SIST EN 60317-47:2014/A1:2024

SLOVENSKI STANDARD
01-september-2024
Specifikacije za posebne vrste navijalnih žic - 47. del: Z aromatskim poliimidom
emajlirana pravokotna bakrena žica, razred 240 - Dopolnilo A1 (IEC 60317-
47:2013/AMD1:2024)
Specifications for particular types of winding wires - Part 47: Aromatic polyimide
enamelled rectangular copper wire, class 240 (IEC 60317-47:2013/AMD1:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 47:
Flachdrähte aus Kupfer, lackisoliert mit aromatischen Polyimiden, Klasse 240 (IEC
60317-47:2013/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 47: Fil de section
rectangulaire en cuivre émaillé avec polyimide aromatique, classe 240 (IEC 60317-
47:2013/AMD1:2024)
Ta slovenski standard je istoveten z: EN 60317-47:2014/A1:2024
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60317-47:2014/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 47:
Aromatic polyimide enamelled rectangular copper wire, class
(IEC 60317-47:2013/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 47: Fil de section rectangulaire en cuivre émaillé Wickeldrähten - Teil 47: Flachdrähte aus Kupfer, lackisoliert
avec polyimide aromatique, classe 240 mit aromatischen Polyimiden, Klasse 240
(IEC 60317-47:2013/AMD1:2024) (IEC 60317-47:2013/AMD1:2024)
This amendment A1 modifies the European Standard EN 60317-47:2014; it was approved by CENELEC on 2024-07-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-47:2014/A1:2024 E

European foreword
The text of document 55/1994A/CDV, future IEC 60317-47/AMD1, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-
47:2014/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-47:2013/AMD1:2024 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Replace the references with:
Publication Year Title EN/HD Year
IEC 60317-0-2 2020 Specifications for particular types of EN IEC 60317-0-2 2020
winding wires - Part 0-2: General
requirements - Enamelled rectangular
copper wire
IEC 60317-47 ®
Edition 2.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –

Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240

Spécifications pour types particuliers de fils de bobinage –

Partie 47: Fil de section rectangulaire en cuivre émaillé avec polyimide

aromatique, classe 240
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10  ISBN 978-2-8322-9055-2

– 2 – IEC 60317-47:2013/AMD1:2024
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES –

Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Spe
...