iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 2849:2014

(Main)

Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD

Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD

This European Standard specifies the properties of acrylonitrile-butadiene rubber (NBR), fuel and synthetic oil resistant, hardness 90 IRHD, for aerospace applications.

Luft- und Raumfahrt - Acrylinitril-Butadien-Elastomer (NBR) - Beständig gegen Brennstoffe und synthetische Öle - Härte 90 IRHD

Diese Europäische Norm legt die Eigenschaften von Acrylnitril-Butadien-Kautschuk (NBR)  ), beständig gegen Brennstoffe und synthetische Öle, Härte 90 IRHD, zur Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Élastomère acrylonitrile butadiène (NBR) - Résistant aux carburants et aux huiles synthétiques - Dureté 90 DIDC

Aeronavtika - Akrilonitril-butadien kavčuk (NBR) - Odporen proti gorivom in sintetičnim oljem - Trdota 90 IRHD

General Information

Status
Published
Publication Date
09-Jan-2014
ICS
49.025.40 - Rubber and plastics
Technical Committee
I13 - Imaginarni 13
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jan-2014
Due Date
10-Mar-2014
Completion Date
10-Jan-2014
Ref Project
EN 2849:2013 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD

Buy Standard

EN 2849:2014EN 2849:2014
PreviousNext
Standard
EN 2849:2014
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Acrylinitril-Butadien-Elastomer (NBR) - Beständig gegen Brennstoffe und synthetische Öle - Härte 90 IRHDSérie aérospatiale - Élastomère acrylonitrile butadiène (NBR) - Résistant aux carburants et aux huiles synthétiques - Dureté 90 DIDCAerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD49.025.40Guma in polimerni materialiRubber and plasticsICS:Ta slovenski standard je istoveten z:EN 2849:2013SIST EN 2849:2014en01-februar-2014SIST EN 2849:2014SLOVENSKI
STANDARD



SIST EN 2849:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2849
February 2013 ICS 49.025.40 English Version
Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD
Série aérospatiale - Élastomère acrylonitrile butadiène (NBR) - Résistant aux carburants et aux huiles synthétiques - Dureté 90 DIDC
Luft- und Raumfahrt - Acrylinitril-Butadien-Elastomer (NBR) - Beständig gegen Brennstoffe und synthetische Öle - Härte 90 IRHD This European Standard was approved by CEN on 3 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2849:2013: ESIST EN 2849:2014



EN 2849:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Application of the material . 4 3.1 General . 4 3.2 Typical use . 4 3.3 Temperature range . 4 4 Properties . 4 5 Designation . 6 6 Technical specification . 6
SIST EN 2849:2014



EN 2849:2013 (E) 3 Foreword This document (EN 2849:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 4708-201:2023(Main)
Aerospace series - Sleeves, heat-shrinkable, for binding, insulation and identification - Part 201: Polyolefin identification sleeves - Operating Temperature range -55 °C to 135 °C - Product standard
EN 4708-201:2022

This document specifies the required characteristics for heat-shrinkable polyolefin identification
sleeving for use in aircraft electrical systems at operating temperatures between −55 °C and 135 °C.
This specification is for the characterisation of identification sleeves only.
This sleeving is flexible and flame retarded, and is available with 2:1 and 3:1 shrink ratios.
The product is normally supplied with internal diameters up to 57 mm.
The standard colours are white or yellow.
Sizes or colours other than those specifically listed in this standard may be available. These items are
considered to comply with this document if they comply with the property requirements listed in tables 3
and 4 except for dimensions and mass.
As the sleeving to be tested is a printed article the complete system is to be recorded as part of the
evaluation. The sleeve will only be considered as meeting the requirements of this document if printed
with the printer, ribbon, inks, and settings referenced within the test report.
Mark adherence and print permanence are determined in this document using method EN 6059-407.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4708-203:2023(Main)
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 203: polyvinylidene fluoride (PVDF) Identification sleeves - Operating Temperature range -55ºC to 225ºC - Product Standard
EN 4708-203:2022

This document specifies the required characteristics for heat-shrinkable semi rigid polyvinylidene identification sleeves for use in aircraft electrical systems at operating temperatures between -55 °C and 225 °C.
This specification is for the characterisation of Identification sleeves only.
This sleeving is a semi rigid tough product and is suitable for use where high temperatures and extreme fluid resistance properties are required.
It is available with a shrink ratio of 2:1.
The product is normally supplied with internal diameters up to 38 mm
The standard colours are white, black or yellow
For use at temperatures above 200 °C black with white or silver ink is recommended
Sizes or colours other than those specifically listed in this standard may be available. These items shall be considered to comply with this document if they comply with the property requirements listed in tables 2 and 3 except for dimensions and mass.
As the sleeving to be tested is a printed article the complete system is to be recorded as part of the evaluation. The sleeve will only be considered as meeting the requirements of this specification if printed with the printer, ribbon/inks and settings referenced within the test report.
Mark adherence and print permanence are determined in this document using method EN 6059-407.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3656:2023(Main)
Aerospace series - Polycarbonate, self-extinguishing, low smoke emission - Characteristics
EN 3656:2022

This document specifies the characteristics of self-extinguishing and low smoke emission semi-finished polycarbonate sheets with and without UV radiation protection requirement, as used for aircraft equipment, such as internal panelling, simple internal glazing, sound-proofing panels, light covers, etc.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 2559:2023(Main)
Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
EN 2559:2022

This document specifies methods for determining the resin content, fibre content and mass of fibre per unit area of fibre preimpregnates for aerospace use.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4717:2022(Main)
Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification
EN 4717:2022

This document specifies the requirements of a thermoplastic composite stock shape material (e.g. tape,
rod, etc.) consisting of polyetheretherketone with 55 % continuous carbon fibres by volume (PEEK–
CF55) for aerospace applications, which is presupposed to be used in a further thermal moulding
process for forming parts described in EN 4714 1).

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4718:2022(Main)
Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification
EN 4718:2022

This document specifies the requirements of a thermoplastic composite stock shape material (e.g. tape,
rod etc.) consisting of polyetheretherketone with 55 % continuous glass fibres by volume (PEEK–GF55)
for aerospace applications, which is presupposed to be used in a further thermal moulding process for
forming parts described in EN 4714 1).

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 6111:2020(Main)
Aerospace series - Ethylene-propylene elastomer (EPM/EPDM) - Hardness 80 IRHD for static seal elements in hydraulic systems for long-term application - Material standard
EN 6111:2020

This document defines the requirements of ethylene propylene elastomer (EPM/EPDM) for seal elements for use as static seals in hydraulic systems using phosphate ester fluids, hardness 80 IRHD (International Rubber Hardness Degree) for long term application for aerospace application.
Unless otherwise specified in the drawing, order or inspection schedule, this document shall be used in conjunction with the referenced documents.
Applicable temperature range:
- Continuous service: −55 °C to 107 °C
- Intermittent service: −55 °C to 120 °C

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4840-102:2020(Main)
Aerospace series - Heat shrinkable moulded shapes - Part 102: Elastomeric, semi-rigid, temperature range -75 to 150 °C - Product Standard
EN 4840-102:2019

This European Standard specifies the required characteristics for heat-shrinkable elastomeric semi-rigid, boots for use in aircraft electrical systems at operating temperatures between -75 °C and 150 ° C. The moulded shapes may be supplied with a pre-coated adhesive. Refer to the manufacturers/suppliers for options. A guide to adhesive compatibility is given in Annex A (informative). These moulded shapes are normally supplied in the styles and dimensions given in EN 4840-002 Table 1 to Table 22. The colour is normally black. Styles and dimensions other than those specifically listed in EN 4840-002 Table 1 to Table 22 may be available as custom items. These items shall be considered to comply with this standard if they comply with the property requirements listed in Table 1 with the exception of dimensions.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4708-108:2019(Main)
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 108: Limited fire hazard sleeving - Operating temperatures - 65 °C to 150 °C - Product standard
EN 4708-108:2019

This standard specifies the required characteristics for four types of heat-shrinkable limited fire hazard sleevings for use in aircraft electrical systems at operating temperatures between - 65 °C and 150 °C. This sleeving is flexible, flame retarded and emits minimum smoke, gases and corrosive by-products when exposed to fire. It is available with various wall thicknesses and also in a higher shrink ratio according to the application and degree of mechanical protection required. It is suitable for use (e.g. as cable protection) in areas where smoke, gases or corrosive by-products would constitute a particular hazard. Type A: Medium wall, shrink ratio 2:1 and is normally supplied with internal diameters up to 30 mm. The standard colour is black. Sizes or colours other than those specifically listed in this document may be available. These items shall be considered to comply with this document if they comply with the property requirements listed in Table 2 except for dimensions and mass.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4708-107:2019(Main)
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 107: Polytetrafluoroethylene (PTFE) - Operating temperatures - 65 °C to 260 °C - Product standard
EN 4708-107:2019

This standard specifies the required characteristics for a heat-shrinkable, polytetrafluoroethylene sleeving for use in aircraft electrical systems at operating temperatures between ? 65 °C and 260 °C. This sleeving is basically translucent. It is semi-rigid, and suitable for use where resistance to chemicals and high temperature performance are required. It is flame resistant and available in low and high shrink ratios. Type A Low Shrink Ratio; Type B High Shrink Ratio .

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day