iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 10417:2005

(Main)

Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004)

Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004)

ISO 10417:2004 establishes requirements and provides guidelines for configuration, installation, test, operation and documentation of subsurface safety valve (SSSV) systems. In addition, ISO 10417:2004 establishes requirements and provides guidelines for selection, handling, redress and documentation of SSSV downhole production equipment.
ISO 10417:2004 is not applicable to repair activities. ISO 10432 provides requirements for SSSV equipment repair.

Erdöl- und Erdgasindustrie - Undertage-Sicherheitsventil-Systeme - Auslegung, Einbau, Betrieb und Instandsetzung (ISO 10417:2004)

Diese Internationale Norm legt Anforderungen fest und enthält Empfehlungen für Auslegung, Einbau, Prüfung, Betrieb und Dokumentation von Untertage-Sicherheitsventilsystemen. Darüber hinaus enthält diese Internationale Norm Anforderungen und Empfehlungen für Auswahl, Handhabung, Instandsetzung und Dokumentation von Untertage-Sicherheitsventilen in Bohrloch-Produktionsausrüstungen.
Reparaturen fallen nicht in den Anwendungsbereich dieser Internationalen Norm. Anforderungen an die Reparatur von SSSV-Ausrüstungen sind in der Internationalen Norm ISO 10432 enthalten.

Industries du pétrole et du gaz naturel - Systemes de vannes de sécurité de fond de puits - Conception, installation, fonctionnement et rectification (ISO 10417:2004)

L'ISO 10417:2004 établit les exigences et fournit des lignes directrices relatives à la configuration, à l'installation, à l'essai, au fonctionnement et à la documentation des systèmes de vannes de sécurité de fond (SSSV). En outre, l'ISO 10417:2004 établit les exigences et fournit des lignes directrices relatives au choix, à la manutention, à la remise en état et à la documentation des vannes de sécurité de fond pour la production.
L'ISO 10417:2004 ne s'applique pas aux activités de réparation.

Industrija za predelavo nafte in zemeljskega plina - Podzemni sistem varnostnih ventilov – Načrtovanje, vgradnja, delovanje in popravila (ISO 10417:2004)

General Information

Status
Published
Publication Date
31-Dec-2004
ICS
75.180.10 - Exploratory, drilling and extraction equipment
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2005
Due Date
01-Jan-2005
Completion Date
01-Jan-2005
Ref Project
EN ISO 10417:2004 - Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004)

Buy Standard

EN ISO 10417:2005EN ISO 10417:2005
PreviousNext
Standard
EN ISO 10417:2005
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Related Packages

Energy and petroleum - Drilling - ISO Standards
Energy and petroleum - Drilling - ISO Standards
48 documents

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10417:2005
01-januar-2005
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD3RG]HPQLVLVWHPYDUQRVWQLK
YHQWLORY±1DþUWRYDQMHYJUDGQMDGHORYDQMHLQSRSUDYLOD ,62
Petroleum and natural gas industries - Subsurface safety valve systems - Design,
installation, operation and redress (ISO 10417:2004)
Erdöl- und Erdgasindustrie - Undertage-Sicherheitsventil-Systeme - Auslegung, Einbau,
Betrieb und Instandsetzung (ISO 10417:2004)
Industries du pétrole et du gaz naturel - Systemes de vannes de sécurité de fond de
puits - Conception, installation, fonctionnement et rectification (ISO 10417:2004)
Ta slovenski standard je istoveten z: EN ISO 10417:2004
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
SIST EN ISO 10417:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 3 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 4 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 5 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 6 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 7 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 8 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 9 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 10 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 11 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 12 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 13 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 14 ----------------------

SIST EN ISO 10417:2005

---------------------- Page: 15 ----------------------

SIST EN ISO 10
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 15136-2:2007(Main)
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006)
EN ISO 15136-2:2006

This part of ISO 15136 provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings and repair of progressing cavity pump surface-drive systems for use in the petroleum and natural gas industry. This part of ISO 15136 is applicable to those products meeting the definition of surface-drive systems. Additionally, informative annexes provide information on brake system selection, installation, and operation; and sucker rod selection and use. Equipment not covered by this part of ISO 15136, unless integral by design, includes bottom drive systems, sucker rods, polished rod clamps, stuffing boxes, electrical controls, instrumentation, external power transmission devices, auxiliary equipment, such as belts, sheaves and equipment guards. These items might or might not be covered by other International Standards.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13533:2004/AC:2007(Amendment)
Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001/Cor.1:2005)
EN ISO 13533:2001/AC:2006

ISO - Taking over of ISO Technical Corrigendum

  • Corrigendum
    5 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13628-10:2007(Main)
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
EN ISO 13628-10:2006

This part of ISO 13628 defines the technical requirements for safe, dimensionally and functionally interchangeable bonded flexible pipes that are designed and manufactured to uniform standards and criteria. See Figure 1 for explanatory figure on typical bonded flexible pipe. Minimum requirements are specified for the design, material selection, manufacture, testing, marking and packaging of bonded flexible pipes, with reference to existing codes and standards where applicable. See API RP 17B for guidelines on the use of flexible pipes and ancillary components.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10432:2005(Main)
Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)
EN ISO 10432:2004

ISO 10432:2004 provides the minimum acceptable requirements for subsurface safety valves (SSSVs). It covers subsurface safety valves including all components that establish tolerances and/or clearances which may affect performance or interchangeability of the SSSVs. It includes repair operations and the interface connections to the flow control or other equipment, but does not cover the connections to the well conduit.
Redress activities are beyond the scope of ISO 10432:2004.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10426-4:2005(Main)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO 10426-4:2004)
EN ISO 10426-4:2004

ISO 10426-4:2004 defines the methods for the generation and testing of foamed cement slurries and their corresponding unfoamed base cement slurries at atmospheric pressure.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17078-1:2005(Main)
Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels (ISO 17078-1:2004)
EN ISO 17078-1:2004

ISO 17078:2004 provides requirements for side-pocket mandrels used in the petroleum and natural gas industry. This part of ISO 17078 includes specifying, selecting, designing, manufacturing, quality control, testing, and preparation for shipping of side-pocket mandrels.
This part of ISO 17078:2004 does not address nor include requirements for end connections between the side-pocket mandrels and the well conduit. The installation and retrieval of side-pocket mandrels is outside the scope of this part of ISO 17078:2004. Additionally, this part of ISO 17078:2004 does not include specifications for centre-set mandrels, or mandrels that employ or support tubing-retrievable flow control devices.
This part of ISO 17078:2004 does not include gas-lift or any other flow-control valves or devices, latches, and/or associated wire line equipment that can or cannot be covered in other ISO specifications.
The side-pocket mandrels to which this part of ISO 17078:2004 refers are independent devices that can accept installation of flow-control or other devices down-hole.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10424-1:2005(Main)
Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004)
EN ISO 10424-1:2004

ISO 10424-1:2004 specifies requirements for the following drill stem elements: upper and lower kelly valves; square and hexagonal kellys; drill stem subs; standard steel and non-magnetic drill collars; drilling and coring bits.
ISO 10424-1:2004 is not applicable to drill pipe and tool joints, rotary shouldered connection designs, thread gauging practice, or grand master, reference master and working gauges.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13703:2001(Main)
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000)
EN ISO 13703:2000

Recommends minimum requirements and gives guidance for the design and installation of new piping systems on production platforms located offshore for the petroleum and natural gas industries. It covers piping systems up to 690 bar g maximum within a temperature range of -29°C to 343°C.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13534:2001(Main)
Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000)
EN ISO 13534:2000

La présente Norme internationale donne des lignes directrices et établit les exigences relatives au contrôle, à la maintenance, à la réparation et au reconditionnement des éléments des équipements de levage afin de maintenir ce type d'équipement en état de fonctionnement.  Les éléments des équipements de levage pour le forage et la production traités par la présente Norme internationale sont les suivants :  - poulies et paliers de moufle fixe  - moufle mobile et moufle-crochet  - adaptateurs entre moufle et crochet  - raccords et adaptateurs de bras d'élévateurs  - crochets de forage   - crochets pour tubes de production et tiges de pompage  - bras élévateur   - élévateurs de tubage, élévateurs de tube de production, élévateurs de tige de forage et élévateurs de masse-tige  - élévateurs de tige de pompage   - adaptateurs d'anse de tête d'injection rotary  - têtes d'injection rotary  - têtes d'entraînement   - raccords d'entraînement  - dispositifs de retenue à coins lorsqu'ils peuvent être utilisés comme élévateurs  - points d'attache du brin mort/réa   - compensateurs de pilonnement pour tiges de forage  - dispositif de vissage lorsqu'il peut être utilisé comme équipement de levage  - composants de l'outil de pose du tube prolongateur (riser) lorsqu'ils peuvent être utilisés comme équipement de levage  - composants de l'outil de pose de la tête de puits lorsqu'ils peuvent être utilisés comme équipement de levage  - colliers de sécurité lorsqu'ils peuvent être utilisés comme équipement de levage.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13628-3:2001(Main)
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000)
EN ISO 13628-3:2000

La présente partie de l'ISO 13628 définit des exigences et donne des recommandations pour la conception, la fabrication et la mise en oeuvre des équipements et systèmes d'injection TFL.  Les modes opératoires et exigences présentés concernent les équipements de fond à fonctionnement hydraulique, les têtes de puits sous-marines et les suspensions de tube de production ainsi que les lignes de service et les équipements associés.  La présente partie de l'ISO 13628 concerne essentiellement les systèmes d'injection TFL pour les applications en mer et sous-marines mais peut également être utilisée pour d'autres applications telles que les puits fortement déviés ou les puits horizontaux.  La séparation en fond de mer, la surpression, le comptage et les pompes de fond ne sont pas compris dans le domaine d'application de la présente partie de l'ISO 13628.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day