SIST EN 301 489-17 V3.3.1:2024

Draft ETSI EN 301 489-17 V3.2.6 (2023-06)

HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 17: Specific conditions for
Broadband and Wideband Data Transmission Systems;
Harmonised Standard for ElectroMagnetic Compatibility

2 Draft ETSI EN 301 489-17 V3.2.6 (2023-06)

Reference
REN/ERM-EMC-409
Keywords
EMC, harmonised standard, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2023.
All rights reserved.
ETSI
3 Draft ETSI EN 301 489-17 V3.2.6 (2023-06)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Test conditions . 9
4.1 General . 9
4.2 Arrangements for test signals . 9
4.2.1 Arrangements for test signals at the input of transmitters . 9
4.2.2 Arrangements for test signals at the output of transmitters . 9
4.2.3 Arrangements for test signals at the input of receivers . 9
4.2.4 Arrangements for test signals at the output of receivers . 9
4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 10
4.2.6 Equipment with an external antenna connector . 10
4.2.7 Equipment without an external antenna connector (integral antenna) . 10
4.2.8 Equipment with more than one antenna . 10
4.3 Exclusion bands . 10
4.3.1 General . 10
4.3.2 Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band . 11
4.3.3 5 GHz RLAN . 11
4.3.4 Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems . 11
4.3.5 6 GHz RLAN . 11
4.4 Void . 12
4.5 Normal test modulation . 12
5 Performance assessment . 12
5.1 General . 12
5.2 Arrangements for the assessment of host dependent equipment and plug-in cards . 12
5.3 Assessment procedures . 12
6 Performance criteria . 13
6.1 General performance criteria . 13
6.2 Performance table . 13
6.2.1 Performance criteria overview . 13
6.2.2 Minimum performance level. 13
6.3 Performance criteria for Continuous phenomena . 13
6.4 Performance criteria for Transient phenomena . 14
7 Requirements . 14
7.1 Emission . 14
7.1.1 General . 14
7.1.2 Special Conditions . 14
7.2 Immunity . 15
7.2.1 General . 15
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 17
Annex B (informative): Change history . 19
History . 20
ETSI
4 Draft ETSI EN 301 489-17 V3.2.6 (2023-06)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the ®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.12] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 17 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

ETSI
5 Draft ETSI EN 301 489-17 V3.2.6 (2023-06)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
6 Draft ETSI EN 301 489-17 V3.2.6 (2023-06)
1 Scope
The present document specifies technical characteristics and methods of measurements for broadband and wideband
data transmission system equipment including the associated ancillary equipment in respect of electromagnetic
compatibility, as detailed in table 1.
Technical specifications related to the radio function of the radio equipment are not included in the present document.
Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
broadband and wideband data transmission systems as detailed in table 1.
NOTE 1: In the context of the present document, broadband and wideband are interchangeable.
Table 1: Radio Technologies in scope of the present document
Technology ETSI Standard
Wideband transmission systems;
ETSI EN 300 328 [i.8]
Data transmission equipment operating in the 2,4 GHz band
5 GHz RLAN ETSI EN 301 893 [i.3]
6 GHz WAS/RLAN ETSI EN 303 687 [i.2]
Wireless Access Systems (WAS);
ETSI EN 302 502 [i.4]
5,8 GHz fixed broadband data transmitting systems
Multi-Gigabit Wireless Systems (MGWS) in the 60 GHz band ETSI EN 302 567 [i.6]
Wideband Data Transmission Systems (WDTS) for Fixed Network Radio
ETSI EN 303 722 [i.5]
Equipment operating in the 57 GHz to 71 GHz band

Emissions requirements in the present document are specified for frequencies above 9 kHz.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE 2: The relationship between the present document and essential requirements of article 3.1(b) of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or non-
specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
[2] EN 55032 (2015)+A11 (2020): "Electromagnetic compatibility of multimedia equipment -
Emission Requirements" (produced by CENELEC).
ETSI
7 Draft ETSI EN 301 489-17 V3.2.6 (2023-06)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] ETSI EN 303 687: "6 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum".
[i.3] ETSI EN 301 893: "5 GHz RLAN; Harmonised Standard for access to radio spectrum".
[i.4] ETSI EN 302 502 (V2.1.3): "Wireless Access Systems (WAS); 5,8 GHz fixed broadband data
transmitting systems; Harmonised Standard for access to radio spectrum".
[i.5] ETSI EN 303 722: "Wideband Data Transmission Systems (WDTS) for Fixed Network
Radio Equipment operating in the 57 GHz to 71 GHz band; Harmonised Standard for access to
radio spectrum".
[i.6] ETSI EN 302 567: "Multiple-Gigabit/s radio equipment operating in the 60 GHz band;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU".
[i.7] Void.
[i.8] ETSI EN 300 328: "Wideband transmission systems; Data transmission equipment operating in the
2,4 GHz band; Harmonised Standard for access to radio spectrum".
[i.9] Void.
[i.10] Void.
[i.11] Void.
[i.12] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 301 489-1 [1] and the following apply:
ancillary equipment: electrical or electronic equipment, that is intended to be used with a receiver or transmitter
NOTE 1: It is considered as an ancillary equipment if:
 the equipment is intended for use with a receiver or transmitter to provide additional operational
and/or control features to the radio equipment, (e.g. to extend control to another position or
location); and
 the ancillary equipment cannot be used without being connected to radio equipment to provide user
functions independently of a receiver or transmitter; and
ETSI
8 Draft ETSI EN 301 489-17 V3.2.6 (2023-06)
 the receiver or transmitter, to which it is connected, is capable of providing some intended
operation such as transmitting and/or receiving without the ancillary equipment (i.e. it is not a
sub-unit of the main equipment essential to the main equipment basic functions).
NOTE 2: An example of ancillary equipment would be a docking station for radio equipment whose interface is
dedicated to a particular product or range of products.
Equipment Under Test (EUT): equipment subject to the performance requirements of the present document
fixed equipment: equipment intended for use in a fixed location and fitted with one or more antennas
NOTE: The equipment may be fitted with either antenna socket(s) or integral antenna(s) or both.
host: any equipment which has complete user functionality when not connected to the radio equipment part and to
which the radio equipment part provides additional functionality and to which connection is necessary for the radio
equipment part to offer functionality
plug-in radio device: equipment, including slide-in radio cards, intended to be used with or within a variety of host
systems, using their control functions and power supply
portable equipment: radio equipment intended for portable use and powered by integral batteries or battery
NOTE: Devices will typically be handheld.
stand-alone radio equipment: equipment that is intended primarily as communications equipment and that is normally
used on a stand-alone basis
vehicular equipment: radio equipment intended for installation and use in a vehicle, and powered by the main battery
of the vehicle
3.2 Symbols
For the purposes of the present document, the following symbols apply:
Pmin minimum power required to establish a communication link
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AC Alternating Current
ACK ACKnowledgement
ARQ Automatic Retransmission reQuest
DC Direct Current
EMC ElectroMagnetic Compatibility
ERM EMC and Radio spectrum Matters
EUT Equipment Under Test
FER Frame Error Rate
MGWS Multi-Gigabit Wireless Systems
NACK Not ACKnowledgement
PER Packet Error Rate
RF Radio Frequency
RLAN Radio Local Area Network
WAS Wireless Access Systems
WDTS Wideband Data Transmission Systems
ETSI
9 Draft ETSI EN 301 489-17 V3.2.6 (2023-06)
4 Test conditions
4.1 General
For the purposes of the present document, the test conditions of ETSI EN 301 489-1 [1], clause 4, shall apply as
appropriate. Further product related test conditions for wideband data communications systems are specified in
clauses 4.2 to 4.5.
T
...

ETSI EN 301 489-17 V3.3.1 (2024-09)

HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 17: Specific conditions for
Broadband and Wideband Data Transmission Systems;
Harmonised Standard for ElectroMagnetic Compatibility

2 ETSI EN 301 489-17 V3.3.1 (2024-09)

Reference
REN/ERM-EMC-409
Keywords
EMC, harmonised standard, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 ETSI EN 301 489-17 V3.3.1 (2024-09)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Test conditions . 9
4.1 General . 9
4.2 Arrangements for test signals . 9
4.2.1 Arrangements for test signals at the input of transmitters . 9
4.2.2 Arrangements for test signals at the output of transmitters . 9
4.2.3 Arrangements for test signals at the input of receivers . 9
4.2.4 Arrangements for test signals at the output of receivers . 10
4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 10
4.2.6 Equipment with an external antenna connector . 10
4.2.7 Equipment without an external antenna connector (integral antenna) . 10
4.2.8 Equipment with more than one antenna . 10
4.3 Exclusion bands . 11
4.3.1 General . 11
4.3.2 Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band . 11
4.3.3 5 GHz RLAN . 11
4.3.4 Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems . 11
4.3.5 6 GHz WAS/RLAN . 12
4.4 Void . 12
4.5 Normal test modulation . 12
5 Performance assessment . 12
5.1 General . 12
5.2 Arrangements for the assessment of host dependent equipment and plug-in cards . 12
5.3 Assessment procedures . 12
6 Performance criteria . 13
6.1 General performance criteria . 13
6.2 Performance table . 13
6.2.1 Performance criteria overview . 13
6.3 Performance criteria for Continuous phenomena . 14
6.4 Performance criteria for Transient phenomena . 14
7 Requirements . 14
7.1 Emission . 14
7.1.1 General . 14
7.2 Immunity . 15
7.2.1 General . 15
7.2.2 Special Conditions . 16
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 18
Annex B (informative): Change history . 20
History . 21
ETSI
4 ETSI EN 301 489-17 V3.3.1 (2024-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the ®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.12] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 17 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates
Date of adoption of this EN: 23 September 2024
Date of latest announcement of this EN (doa): 31 December 2024
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 June 2025
Date of withdrawal of any conflicting National Standard (dow): 30 June 2026

ETSI
5 ETSI EN 301 489-17 V3.3.1 (2024-09)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
6 ETSI EN 301 489-17 V3.3.1 (2024-09)
1 Scope
The present document specifies technical characteristics and methods of measurements for broadband and wideband
data transmission system equipment including the associated ancillary equipment in respect of electromagnetic
compatibility, as detailed in table 1.
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
broadband and wideband data transmission systems as detailed in table 1.
NOTE 1: In the context of the present document, broadband and wideband are interchangeable.
Table 1: Radio Technologies in scope of the present document
Technology ETSI Standard
Wideband transmission systems;
ETSI EN 300 328 [i.8]
Data transmission equipment operating in the 2,4 GHz band
5 GHz RLAN ETSI EN 301 893 [i.3]
6 GHz WAS/RLAN ETSI EN 303 687 [i.2]
Wireless Access Systems (WAS);
ETSI EN 302 502 [i.4]
5,8 GHz fixed broadband data transmitting systems
Multi-Gigabit Wireless Systems (MGWS) in the 60 GHz band ETSI EN 302 567 [i.6]
Wideband Data Transmission Systems (WDTS) for Fixed Network Radio
ETSI EN 303 722 [i.5]
Equipment operating in the 57 GHz to 71 GHz band

Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio
equipment are not included in the present document.
NOTE 2: Such technical specifications are normally found in the relevant product family standards for AC mains
powered equipment (e.g. EN IEC 61000-3-2 [i.13] and EN 61000-3-3 [i.14]).
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE 3: The relationship between the present document and essential requirements of article 3.1(b) of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or non-
specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
ETSI
7 ETSI EN 301 489-17 V3.3.1 (2024-09)
[2] Void.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] ETSI EN 303 687: "6 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum".
[i.3] ETSI EN 301 893: "5 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum".
[i.4] ETSI EN 302 502 (V2.1.3): "Wireless Access Systems (WAS); 5,8 GHz fixed broadband data
transmitting systems; Harmonised Standard for access to radio spectrum".
[i.5] ETSI EN 303 722: "Wideband Data Transmission Systems (WDTS) for Fixed Network Radio
Equipment operating in the 57 GHz to 71 GHz band; Harmonised Standard for access to radio
spectrum".
[i.6] ETSI EN 302 567: " Multiple-Gigabit/s radio equipment operating in the 60 GHz band;
Harmonised Standard for access to radio spectrum".
[i.7] Void.
[i.8] ETSI EN 300 328: "Wideband transmission systems; Data transmission equipment operating in the
2,4 GHz band; Harmonised Standard for access to radio spectrum".
[i.9] Void.
[i.10] Void.
[i.11] Void.
[i.12] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.13] EN IEC 61000-3-2 (2019) + A1(2021): "Electromagnetic compatibility (EMC) - Part 3-2: Limits -
Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)".
[i.14] EN 61000-3-3 (2013) + A2(2021): "Electromagnetic compatibility (EMC) - Part 3-3: Limits -
Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional
connection".
ETSI
8 ETSI EN 301 489-17 V3.3.1 (2024-09)
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 301 489-1 [1] and the following apply:
ancillary equipment: electrical or electronic equipment, that is intended to be used with a receiver or transmitter
NOTE 1: It is considered as an ancillary equipment if:
 the equipment is intended for use with a receiver or transmitter to provide additional operational
and/or control features to the radio equipment, (e.g. to extend control to another position or
location); and
 the ancillary equipment cannot be used without being connected to radio equipment to provide user
functions independently of a receiver or transmitter; and
 the receiver or transmitter, to which it is connected, is capable of providing some intended
operation such as transmitting and/or receiving without the ancillary equipment (i.e. it is not a
sub-unit of the main equipment essential to the main equipment basic functions).
NOTE 2: An example of ancillary equipment would be a docking station for radio equipment whose interface is
dedicated to a particular product or range of products.
Equipment Under Test (EUT): equipment subject to the performance requirements of the present document
fixed equipment: equipment intended for use in a fixed location and fitted with one or more antennas
NOTE: The equipment may be fitted with either antenna socket(s) or integral antenna(s) or both.
host: any equipment which has complete user functionality when not connected to the radio equipment part and to
which the radio equipment part provides additional functionality and to which connection is necessary for the radio
equipment part to offer functionality
plug-in radio device: equipment, including slide-in radio cards, intended to be used with or within a variety of host
systems, using their control functions and power supply
portable equipment: radio equipment intended for portable use and powered by integral batteries or battery
NOTE: Devices will typically be handheld.
stand-alone radio equipment: equipment that is intended primarily as communications equipment and that is normally
used on a stand-alone basis
vehicular equipment: radio equipment intended for installation and use in a vehicle, and powered by the main battery
of the vehicle
3.2 Symbols
For the purposes of the present document, the following symbols apply:
P minimum power required to establish a communication link
min
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AC Alternating Current
ACK ACKnowledgement
ARQ Automatic Retransmission reQuest
DC Direct Current
ETSI
9 ETSI EN 301 489-17 V3.3.1 (2024-09)
EMC ElectroMagnetic Compatibility
ERM EMC and Radio spectrum Matters
EUT Equipment Under Test
FER Frame Error Rate
MGWS Multi-Gigabit Wireless Systems
NACK Not ACKnowledgement
PER Packet Error Rate
RF Radio Frequency
RLAN Radio Local Area Network
WAS Wireless Access Systems
WDTS Wideband Data Transmission Systems
WLAN Wireless Local Area Network
4 Test conditions
4.1 General
For the purposes of the present document, the test conditions of ETSI EN 301 489-1 [1], clause 4, shall apply except
where modified in clauses 4.2 to 4.5.
The radio equipment may
...

Final draft ETSI EN 301 489-17 V3.3.0 (2024-07)

HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 17: Specific conditions for
Broadband and Wideband Data Transmission Systems;
Harmonised Standard for ElectroMagnetic Compatibility

2 Final draft ETSI EN 301 489-17 V3.3.0 (2024-07)

Reference
REN/ERM-EMC-409
Keywords
EMC, harmonised standard, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 Final draft ETSI EN 301 489-17 V3.3.0 (2024-07)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Test conditions . 9
4.1 General . 9
4.2 Arrangements for test signals . 9
4.2.1 Arrangements for test signals at the input of transmitters . 9
4.2.2 Arrangements for test signals at the output of transmitters . 9
4.2.3 Arrangements for test signals at the input of receivers . 9
4.2.4 Arrangements for test signals at the output of receivers . 9
4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 10
4.2.6 Equipment with an external antenna connector . 10
4.2.7 Equipment without an external antenna connector (integral antenna) . 10
4.2.8 Equipment with more than one antenna . 10
4.3 Exclusion bands . 10
4.3.1 General . 10
4.3.2 Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band . 11
4.3.3 5 GHz RLAN . 11
4.3.4 Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems . 11
4.3.5 6 GHz WAS/RLAN . 11
4.4 Void . 12
4.5 Normal test modulation . 12
5 Performance assessment . 12
5.1 General . 12
5.2 Arrangements for the assessment of host dependent equipment and plug-in cards . 12
5.3 Assessment procedures . 12
6 Performance criteria . 13
6.1 General performance criteria . 13
6.2 Performance table . 13
6.2.1 Performance criteria overview . 13
6.3 Performance criteria for Continuous phenomena . 14
6.4 Performance criteria for Transient phenomena . 14
7 Requirements . 14
7.1 Emission . 14
7.1.1 General . 14
7.2 Immunity . 15
7.2.1 General . 15
7.2.2 Special Conditions . 16
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 18
Annex B (informative): Change history . 20
History . 21
ETSI
4 Final draft ETSI EN 301 489-17 V3.3.0 (2024-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the ®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This final draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI Standardisation Request deliverable Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.12] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 17 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

ETSI
5 Final draft ETSI EN 301 489-17 V3.3.0 (2024-07)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
6 Final draft ETSI EN 301 489-17 V3.3.0 (2024-07)
1 Scope
The present document specifies technical characteristics and methods of measurements for broadband and wideband
data transmission system equipment including the associated ancillary equipment in respect of electromagnetic
compatibility, as detailed in table 1.
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
broadband and wideband data transmission systems as detailed in table 1.
NOTE 1: In the context of the present document, broadband and wideband are interchangeable.
Table 1: Radio Technologies in scope of the present document
Technology ETSI Standard
Wideband transmission systems;
ETSI EN 300 328 [i.8]
Data transmission equipment operating in the 2,4 GHz band
5 GHz RLAN ETSI EN 301 893 [i.3]
6 GHz WAS/RLAN ETSI EN 303 687 [i.2]
Wireless Access Systems (WAS);
ETSI EN 302 502 [i.4]
5,8 GHz fixed broadband data transmitting systems
Multi-Gigabit Wireless Systems (MGWS) in the 60 GHz band ETSI EN 302 567 [i.6]
Wideband Data Transmission Systems (WDTS) for Fixed Network Radio
ETSI EN 303 722 [i.5]
Equipment operating in the 57 GHz to 71 GHz band

Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio
equipment are not included in the present document.
NOTE 2: Such technical specifications are normally found in the relevant product family standards for AC mains
powered equipment (e.g. EN IEC 61000-3-2 [i.13] and EN 61000-3-3 [i.14]).
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE 3: The relationship between the present document and essential requirements of article 3.1(b) of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or non-
specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
ETSI
7 Final draft ETSI EN 301 489-17 V3.3.0 (2024-07)
[2] Void.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] ETSI EN 303 687: "6 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum".
[i.3] ETSI EN 301 893: "5 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum".
[i.4] ETSI EN 302 502 (V2.1.3): "Wireless Access Systems (WAS); 5,8 GHz fixed broadband data
transmitting systems; Harmonised Standard for access to radio spectrum".
[i.5] ETSI EN 303 722: "Wideband Data Transmission Systems (WDTS) for Fixed Network Radio
Equipment operating in the 57 GHz to 71 GHz band; Harmonised Standard for access to radio
spectrum".
[i.6] ETSI EN 302 567: " Multiple-Gigabit/s radio equipment operating in the 60 GHz band;
Harmonised Standard for access to radio spectrum".
[i.7] Void.
[i.8] ETSI EN 300 328: "Wideband transmission systems; Data transmission equipment operating in the
2,4 GHz band; Harmonised Standard for access to radio spectrum".
[i.9] Void.
[i.10] Void.
[i.11] Void.
[i.12] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.13] EN IEC 61000-3-2 (2019) + A1(2021): "Electromagnetic compatibility (EMC) - Part 3-2: Limits -
Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)".
[i.14] EN 61000-3-3 (2013) + A2(2021): "Electromagnetic compatibility (EMC) - Part 3-3: Limits -
Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional
connection".
ETSI
8 Final draft ETSI EN 301 489-17 V3.3.0 (2024-07)
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 301 489-1 [1] and the following apply:
ancillary equipment: electrical or electronic equipment, that is intended to be used with a receiver or transmitter
NOTE 1: It is considered as an ancillary equipment if:
 the equipment is intended for use with a receiver or transmitter to provide additional operational
and/or control features to the radio equipment, (e.g. to extend control to another position or
location); and
 the ancillary equipment cannot be used without being connected to radio equipment to provide user
functions independently of a receiver or transmitter; and
 the receiver or transmitter, to which it is connected, is capable of providing some intended
operation such as transmitting and/or receiving without the ancillary equipment (i.e. it is not a
sub-unit of the main equipment essential to the main equipment basic functions).
NOTE 2: An example of ancillary equipment would be a docking station for radio equipment whose interface is
dedicated to a particular product or range of products.
Equipment Under Test (EUT): equipment subject to the performance requirements of the present document
fixed equipment: equipment intended for use in a fixed location and fitted with one or more antennas
NOTE: The equipment may be fitted with either antenna socket(s) or integral antenna(s) or both.
host: any equipment which has complete user functionality when not connected to the radio equipment part and to
which the radio equipment part provides additional functionality and to which connection is necessary for the radio
equipment part to offer functionality
plug-in radio device: equipment, including slide-in radio cards, intended to be used with or within a variety of host
systems, using their control functions and power supply
portable equipment: radio equipment intended for portable use and powered by integral batteries or battery
NOTE: Devices will typically be handheld.
stand-alone radio equipment: equipment that is intended primarily as communications equipment and that is normally
used on a stand-alone basis
vehicular equipment: radio equipment intended for installation and use in a vehicle, and powered by the main battery
of the vehicle
3.2 Symbols
For the purposes of the present document, the following symbols apply:
Pmin minimum power required to establish a communication link
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AC Alternating Current
ACK ACKnowledgement
ARQ Automatic Retransmission reQuest
DC Direct Current
ETSI
9 Final draft ETSI EN 301 489-17 V3.3.0 (2024-07)
EMC ElectroMagnetic Compatibility
ERM EMC and Radio spectrum Matters
EUT Equipment Under Test
FER Frame Error Rate
MGWS Multi-Gigabit Wireless Systems
NACK Not ACKnowledgement
PER Packet Error Rate
RF Radio Frequency
RLAN Radio Local Area Network
WAS Wireless Access Systems
WDTS Wideband Data Transmission Systems
4 Test conditions
4.1 General
For the purposes of the present document, the test conditions of ETSI EN 301 489-1 [1], clause 4, shall apply except
where modified in cla
...

SLOVENSKI STANDARD
01-november-2024
Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 17.
del: Posebni pogoji za širokopasovne sisteme za prenos podatkov - Harmonizirani
standard za elektromagnetno združljivost
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part
17: Specific conditions for Broadband and Wideband Data Transmission Systems -
Harmonised Standard for ElectroMagnetic Compatibility
Ta slovenski standard je istoveten z: ETSI EN 301 489-17 V3.2.6 (2023-06)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ETSI EN 301 489-17 V3.3.1 (2024-09)

HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 17: Specific conditions for
Broadband and Wideband Data Transmission Systems;
Harmonised Standard for ElectroMagnetic Compatibility

2 ETSI EN 301 489-17 V3.3.1 (2024-09)

Reference
REN/ERM-EMC-409
Keywords
EMC, harmonised standard, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 ETSI EN 301 489-17 V3.3.1 (2024-09)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Test conditions . 9
4.1 General . 9
4.2 Arrangements for test signals . 9
4.2.1 Arrangements for test signals at the input of transmitters . 9
4.2.2 Arrangements for test signals at the output of transmitters . 9
4.2.3 Arrangements for test signals at the input of receivers . 9
4.2.4 Arrangements for test signals at the output of receivers . 10
4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 10
4.2.6 Equipment with an external antenna connector . 10
4.2.7 Equipment without an external antenna connector (integral antenna) . 10
4.2.8 Equipment with more than one antenna . 10
4.3 Exclusion bands . 11
4.3.1 General . 11
4.3.2 Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band . 11
4.3.3 5 GHz RLAN . 11
4.3.4 Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems . 11
4.3.5 6 GHz WAS/RLAN . 12
4.4 Void . 12
4.5 Normal test modulation . 12
5 Performance assessment . 12
5.1 General . 12
5.2 Arrangements for the assessment of host dependent equipment and plug-in cards . 12
5.3 Assessment procedures . 12
6 Performance criteria . 13
6.1 General performance criteria . 13
6.2 Performance table . 13
6.2.1 Performance criteria overview . 13
6.3 Performance criteria for Continuous phenomena . 14
6.4 Performance criteria for Transient phenomena . 14
7 Requirements . 14
7.1 Emission . 14
7.1.1 General . 14
7.2 Immunity . 15
7.2.1 General . 15
7.2.2 Special Conditions . 16
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 18
Annex B (informative): Change history . 20
History . 21
ETSI
4 ETSI EN 301 489-17 V3.3.1 (2024-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the ®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.12] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 17 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates
Date of adoption of this EN: 23 September 2024
Date of latest announcement of this EN (doa): 31 December 2024
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 June 2025
Date of withdrawal of any conflicting National Standard (dow): 30 June 2026

ETSI
5 ETSI EN 301 489-17 V3.3.1 (2024-09)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
6 ETSI EN 301 489-17 V3.3.1 (2024-09)
1 Scope
The present document specifies technical characteristics and methods of measurements for broadband and wideband
data transmission system equipment including the associated ancillary equipment in respect of electromagnetic
compatibility, as detailed in table 1.
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
broadband and wideband data transmission systems as detailed in table 1.
NOTE 1: In the context of the present document, broadband and wideband are interchangeable.
Table 1: Radio Technologies in scope of the present document
Technology ETSI Standard
Wideband transmission systems;
ETSI EN 300 328 [i.8]
Data transmission equipment operating in the 2,4 GHz band
5 GHz RLAN ETSI EN 301 893 [i.3]
6 GHz WAS/RLAN ETSI EN 303 687 [i.2]
Wireless Access Systems (WAS);
ETSI EN 302 502 [i.4]
5,8 GHz fixed broadband data transmitting systems
Multi-Gigabit Wireless Systems (MGWS) in the 60 GHz band ETSI EN 302 567 [i.6]
Wideband Data Transmission Systems (WDTS) for Fixed Network Radio
ETSI EN 303 722 [i.5]
Equipment operating in the 57 GHz to 71 GHz band

Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio
equipment are not included in the present document.
NOTE 2: Such technical specifications are normally found in the relevant product family standards for AC mains
powered equipment (e.g. EN IEC 61000-3-2 [i.13] and EN 61000-3-3 [i.14]).
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE 3: The relationship between the present document and essential requirements of article 3.1(b) of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or non-
specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
ETSI
7 ETSI EN 301 489-17 V3.3.1 (2024-09)
[2] Void.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] ETSI EN 303 687: "6 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum".
[i.3] ETSI EN 301 893: "5 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum".
[i.4] ETSI EN 302 502 (V2.1.3): "Wireless Access Systems (WAS); 5,8 GHz fixed broadband data
transmitting systems; Harmonised Standard for access to radio spectrum".
[i.5] ETSI EN 303 722: "Wideband Data Transmission Systems (WDTS) for Fixed Network Radio
Equipment operating in the 57 GHz to 71 GHz band; Harmonised Standard for access to radio
spectrum".
[i.6] ETSI EN 302 567: " Multiple-Gigabit/s radio equipment operating in the 60 GHz band;
Harmonised Standard for access to radio spectrum".
[i.7] Void.
[i.8] ETSI EN 300 328: "Wideband transmission systems; Data transmission equipment operating in the
2,4 GHz band; Harmonised Standard for access to radio spectrum".
[i.9] Void.
[i.10] Void.
[i.11] Void.
[i.12] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.13] EN IEC 61000-3-2 (2019) + A1(2021): "Electromagnetic compatibility (EMC) - Part 3-2: Limits -
Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)".
[i.14] EN 61000-3-3 (2013) + A2(2021): "Electromagnetic compatibility (EMC) - Part 3-3: Limits -
Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional
connection".
ETSI
8 ETSI EN 301 489-17 V3.3.1 (2024-09)
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 301 489-1 [1] and the following apply:
ancillary equipment: electrical or electronic equipment, that is intended to be used with a receiver or transmitter
NOTE 1: It is considered as an ancillary equipment if:
 the equipment is intended for use with a receiver or transmitter to provide additional operational
and/or control features to the radio equipment, (e.g. to extend control to another position or
location); and
 the ancillary equipment cannot be used without being connected to radio equipment to provide user
functions independently of a receiver or transmitter; and
 the receiver or transmitter, to which it is connected, is capable of providing some intended
operation such as transmitting and/or receiving without the ancillary equipment (i.e. it is not a
sub-unit of the main equipment essential to the main equipment basic functions).
NOTE 2: An example of ancillary equipment would be a docking station for radio equipment whose interface is
dedicated to a particular product or range of products.
Equipment Under Test (EUT): equipment subject to the performance requirements of the present document
fixed equipment: equipment intended for use in a fixed location and fitted with one or more antennas
NOTE: The equipment may be fitted with either antenna socket(s) or integral antenna(s) or both.
host: any equipment which has complete user functionality when not connected to the radio equipment part and to
which the radio equipment part provides additional functionality and to which connection is necessary for the radio
equipment part to offer functionality
plug-in radio device: equipment, including slide-in radio cards, intended to be used with or within a variety of host
systems, using their control functions and power supply
portable equipment: radio equipment intended for portable use and powered by integral batteries or battery
NOTE: Devices will typically be handheld.
stand-alone radio equipment: equipment that is intended primarily as communications equipment and that is normally
used on a stand-alone basis
vehicular equipment: radio equipment intended for installation and use in a vehicle, and powered by the main battery
of the vehicle
3.2 Symbols
For the purposes of the present document, the following symbols apply:
P minimum power required to establish a communication link
min
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AC Alternating Current
ACK ACKnowledgement
ARQ Automatic Retransmission reQuest
DC Direct Current
ETSI
9 ETSI EN 301 489-17 V3.3.1 (2024-09)
EMC ElectroMagnetic Compatibility
ERM EMC and Radio spectrum Matters
EUT Equipment Under Test
FER Frame Erro
...