   recommendations for ongoing production control.
For testing, screw couplers are tightened to a torque of 50 Nm and wedge couplers are tightened with a 500 g hammer until the jarring blow.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12418:2022(Main)
Masonry and stone cutting-off machines for job site - Safety
EN 12418:2021

This document applies to transportable masonry and stone cutting-off machines stationary during work, principally used on job site building construction for cutting-off stones, other mineral construction materials and composite materials having at least one supporting surface. The power for the tool rotation is supplied by electrical or internal combustion prime motor. This document deals with all significant hazards pertinent to masonry and stone cutting-off machines for job site (see Clause 4), when they are used as intended and under the conditions foreseen by the manufacturer. This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
These machines are designed for use with rotating diamond cutting-off wheels with a continuous rim and/or segmented rim according to prEN 13236:2017.
This document does not apply to:
-   metal cutting-off machines;
-   wood and timber sawing machines;
-   machines with a feed or descent mechanism other than manual, or with a pedal;
-   mobile machines on a trolley travelling on the ground;
-   hand-held portable grinding and cutting-off machines;
-   hand-held portable grinding and cutting-off machines mounted on a support to be used in a fixed position.
This document does not cover the operation of transportable masonry and stone cutting-off machines in potential explosive atmospheres.
This document covers electrical hazards making reference to relevant European Standards (see 4.3).
Those hazards that are relevant for all mechanical, electrical, hydraulic, pneumatic and other equipment of machinery and that are dealt with in standards for common use are not covered by this document. Reference to pertinent standards of this kind is made where such standards are applicable and so far necessary.
In this document, the masonry and stone cutting-off machines for job site construction are called: "cutting-off machines" or "machines", and cutting-off wheels are also called: "tools".
This document applies primarily to machines which are manufactured after the date of approval of the standard by CEN.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1004-2:2022(Main)
Mobile access and working towers made of prefabricated elements - Part 2: Rules and guidelines for the preparation of an instruction manual
EN 1004-2:2021

This European standard gives rules and guidelines for the preparation of instructions manuals for mobile access and working towers in accordance with EN 1004.
This standard is intended for all parties involved in the preparation of instructions for use, for example: Suppliers, technical writers, technical illustrators, translators or other people engaged in the work of conceiving and drafting such instructions for use.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12609:2021(Main)
Truck mixers - Safety requirements
EN 12609:2021

The Standard is to specify the safety requirements applicable to truck mixers. A truck mixer as defined by this standard is used for the transportation and mixing of concrete, mortars and mineral building materials. The safety requirements will cover the superstructure (mixer equipment) and its interface with the truck chassis but not cover the truck itself and the elements required for the basic transport function of the truck. Other machinery that can be combined with the truck mixer, such as concrete pumps, distributor masts and conveyor belts will not be covered by the document.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1004-1:2021(Main)
Mobile access and working towers made of prefabricated elements - Part 1: Materials, dimensions, design loads, safety and performance requirements
EN 1004-1:2020

This document applies to the design of mobile access and working towers made of prefabricated elements with dimensions which are fixed by the design and with a height up to 12 m (indoors) and up to 8 m (outdoors). This document applies to mobile access and working towers used as temporary work equipment.
This document:
-   gives guidelines for the choice of the main dimensions and stabilizing methods,
-   gives safety and performance requirements; and
-   gives information on complete towers.
This product standard does not apply to scaffolds according to EN 12810-1 and EN 12811-1.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1009-2:2020(Main)
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery and continuous handling equipment
EN 1009-2:2020

This part of EN 1009 to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of feeding machinery for the mechanical processing of minerals and similar solid materials. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1 for machines that have been designed and built according to the provisions of this part of EN 1009. This part of EN 1009, together with EN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to feeding machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
NOTE 1 EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery.
NOTE 2 Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard. This part of EN 1009 is not applicable to feeding machinery which are manufactured before the date of publication of this document by CEN

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1009-4:2020(Main)
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 4: Specific requirements for screening machinery
EN 1009-4:2020

This part of prEN 1009, to be used together with prEN 1009-1, specifies the safety requirements and their verification for the design and construction of screening machinery for the mechanical processing in quarrying, recycling and processing mineral and by-products as defined in 3.1.
In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this part of prEN 1009 are different from those which are stated in prEN 1009-1, the requirements of this part of prEN 1009 take precedence over the requirements of prEN 1009-1 for machines that have been designed and built according to the provisions of this part of prEN 1009.
This part of prEN 1009, together with prEN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to screening machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
NOTE 1   EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery.
NOTE 2   Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard.
This document is not applicable to screening machinery which are manufactured before the date of publication of this document by CEN.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1009-5:2020(Main)
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery
EN 1009-5:2020

This part of prEN 1009 to be used together with prEN 1009-1, specifies the safety requirements and their verification for the design and construction of machinery for cleaning, water recycling, mud treatment and sorting (other than screens) for the mechanical processing in quarrying, recycling and processing mineral and by-products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
The requirements of this part are complementary to the common requirements formulated in prEN 1009-1. This part does not repeat the requirements from prEN 1009-1, but adds or replaces them. When requirements of this part of prEN 1009 are different from those which are stated in prEN 1009-1, the requirements of this part of prEN 1009 take precedence over the requirements of prEN 1009-1 for machines that have been designed and built according to the provisions of this part of prEN 1009.
This part of prEN 1009, together with prEN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to machinery for cleaning, recycling, mud treatment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole lifetime of the machine (see Clause 4).
NOTE 1   EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery.
NOTE 2   Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard.
This part of prEN 1009 is not applicable to machinery for cleaning, recycling, mud treatment which are manufactured before the date of publication of this document by CEN.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1009-1:2020(Main)
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 1: Common requirements for machinery and processing plants
EN 1009-1:2020

Processing mineral and by-products (cement, lime and gypsum, sand and gravel, industrial minerals, metalliferous ore, production and demolition waste, slag handling, hard and soft rock aggregates, coal) in construction and surface mining.
It deals with the following types of individual machines for the mechanical processing of minerals and similar solid materials:
-   feeding machinery as per part 2;
-   crushing machinery as per part 3;
-   milling machinery as per part 3;
-   screening machinery as per part 4;
-   machinery for cleaning, water recycling, sorting (other than screens) and mud treatment as per part 5;
-   mobile and semi-mobile machinery as per part 6.
This part gives the common safety requirements for mechanical processing machines used for quarrying, recycling and processing mineral and by-products (cement, lime and gypsum, sand and gravel, industrial minerals, metalliferous ore, production and demolition waste, slag handling, hard and soft rock aggregates, coal) in construction and surface mining and is intended to be used in conjunction with one of the prEN 1009-2 to -6. These machine specific parts (prEN 1009-2 to -6) do not repeat the requirements from prEN 1009-1:2017, but add or replace the requirements for the machine type in question.
NOTE   The requirements specified in this part of the standard are common to two or more types of machines for the mechanical processing of minerals and similar solid materials.
Specific requirements in prEN 1009-2 to -6 take precedence over the respective requirements of prEN 1009-1:2017.
The standard also covers assemblies of two or more of the mentioned machines which function as an integrated whole. The machines included in the scope of this standard can be fixed, semi-mobile or mobile. The standard covers transportation, erection, commissioning, use and maintenance of single machines or combination of single machines.
This standard deals with significant hazards, common to the types of machines listed in this scope when they are used as intended and under conditions for misuse which are reasonably foreseeable by the manufacturer (see Clause 4) and to the hazards due to the combination of these machines and specifies the appropriate measures to eliminate or reduce the risks arising from the significant hazards.
1.1   Design relating to road traffic regulations is not covered by this standard.
1.2   This standard does not cover hazards arising from the use of the machines in potentially explosive atmospheres as well as from processing of explosive materials and risks related to electromagnetic compatibility.
1.3   This document is not applicable to machinery which are manufactured before the date of publication of this document by CEN.

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day