iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50144-2-1:2000

(Main)

Safety of hand-held electric motor operated tools -- Part 2-1: Particular requirements for drills

Safety of hand-held electric motor operated tools -- Part 2-1: Particular requirements for drills

This clause of Part 1 is applicable execpt as follows: 1.1. Addition: This European Standard applies to drills and impact drills. Stands for use with drills are not covered by this standard. This standard does not give requirements for the design of the tool to reduce the risks arising from noise and vibration

Sicherheit handgeführter motorbetriebenen Elektrowerkzeugen -- Teil 2-1: Besondere Anforderungen an Bohrmaschinen

Sécurité des outils électroportatifs à moteur -- Partie 2-1: Règles particulières pour les perceuses

Safety of hand-held electric motor operated tools - Part 2-1: Particular requirements for drills

General Information

Status
Withdrawn
Publication Date
31-Aug-2000
Withdrawal Date
30-Jun-2006
ICS
25.080.40 - Drilling machines
25.140.20 - Electric tools
Technical Committee
VGA - Safety of household and similar electrical appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jul-2006
Due Date
01-Jul-2006
Completion Date
01-Jul-2006
Directive
98/37/EC - Machinery
Mandate
M/083 - Machinery
Ref Project
EN 50144-2-1:1999 - Safety of hand-held electric motor operated tools - Part 2-1: Particular requirements for drills

Relations

Replaced By
SIST EN 60745-2-1:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-1: Particular requirements for drills and impact drills
Effective Date
29-Jan-2023

Buy Standard

EN 50144-2-1:2000EN 50144-2-1:2000
PreviousNext
Standard
EN 50144-2-1:2000
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50144-2-1:2000
01-september-2000
1DGRPHãþD
SIST EN 50144-2-1:1999
Safety of hand-held electric motor operated tools - Part 2-1: Particular
requirements for drills
Safety of hand-held electric motor operated tools -- Part 2-1: Particular requirements for
drills
Sicherheit handgeführter motorbetriebenen Elektrowerkzeugen -- Teil 2-1: Besondere
Anforderungen an Bohrmaschinen
Sécurité des outils électroportatifs à moteur -- Partie 2-1: Règles particulières pour les
perceuses
Ta slovenski standard je istoveten z: EN 50144-2-1:1999
ICS:
25.080.40 Vrtalniki Drilling machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 50144-2-1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50144-2-1:2000

---------------------- Page: 2 ----------------------

SIST EN 50144-2-1:2000

---------------------- Page: 3 ---------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 62841-2-1:2018/A1:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A1:2022

DOW=DOR+48 months

  • Amendment
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-1:2018/A12:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A12:2022

This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-6:2014/A1:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system
EN 62841-3-6:2014/A1:2022

2020-12-14: Common mods to this EN IEC are included in prAA (PR=73229) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-6:2014/A12:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system
EN 62841-3-6:2014/A12:2022

2020-12-14: This prAA represents common mods to EN IEC (PR=73190) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-1:2018/A11:2019(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A11:2019

IEC 62841-2-1:2017 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3.
This standard does not apply to rotary hammers, even if they can be used as a drill.
This Part 2-1 is to be used in conjunction with the first edition of IEC 62841-1:2014.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication
Key words: Drill, Impact Drill, Hand-held tool, Safety

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-1:2018(Main)
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017)
EN 62841-2-1:2018

IEC 62841-2-1:2017 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3.
This standard does not apply to rotary hammers, even if they can be used as a drill.
This Part 2-1 is to be used in conjunction with the first edition of IEC 62841-1:2014.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication
Key words: Drill, Impact Drill, Hand-held tool, Safety

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-1:2018/A1:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A1:2022

DOW=DOR+48 months

  • Amendment
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-1:2018/A12:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A12:2022

This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-6:2014/A1:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system
EN 62841-3-6:2014/A1:2022

2020-12-14: Common mods to this EN IEC are included in prAA (PR=73229) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-6:2014/A12:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system
EN 62841-3-6:2014/A12:2022

2020-12-14: This prAA represents common mods to EN IEC (PR=73190) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day