SIST EN 60893-3-4:2004/A1:2014

SLOVENSKI STANDARD
SIST EN 60893-3-4:2004/A1:2014
01-februar-2014
,]RODFLMVNLPDWHULDOL,QGXVWULMVNHWRJHODPLQLUDQHSORãþHL]VPROVWRSORWQLP
XWUMHYDQMHP]DHOHNWULþQHQDPHQHGHO6SHFLILNDFLMH]DSRVDPH]QHPDWHULDOH
=DKWHYH]DWRJHODPLQLUDQHSORãþHQDRVQRYLIHQROQLKVPRO'RSROQLOR$,(&
$
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for
electrical purposes - Part 3-4: Specifications for individual materials - Requirements for
rigid laminated sheets based on phenolic resins
Isolierstoffe - Tafeln aus technischen Schichtpressstoffen auf der Basis warmhärtender
Harze für elektrotechnische Zwecke - Teil 3-4: Bestimmungen für einzelne Werkstoffe -
Anforderungen für Tafeln aus Schichtpressstoffen auf der Basis von Phenolharzen
Matériaux isolants - Stratifiés industriels rigides en planches à base de résines
thermodurcissables à usages électriques - Partie 3-4: Spécification pour matériaux
particuliers - Prescriptions pour stratifiés rigides en planches à base de résine
phénolique
Ta slovenski standard je istoveten z: EN 60893-3-4:2004/A1:2012
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60893-3-4:2004/A1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60893-3-4:2004/A1:2014

---------------------- Page: 2 ----------------------

SIST EN 60893-3-4:2004/A1:2014

EUROPEAN STANDARD
EN 60893-3-4/A1

NORME EUROPÉENNE
December 2012
EUROPÄISCHE NORM

ICS 29.035.01


English version


Insulating materials -
Industrial rigid laminated sheets based on thermosetting resins
for electrical purposes -
Part 3-4: Specifications for individual materials -
Requirements for rigid laminated sheets based on phenolic resins
(IEC 60893-3-4:2003/A1:2012)


Matériaux isolants - Stratifiés industriels Isolierstoffe - Tafeln aus technischen
rigides en planches à base de résines Schichtpressstoffen auf der Basis
thermodurcissables à usages électriques - warmhärtender Harze für
Partie 3-4: Spécification pour matériaux elektrotechnische Zwecke -
particuliers - Prescriptions pour stratifiés Teil 3-4: Bestimmungen für einzelne
rigides en planches à base de résine Werkstoffe - Anforderungen für Tafeln
phénolique aus Schichtpressstoffen auf der Basis
(CEI 60893-3-4:2003/A1:2012) von Phenolharzen
(IEC 60893-3-4:2003/A1:2012)


This amendment A1 modifies the European Standard EN 60893-3-4:2004; it was approved by CENELEC on
2012-11-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60893-3-4:2004/A1:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60893-3-4:2004/A1:2014
EN 60893-3-4:2004/A1:2012 - 2 -
Foreword
The text of document 15/682/FDIS, future amendment 1 to edition 2 of IEC 60893-3-4, prepared by
IEC/TC 15 "Solid electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60893-3-4:2004/A1:2012.
The following dates are fixed:
(dop) 2013-08-16
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-11-16
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 60893-3-4:2003/A1:2012 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60893-3-4:2004/A1:2014



IEC 60893-3-4
...