EN 60317-47:2014/A1:2024
(Amendment)Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 47: Flachdrähte aus Kupfer, lackisoliert mit aromatischen Polyimiden, Klasse 240
Spécifications pour types particuliers de fils de bobinage - Partie 47: Fil de section rectangulaire en cuivre émaillé avec polyimide aromatique, classe 240
Specifikacije za posebne vrste navijalnih žic - 47. del: Z aromatskim poliimidom emajlirana pravokotna bakrena žica, razred 240 - Dopolnilo A1 (IEC 60317-47:2013/AMD1:2024)
General Information
Relations
Overview
EN 60317-47:2014/A1:2024 (adopted from IEC 60317-47:2013/AMD1:2024) is a CLC/CENELEC amendment specifying requirements for aromatic polyimide enamelled rectangular copper wire, class 240. It updates the original Part 47 and aligns the product-specific requirements with the general requirements in IEC 60317-0-2:2020. This standard applies to enamelled rectangular copper winding wires used where high thermal endurance is required and sets test, dimensional and performance references for class 240 insulation systems.
Key Topics and Requirements
- Reference framework: Part 47 is to be used in conjunction with IEC 60317-0-2:2020, and where conflicts occur, EN/IEC 60317-47 takes precedence.
- Appearance and dimensions: Clauses on appearance and dimensions are replaced by the corresponding clauses in IEC 60317-0-2:2020.
- Mechanical and electrical properties: Electrical resistance, elongation, springiness, cut-through, resistance to solvents and other routine properties follow IEC 60317-0-2:2020 provisions.
- Flexibility and adherence: IEC 60317-0-2 applies, with the adherence test wire stretched by 10%.
- Heat shock: Minimum heat shock temperature specified as 260 °C.
- Breakdown voltage: Follows IEC 60317-0-2 procedures; the elevated temperature for breakdown tests is 240 °C.
- Temperature index: Minimum temperature index is 240, consistent with class 240 insulation.
- Resistance to transformer oil: Test considered inappropriate for this type and omitted.
- Packaging and other administrative clauses: Packaging follows Clause 30 of IEC 60317-0-2:2020.
- Normative references: Updated to reference IEC 60317-0-2:2020 and other related parts of the IEC 60317 series.
Applications and Who Uses It
- Manufacturers of enamelled rectangular copper wire use the standard to define product specifications, testing criteria and quality control for aromatic polyimide enamel systems.
- Motor, transformer and generator designers specify class 240 winding wire when high thermal endurance (up to 240 °C temperature index) and robust heat-shock resistance are required.
- Test laboratories and conformity assessors apply the referenced test methods and limits (heat shock 260 °C, breakdown test elevated temp 240 °C, adherence/stretch parameters).
- Procurement and specification engineers incorporate EN 60317-47:2014/A1:2024 in tender documents to ensure consistent material performance and compliance across suppliers.
Related Standards
- IEC 60317-0-2:2020 - Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire.
- Other parts of the IEC 60317 series covering different winding wire types and general testing procedures.
Keywords: aromatic polyimide enamelled rectangular copper wire, EN 60317-47:2014/A1:2024, IEC 60317-47, class 240, winding wires, temperature index 240, heat shock 260 °C.
Frequently Asked Questions
EN 60317-47:2014/A1:2024 is a amendment published by CLC. Its full title is "Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240". This standard covers: Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
EN 60317-47:2014/A1:2024 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60317-47:2014/A1:2024 has the following relationships with other standards: It is inter standard links to EN 60317-47:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 60317-47:2014/A1:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Specifikacije za posebne vrste navijalnih žic - 47. del: Z aromatskim poliimidom
emajlirana pravokotna bakrena žica, razred 240 - Dopolnilo A1 (IEC 60317-
47:2013/AMD1:2024)
Specifications for particular types of winding wires - Part 47: Aromatic polyimide
enamelled rectangular copper wire, class 240 (IEC 60317-47:2013/AMD1:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 47:
Flachdrähte aus Kupfer, lackisoliert mit aromatischen Polyimiden, Klasse 240 (IEC
60317-47:2013/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 47: Fil de section
rectangulaire en cuivre émaillé avec polyimide aromatique, classe 240 (IEC 60317-
47:2013/AMD1:2024)
Ta slovenski standard je istoveten z: EN 60317-47:2014/A1:2024
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60317-47:2014/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 47:
Aromatic polyimide enamelled rectangular copper wire, class
(IEC 60317-47:2013/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 47: Fil de section rectangulaire en cuivre émaillé Wickeldrähten - Teil 47: Flachdrähte aus Kupfer, lackisoliert
avec polyimide aromatique, classe 240 mit aromatischen Polyimiden, Klasse 240
(IEC 60317-47:2013/AMD1:2024) (IEC 60317-47:2013/AMD1:2024)
This amendment A1 modifies the European Standard EN 60317-47:2014; it was approved by CENELEC on 2024-07-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-47:2014/A1:2024 E
European foreword
The text of document 55/1994A/CDV, future IEC 60317-47/AMD1, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-
47:2014/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-47:2013/AMD1:2024 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Replace the references with:
Publication Year Title EN/HD Year
IEC 60317-0-2 2020 Specifications for particular types of EN IEC 60317-0-2 2020
winding wires - Part 0-2: General
requirements - Enamelled rectangular
copper wire
IEC 60317-47 ®
Edition 2.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –
Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
Spécifications pour types particuliers de fils de bobinage –
Partie 47: Fil de section rectangulaire en cuivre émaillé avec polyimide
aromatique, classe 240
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10 ISBN 978-2-8322-9055-2
– 2 – IEC 60317-47:2013/AMD1:2024
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES –
Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Spe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...