SIST EN 62561-5:2011

SLOVENSKI STANDARD
SIST EN 62561-5:2011
01-oktober-2011
1DGRPHãþD
SIST EN 50164-5:2009
(OHPHQWL]D]DãþLWRSUHGVWUHOR/3&GHO=DKWHYH]DPHULOQHRPDULFHR]HPOMLO
LQWHVQMHQMHL]RODFLMHSULR]HPOMLOLK
Lightning Protection System Components (LPSC) - Part 5: Requirements for earth
electrode inspection housings and earth electrode seals
Blitzschutzsystembauteile (LPSC) - Teil 5: Anforderungen an Revisionskästen und
Erderdurchführungen
Composants de système de protection contre la foudre (CSPF) - Partie 5: Exigences
pour les regards de visite et les joints d'étanchéité des électrodes de terre
Ta slovenski standard je istoveten z: EN 62561-5:2011
ICS:
91.120.40 =DãþLWDSUHGVWUHOR Lightning protection
SIST EN 62561-5:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62561-5:2011

---------------------- Page: 2 ----------------------

SIST EN 62561-5:2011

EUROPEAN STANDARD
EN 62561-5

NORME EUROPÉENNE
August 2011
EUROPÄISCHE NORM

ICS 29.020; 91.120.40 Supersedes EN 50164-5:2009


English version


Lightning protection system components (LPSC) -
Part 5: Requirements for earth electrode inspection housings and earth
electrode seals
(IEC 62561-5:2011, modified)


Composants de système de protection Blitzschutzsystembauteile (LPSC) -
contre la foudre (CSPF) - Teil 5: Anforderungen an Revisionskästen
Partie 5: Exigences pour les regards de und Erderdurchführungen
visite et les joints d'étanchéité des (IEC 62561-5:2011, modifiziert)
électrodes de terre
(CEI 62561-5:2011, modifiée)





This European Standard was approved by CENELEC on 2011-07-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62561-5:2011 E

---------------------- Page: 3 ----------------------

SIST EN 62561-5:2011
EN 62561-5:2011 - 2 -
Foreword
The text of document 81/391/FDIS, future edition 1 of IEC 62561-5, prepared by IEC TC 81, Lightning
protection, was submitted to the IEC-CENELEC parallel vote.
A draft amendment, prepared by the Technical Committee CENELEC TC 81X, Lightning protection, was
submitted to the formal vote.
The combined texts were approved by CENELEC as EN 62561-5:2011 on 2011-07-28.
This European Standard supersedes EN 50164-5:2009.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2012-07-28
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-07-28
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62561-5:2011 was approved by CENELEC as a European
Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
Whole document
Replace all references to IEC 62305 by references to EN 62305.
Replace all references to IEC 62561 by references to EN 62561.

2 Normative references
Replace the two references by the following
EN 62305 series, Protection against lightning (IEC 62305 series)
EN 62305-3, Protection against lightning – Part 3: Physical damage to structures and life hazard
(IEC 62305-3)

7 Structure and content of the test report
7.1 General
In the first sentence, replace “for laboratory test reports” by "for type test reports issued by the
laboratory”.

---------------------- Page: 4 ----------------------

SIST EN 62561-5:2011
- 3 - EN 62561-5:2011
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 62305 Series Protection against lightning EN 62305 Series


IEC 62305-3 - Protection against lightning - EN 62305-3 -
Part 3: Physical damage to structures and life
hazard

---------------------- Page: 5 ----------------------

SIST EN 62561-5:2011

---------------------- Page: 6 ----------------------

SIST EN 62561-5:2011
IEC 62561-5
®

Edition 1.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Lightning protection system components (LPSC) –
Part 5: Requirements for earth electrode inspection housings and earth
electrode seals

Composants de système de protection contre la foudre (CSPF) –
Partie 5: Exigences pour les regards de visite et les joints d'étanchéité des
électrodes de terre
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX M
ICS 29.020; 91.120.40 ISBN 978-2-88912-558-6

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62561-5:2011
– 2 – 62561-5 © IEC:2011
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements . 6
4.1 General . 6
4.2 Documentation . 7
4.3 Earth electrode inspection housing . 7
4.4 Earth electrode seal . 7
4.5 Marking . 7
5 Tests . 7
5.1 General test conditions . 7
5.2 Earth electrode inspection housing . 8
5.2.1 General . 8
5.2.2 Load test . 8
5.3 Earth electrode seal test . 9
5.4 Marking . 10
6 Electromagnetic compatibility (EMC) . 10
7 Structure and content of the test report . 11
7.1 General . 11
7.2 Report identification . 11
7.3 Specimen description . 11
7.4 Standards and references . 12
7.5 Test procedure . 12
7.6 Testing equipment, description . 12
7.7 Results and parameters recorded . 12
Bibliography . 13

Figure 1 – Test arrangement for load test . 8
Figure 2 – Test arrangement for sealing test . 10

---------------------- Page: 8 ----------------------

SIST EN 62561-5:2011
62561-5 © IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) –

Part 5: Requirements for earth electrode inspection housings
and earth electrode seals


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62561-5 has been prepared by IEC technical committee 81:
Lightning protection.
The text of this standard is based on the following documents:
F
...