SIST-TS ETSI/TS 102 110-1 V1.1.1:2005

SLOVENSKI STANDARD
01-januar-2005
Storitve in protokoli za napredna omrežja (SPAN) – Preskušanje integracije
omrežja univerzalnega mobilnega telekomunikacijskega sistema (UMTS) z
globalnim sistemom mobilnih komunikacij (GSM), faza 2+, ter javnega
komutiranega telefonskega omrežja (PSTN) z digitalnim omrežjem z integriranimi
storitvami (ISDN) – 1. del: Zgradba preskušalnega niza in namen preskušanja
(TSS&TP)
Services and Protocols for Advanced Networks (SPAN); Network integration testing of
Universal Mobile Telecommunications System (UMTS) with Global System for Mobile
Communication (GSM) Phase 2+, Public Switched Telephone Network (PTSN) and
Integrated Services Digital Network (ISDN); Part 1: Test Suite Structure and Test
Purposes (TSS&TP)
Ta slovenski standard je istoveten z: TS 102 110-1 Version 1.1.1
ICS:
33.040.35 Telefonska omrežja Telephone networks
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Technical Specification
Services and Protocols for Advanced Network (SPAN);
Network integration testing of
Universal Mobile Telecommunications System (UMTS)
with Global System for Mobile Communication (GSM)
Phase 2 +, Public Switched Telephone Network (PSTN)
and Integrated Services Digital Network (ISDN);
Part 1: Test Suite Structure and Test purposes (TSS&TP)

2 ETSI TS 102 110-1 V1.1.1 (2002-09)

Reference
DTS/SPAN-130305-1
Keywords
ISDN, UMTS, NIT, PTSN, TSS&TP, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16

Siret N∞ 348 623 562 00017 - NAF 742 C
Association ‡ but non lucratif enregistrÈe ‡ la
Sous-PrÈfecture de Grasse (06) N∞ 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2002.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI TS 102 110-1 V1.1.1 (2002-09)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .5
1 Scope .6
2 References .6
3 Definitions.10
3.1 Definitions related to conformance testing.10
3.2 Definitions related to test purpose descriptions.11
4 Abbreviations .12
5 Numbering Scheme .15
6 Test Suite Structure (TSS).18
6.1 ISDN to UMTS .18
6.2 UMTS to ISDN .19
6.3 PSTN to UMTS.20
6.4 UMTS to PSTN.21
6.5 GSM (Phase 2 +) - UMTS (UTRAN) .22
6.5.1 Support of circuit-switched call control services .22
6.5.2 Support of packet services .22
6.6 UMTS to GSM (Release 99) .23
6.6.1 Support of circuit-switched services.23
6.6.2 Support of packet services .23
6.7 UMTS to UMTS.24
6.7.1 Support of circuit-switched services.24
6.7.2 Support of packet services .24
7 Test purposes.25
7.1 Test purposes for ISDN to UMTS.25
7.1.1 Test purposes for ISDN to UMTS, Basic call.25
7.1.1.1 Successful.25
7.1.1.2 Unsuccessful .43
7.1.2 Test purposes for ISDN to UMTS Supplementary services .66
7.2 Test purposes for UMTS-ISDN.164
7.2.1 Test purposes for UMTS-ISDN, Basic call .164
7.2.1.1 Successful.164
7.2.1.2 Unsuccessful .192
7.2.2 Test purposes for UMTS-ISDN Supplementary services .204
7.3 Test purposes for PSTN to UMTS .301
7.3.1 Test purposes for PSTN to UMTS, Basic call .301
7.3.1.1 Successful.301
7.3.1.2 Unsuccessful .304
7.3.2 Test purposes for PSTN to UMTS, Supplementary_services .307
7.4 Test purposes for UMTS-PSTN .313
7.4.1 Test purposes for UMTS-PSTN, Basic call .313
7.4.1.1 Successful.313
7.4.1.2 Unsuccessful .327
7.4.2 Test purposes for UMTS-PSTN, Supplementary Services .333
7.5 Test purposes for GSM-UMTS .350
7.5.1 Test purposes for GSM-UMTS, Basic call .350
7.5.1.1 Successful.351
7.5.1.2 Unsuccessful .389
7.5.2 Test purposes for GSM-UMTS Supplementary services.406
7.5.3 Short message service.456
ETSI
4 ETSI TS 102 110-1 V1.1.1 (2002-09)
7.5.3.1 Short message service point to point on CS mode .456
7.5.3.2 Short message service point to point on PS mode.462
7.5.3.3 Short message service cell broadcast .463
7.6 Test purposes for UMTS-GSM .464
7.6.1 Test purposes for UMTS-GSM, Basic call .464
7.6.1.1 Successful.464
7.6.1.2 Unsuccessful .502
7.6.2 Test purposes for UMTS-GSM Supplementary services.519
7.6.3 Short message service.569
7.6.3.1 Short message service point to point on CS mode .569
7.6.3.2 Short message service point to point on PS mode.575
7.6.3.3 Short message service cell broadcast .576
7.7 Test purposes for UMTS-UMTS.577
7.7.1 Test purposes for UMTS-UMTS, Basic call.577
7.7.1.1 Successful.577
7.7.1.2 Unsuccessful .615
7.7.2 Test purposes for UMTS-UMTS Supplementary services .632
7.7.3 Short message service.682
7.7.3.1 Short message service point to point on CS mode .682
7.7.3.2 Short message service point to point on PS mode.688
7.7.3.3 Short message service cell broadcast .689
Annex A (informative): Bibliography.691
History .696

ETSI
5 ETSI TS 102 110-1 V1.1.1 (2002-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Services and Protocols for
Advanced Networks (SPAN).
The present document was developed by EURESCOM P1106 as Deliverable 2 Volume 2 and made freely and publicly
available to ETSI TC SPAN for publication.
The present document is part 1 of a multi-part deliverable covering the Network integration of UMTS with
GSM Phase 2 +, PSTN and ISDN as identified below:
Part 1: "Test Suite Structure and Test Purposes (TSS&TP)";
Part 2: "Abstract Test Suite (ATS), Implementation Conformance Statement (ICS) and partial Implementation
eXtra Information for Testing (IXIT) proformas".
Introduction
The present document contains the Test Suite Structure and Test Purposes (TSS&TP) for Network Integration Testing
for the European ISDN and PLMN, covering Network Integration Testing (NIT) between ISDN-UMTS, UMTS-PSTN,
UMTS-GSM, and UMTS-UMTS networks. The objective is to verify the level of international or national end-to-end
support of ISDN and PLMN services. All bearer services (and associated teleservices) and supplementary services are
checked for interworking capability and compatibility, in the European ISDN and PLMN.
ETSI
6 ETSI TS 102 110-1 V1.1.1 (2002-09)
1 Scope
The present document specifies of Test Suite Structure and Test Purposes (TSS&TP) for Network Integration Testing
(NIT) to verify the overall compatibility of UMTS, GSM, ISDN and non-ISDN (PSTN) over the national or
international ISUP between networks. Network Integration Testing will assure that the appropriate requested features
passes between an ISDN subscriber and the mobile subscriber across the national or international ISUP (ISUP V2)
interface.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[2] ETSI EN 300 267-1: "Integrated Services Digital Network (ISDN); Telephony 7 kHz,
videotelephony, audiographic conference and videoconference teleservices; Digital Subscriber
Signalling System No. one (DSS1) protocol; Part 1: Protocol specification".
[3] ETSI ETS 300 080: "Integrated Services Digital Network (ISDN); ISDN lower layer protocols for
telematic terminals".
[4] ETSI ETS 300 103: "Integrated Services Digital Network (ISDN); Support of CCITT
Recommendation X.21, X.21 bis and X.20 bis based Data Terminal Equipments (DTEs) by an
ISDN Synchronous and asynchronous terminal adaptation functions ".
[5] ETSI EN 300 092-1: "Integrated Services Digital Network (ISDN); Calling Line Identification
Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[6] ETSI ETS 300 092-1/A2: "Integrated Services Digital Network (ISDN);Calling Line Identification
Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol;Part 1: Protocol specification".
[7] ETSI EN 300 093-1: "Integrated Services Digital Network (ISDN); Calling Line Identification
Restriction (CLIR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[8] ETSI EN 300 097-1: "Integrated Services Digital Network (ISDN); Connected Line Identification
Presentation (COLP) supplementary service; Digital Subscriber Signalling System No. one
(DSS1) protocol; Part 1: Protocol specification".
[9] ETSI ETS 300 097-1/A1: "Integrated Services Digital Network (ISDN); Connected Line
Identification Presentation (COLP) supplementary service; Digital Subscriber Signalling System
No. one (DSS1) protocol; Part 1: Protocol specification".
[10] ETSI EN 300 098-1: "Integrated Services Digital Network (ISDN); Connected Line Identification
Restriction (COLR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
ETSI
7 ETSI TS 102 110-1 V1.1.1 (2002-09)
[11] ETSI EN 300 138-1: "Integrated Services Digital Network (ISDN); Closed User Group (CUG)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[12] ETSI EN 300 061-1: "Integrated Services Digital Network (ISDN); Subaddressing (SUB)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[13] ETSI EN 300 055-1: "Integrated Services Digital Network (ISDN); Terminal Portability (TP)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[14] ETSI EN 300 286-1: "Integrated Services Digital Network (ISDN); User-to-User Signalling
(UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[15] ETSI EN 300 185-1: "Integrated Services Digital Network (ISDN); Conference call, add-on
(CONF) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[16] ETSI EN 300 207-1: "Integrated Services Digital Network (ISDN); Diversion supplementary
services; Digital Subscriber Signalling System No. One (DSS1); Part 1: Protocol specification".
[17] ETSI EN 300 130-1: "Integrated Services Digital Network (ISDN); Malicious Call Identification
(MCID) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[18] ETSI EN 300 188-1: "Integrated Services Digital Network (ISDN); Three-Party (3PTY)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[19] ETSI EN 300 141-1: "Integrated Services Digital Network (ISDN); Call Hold (HOLD)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[20] ETSI EN 300 058-1: "Integrated Services Digital Network (ISDN); Call Waiting (CW)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[21] ETSI EN 300 356-15: "Integrated Services Digital Network (ISDN); Signalling System
No.7 (SS7); ISDN User Part (ISUP) version 4 for the international interface; Part 15: Diversion
supplementary service [ITU-T Recommendation Q.732, clauses 2 to 5 (1999) modified]".
[22] ETSI EN 300 359-1: "Integrated Services Digital Network (ISDN); Completion of Calls to Busy
Subscriber (CCBS) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[23] ETSI EN 300 369-1: "Integrated Services Digital Network (ISDN); Explicit Call Transfer (ECT)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[24] ITU-T Recommendation E.164:" The international public telecommunication numbering plan".
[25] ISO/IEC 9646-1: "Information Technology-Open Systems Interconnection- Conformance testing
methodology and framework, Part 1: General Concepts".
[26] ETSI TS 100 548 (GSM 03.88): "Digital cellular telecommunications system (Phase 2+) (GSM);
Call Barring (CB) supplementary services - Stage 2 (GSM 03.88 Release 1998)".
[27] ITU-T Recommendation Q.699: "Interworking between the digital Subscriber Signalling System
Layer 3 protocol and the Signalling System No.7 ISDN User part".
[28] ITU-T Recommendation Q.764: "Signalling System No. 7-ISDN User Part signalling procedures".
ETSI
8 ETSI TS 102 110-1 V1.1.1 (2002-09)
[29] ETSI TS 122 082: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Call Forwarding (CF) Supplementary Services; Stage 1
(3GPP TS 22.082 Release 5)".
[30] ETSI TS 122 084: "Digital cellular telecommunications system (Phase 2 +); Universal Mobile
Telecommunications System (UMTS); MultiParty (MPTY) supplementary service; Stage 1
(3GPP TS 22.084 Release 5)".
[31] ETSI TS 122 085: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Closed User Group (CUG) supplementary services; Stage 1
(3GPP TS 22.085 Release 5)".
[32] ETSI TS 123 034: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); High Speed Circuit Switched Data (HSCSD); Stage 2
(3GPP TS 23.034 Release 5)".
[33] ETSI TS 123 081: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Line Identification supplementary services; Stage 2
(3GPP TS 23.081 Release 5)".
[34] ETSI TS 123 082: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Call Forwarding (CF) Supplementary Services; Stage 2
(3GPP TS 23.082 Release 5)".
[35] ETSI TS 123 083: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Call Waiting (CW) and Call Hold (HOLD) Supplementary
Service; Stage 2 (3GPP TS 23.083 Release 5)".
[36] ETSI TS 123 084: "Digital cellular telecommunications system (Phase 2+) (GSM); Universal
Mobile Telecommunications System (UMTS); MultiParty (MPTY) Supplementary Service;
Stage 2 (3GPP TS 23.084 Release 5)".
[37] ETSI TS 123 085: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Closed User Group (CUG) Supplementary Service; Stage 2
(3GPP TS 23.085 Release 5)".
[38] ETSI TS 123 087: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); User-to-User Signalling (UUS) supplementary service;
Stage 2 (3GPP TS 23.087 Release 5)".
[39] ETSI TS 123 088: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Call Barring (CB) Supplementary Service; Stage 2
(3GPP TS 23.088 Release 5)".
[40] ETSI TS 124 008: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Mobile radio interface Layer 3 specification; Core network
protocols; Stage 3 (3GPP TS 24.008 Release 5)".
[41] ETSI TS 124 011: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Point-to-Point (PP) Short Message Service (SMS) Support
on Mobile Radio Interface (3GPP TS 24.011 Release 5)".
[42] ETSI TS 124 081: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Line Identification Supplementary Service; Stage 3
(3GPP TS 24.081 Release 5)".
[43] ETSI TS 124 082: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Call Forwarding supplementary service; Stage 3
(3GPP TS 24.082 Release 5)".
[44] ETSI TS 124 083: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Call Waiting (CW) and Call Hold (HOLD) Supplementary
Service; Stage 3 (3GPP TS 24.083 Release 5)".
ETSI
9 ETSI TS 102 110-1 V1.1.1 (2002-09)
[45] ETSI TS 124 085: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Closed User Group (CUG) Supplementary Service; Stage 3
(3GPP TS 24.085 Release 5)".
[46] ETSI TS 124 087: "Digital cellular telecommunications system (Phase 2 +); Universal Mobile
Telecommunications System (UMTS); User-to-User Signalling (UUS); Stage 3 (3GPP TS 24.087
Release 5)".
[47] ETSI TS 124 093: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Call Completion to Busy Subscriber (CCBS); Stage 3
(3GPP TS 24.093 Release 5)".
[48] ETSI TS 129 007: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); General requirements on interworking between the Public
Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public
Switched Telephone Network (PSTN) (3GPP TS 29.007 Release 5)".
[49] ETSI TS 127 001: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); General on Terminal Adaptation Functions (TAF) for
Mobile Stations (MS) (3GPP TS 27.001 Release 5)".
[50] ETSI TS 129 002: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Mobile Application Part (MAP) specification
(3GPP TS 29.002 Release 5)".
[51] ETSI EN 300 646-1: "Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);
Digital cellular telecommunications system (Phase 2); Application of ISDN User Part (ISUP)
version 2 for the ISDN-Public Land Mobile Network (PLMN) signalling interface; Part 1:
Protocol specification (GSM 09.12)".
[52] ETSI TS 122 086: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Advice of Charge (AoC) supplementary services; Stage 1
(3GPP TS 22.086 Release 5)".
[53] ETSI TS 122 003: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); Circuit Teleservices supported by a Public Land Mobile
Network (PLMN) (3GPP TS 22.003 Release 5)".
[54] ETSI ETS 300 604: "Digital cellular telecommunications system (Phase 2) (GSM); General
requirements on interworking between the Public Land Mobile Network (PLMN) and the
Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)
(GSM 09.07)".
[55] ETSI EN 300 001: "Attachments to the Public Switched Telephone Network (PSTN); General
technical requirements for equipment connected to an analogue subscriber interface in the PSTN".
[56] ETSI ETS 300 648: "Public Switched Telephone Network (PSTN); Calling Line Identification
Presentation (CLIP) supplementary service; Service description".
[57] ETSI EN 300 659: "Access and Terminals (AT); Analogue access to the Public Switched
Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related)
services".
[58] ITU-T Recommendation Q 735: "Stage 3 description for community of interest supplementary
services using Signalling System No. 7".
[59] ETSI TBR 008: "Integrated Services Digital Network (ISDN); Telephony 3,1 kHz teleservice;
Attachment requirements for handset terminals".
[60] ETSI EG 201 018: "Integrated Services Digital Network (ISDN); Application of the Bearer
Capability (BC), High Layer Compatibility (HLC) and Low Layer Compatibility (LLC)
information elements by terminals supporting ISDN services".
[61] ETSI ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-network interface layer
3; Specifications for basic call control".
ETSI
10 ETSI TS 102 110-1 V1.1.1 (2002-09)
[62] ETSI ETS 300 511: "European digital cellular telecommunications system (Phase 2);
Man-Machine Interface (MMI) of the Mobile Station (MS) (GSM 02.30)".
[63] ETSI ETS 300 649: "Public Switched Telephone Network (PSTN); Calling Line Identification
Restriction (CLIR) supplementary service; Service description".
[64] ETSI ETR 018: "Integrated Services Digital Network (ISDN); Application of the Bearer
Capability (BC), High Layer Compatibility (HLC) and Low Layer Compatibility (LLC)
information elements by terminals supporting ISDN services".
[65] ITU-T Recommendation E.163: "Numbering plan for the international telephone service".
[66] ETSI ETS 300 577: "Digital cellular telecommunications system (Phase 2) (GSM); Radio
transmission and reception (GSM 05.05)".
[67] ETSI EN 302 646-1: "Integrated Services Digital Network (ISDN); Signalling System No.7;
Digital cellular telecommunications system (Phase 2+); Application of ISDN User Part (ISUP)
version 3 for the ISDN-Public Land Mobile Network (PLMN) signalling interface;
Part 1: Protocol specification (GSM 09.14 Release 1998)".
[68] ETSI ETS 300 196: "Integrated Services Digital Network (ISDN); Generic functional protocol for
the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)
protocol".
[69] ITU-T Recommendation Q.734.1: "Stage 3 description for multiparty supplementary services
using Signalling System No. 7: Conference calling".
[70] ETSI EN 300 065-1: "ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);
Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational
information (NAVTEX); Part 1: Technical characteristics and methods of measurement".
[71] ETSI EN 300 646: "Integrated Services Digital Network (ISDN); Signalling System No.7;
signalling interface".
[72] ETSI EN 300 065: "ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);
Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational
information (NAVTEX)".
3 Definitions
3.1 Definitions related to conformance testing
For the purposes of the present document, the following terms and definitions apply:
Abstract Test Case (ATC): Refer to ISO/IEC 9646-1 [25].
Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 [25].
Implementation Conformance Statement (ICS) proforma: Refer to ISO/IEC 9646-1 [25].
Implementation eXtra Information for Testing (IXIT) proforma: Refer to ISO/IEC 9646-1 [25].
Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [25].
lower tester: Refer to ISO/IEC 9646-1 [25].
point of control and observation: Refer to ISO/IEC 9646-1 [25].
Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 [25].
Protocol Implementation eXtra Information for Testing (PIXIT): Refer to ISO/IEC 9646-1 [25].
System Under Test (SUT): Refer to ISO/IEC 9646-1 [25].
ETSI
11 ETSI TS 102 110-1 V1.1.1 (2002-09)
test purpose: Refer to ISO/IEC 9646-1 [25].
3.2 Definitions related to test purpose descriptions
For the purposes of the present document, the following terms and definitions apply:
Alternate speech and facsimile group 3 (TS 61): tteleservice which allows the connection of ITUgroup 3 fax
apparatus (send and/or receive) to the mobile stations of a GSM PLMN
NOTE: Facsimile connections may be established to/from group 3 apparatus in the PSTN, ISDN or GSM PLMN.
Alternate Speech/Data: provides the capability to swap between speech and data during a call
NOTE 1: If either the speech or data portion of the call requires a full rate channel, a full rate channel shall be used
for the duration of the call.
NOTE 2: The access interface at the mobile station for the data portion is assumed to be a standard data interface.
Some means must be provided to select the speech/data capability.
Automatic Facs. group 3 (TS 62): teleservice which allows connection of ITUgroup 3 fax apparatus to and from the
mobile stations of a GSM PLMN
NOTE: Facsimile connections may be established to and from group 3 apparatus in the PSTN, ISDN or GSM
PLMN.
BC=speech: Bearer Capability information element with its information transfer capability field set to "speech" and its
user information layer one protocol field set to "G.711 A-law"
BC=3,1 kHz audio: Bearer Capability information element with its information transfer capability field set to "3,1 kHz
Audio" and its user information layer one protocol field set to "G.711 A-law"
BC=UDI: Bearer Capability information element with its information transfer capability set to "unrestricted digital
information"
BC=UDI/TA: Bearer Capability information element with its information transfer capability set to "unrestricted digital
information with tones/announcements" and its user information layer one protocol field set to "Recommendations
H.221 and H.242"
BC=V110/X30: Bearer Capability information element with its information transfer capability set to "unrestricted
digital information" and its user information layer 1 field set to "ITUstandardized rate adaption V.110/X.30", including
sync/async and user rate values
CF active: Call Forwarding (U, B or NR) supplementary service already activated with the address of user C
CUG default request: the Calling User does not include in the outgoing SETUP message a explicit request for the
CUG supplementary service
GSM-BC=3,1kHz (External to the PLMN): used to select a "3,1 kHz audio" interworking function at the MSC
NOTE 1: This service category is used when interworking with the ISDN or PSTN "3,1 kHz audio" service and
includes the capability to select a modem at the interworking function.
NOTE 2: "External to the PLMN" indicates that the "3,1 kHz audio" service is only used outside of the PLMN, in
the ISDN/PSTN. The connection within the PLMN, user access point to the interworking function, is an
unrestricted digital connection.
GSM-BC=Speech (TS 11): service which provides the transmission of speech information and audible signalling tones
of the PSTN/ISDN
NOTE: In the GSM PLMN and the fixed network processing technique appropriate for speech such as analogue
transmission, echo cancellation and low bit rate voice encoding may be used.
GSM-BC=UD: Unrestricted Digital Information (UDI) which provides the transfer of unrestricted digital information
ETSI
12 ETSI TS 102 110-1 V1.1.1 (2002-09)
GSM-Bearer service categories: all bearer service categories provide information transfer between R/S reference
points and allow the use of sub-rate information streams which are rate adapted
GSM teleservices: teleservices supported by a GSM PLMN described by a number of attributes which are intended to
be largely independent
NOTE: They are grouped into five categories: - High layer attributes-Low layer attributes (describing the Bearer
capabilities which support the Teleservice). - information transfer attributes, - access attributes. - General
attributes
HLC = Facsimile G2/G3: High Layer Compatibility information element with its high layer characteristics
identification field set to "facsimile group 2/3 (Rec. F.182)"
HLC = facsimile group 4: High Layer Compatibility information element with its high layer characteristics
identification field set to "facsimile group 4 class 1"
HLC = telephony: High Layer Compatibility information element with its high layer characteristics identification field
set to "telephony"
HLC = telex: High Layer Compatibility information element with its high layer characteristics identification field set to
"telex"
HLC = videotelephony_ic: High Layer Compatibility information element with its high layer characteristics
identification field set to "videotelephony" and its extended audiovisual characteristics field set to "capability set of
initial channel of Rec. H.221"
NOTE: See ITU-T Recommendation F.721.
LLC = telematic_term: Low Layer Compatibility information element with its user information layer 2 field
indicating "ISO/IEC 7776 DTE-DTE operation" and user information layer 3 field indicating "ISO/IEC 8208"
LLC = V110/X30: Low Layer Compatibility information element with its user information layer 1 field indicating
"ITUstandardized rate adaption V.110/X.30" and including sync/async and user rate values
LLC = voice band data via modem: Low Layer Compatibility information element with its user information layer 1
field indicating a "modem type" coding
speech followed by data: provides a speech connection first and then at some time while the call is in progress, the
user can switch to a data connection
NOTE: The user cannot switch back to speech after the data portion. If either the speech or data portion of the call
requires a full rate channel, a full rate channel shall be used from the start of the call. The network may
then change to a half rate channel for the data portion.
UI length = 32: length of the User Information field of the User-user information element, which is 35 octets
4 Abbreviations
For the purpose of the present document the following abbreviations apply:
ATS Abstract Test Suite
3PTY Three-ParTY conference
AIN Advanced Intelligent Network
AMPS Advanced Mobile Phone Service
ANSI American National Standards Institute
BC Bearer Capability information element
BNF Backus-Naur Form
BS  Base Station
BSC Base Station Controller
BSG Basic Service Group
BSS Base Station Sub-system
BSS Base Station System
BSSMAP BSSMAnagement Part
ETSI
13 ETSI TS 102 110-1 V1.1.1 (2002-09)
BTS Base Transceiver Station
CAMEL Customized Applications for Mobile network Enhanced Logic
CD Call Deflection
CDMA  Code Division Multiple Access
CFB Call Forwarding Busy
CFNR Call Forwarding No Response
CFNRc Call Forwarding on mobile subscriber Not Reachable
CFNRy Call Forwarding on No ReplY
CFU Call Forwarding Unconditional
CI CUG Index
CLIP Calling Line Identification Presentation
CLIR Calling Line Identification Restriction
CN Core Network
COLP COnnected Line identification Presentation
COLR COnnected Line identification Restriction
CONF CONFerence (add-on)
CS1 Capability Set-1
CUG Closed User Group
CW Call Waiting
DECT Digital Enhanced Cordless Telecommunications
DHCP Dynamic Host Configuration Protocol
DTAP Direct Transfer Application Part
ECT Explicit Call Transfer
ESR Eroded Seconds Ratio
FE Functional Entity
FPH FreePHone service
FPLMTS Future Public Land Mobile Telecommunication Systems
FTAM File Transfer Access & Management
GGSN Serving GPRS Support Node
GII  Global Information Infrastructure
GK GateKeeper
GMSC Gateway MSC
GSM Global System for Mobile communication
GW GateWay
H/V-PLMN Home/Visited PLMN
HLC High Layer Compatibility information element
HLR Home Location Register
HPLMN Home Public Land Mobile Network
IA Incoming Access
ICB Incoming Calls Barred within a CUG
IMSI International Mobile Subscriber Identity
IMT-2000 International Mobile Telecommunications ñ 2000
IMUI International Mobile User Identity
IN Intelligent Network
INAP Intelligent Network Application Part
IP Internet Protocol
IPCP IP Control Protocol
ISDN Integrated Services Digital Network
ISUP ISDN User Part
IUT Implementation Under Test
IWF InterWorking Function
IWMSC InterWorking Mobile Switching Centre
LAN Locale Access Network
LLC Low Layer Compatibility information element
MAP Mobile Application Part
MCID Malicious Call IDentification
MCU Multipoint Control Unit
MD-BS Mobile Data Base Station
MD-IS Mobile Data Intermediate System
M-ES Mobile End System
MexE Mobile station (application) execution Environment
MGK Mediation GateKeeper
ETSI
14 ETSI TS 102 110-1 V1.1.1 (2002-09)
MIN Mobile Identification Number
M-INAP CAMEL Application Part = IN CS-1 Core INAP for CAMEL
MMC Mobile to Mobile Call
MOC Mobile Originated Call
MPLMN PLMN responsible for the Management of a CUG spanning over several PLMNs
MS Mobile Station
MS Mobile Subscriber
MSC Mobile Switching Center
MSISDN Mobile Station ISDN number
MSRN Mobile Station Roaming Number
MT Mobile Terminal
MT Mobile Terminated
MTC Mobile Terminated Call
MTP Message Transfer Part
NAMPS Narrowband Advanced Mobile Phone Service
NIT Network Integration Testing
NNI Network to Network Interface
NPA  Numberi
...