SIST EN 16288-1:2014
(Main)Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 3 finish
Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 3 finish
EN 16288-1 specifies the dimensions of the 28 mm screw finish for glass containers designated MCA 3 for pressurized or vacuum liquids for returnable glass.
Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 1: Mehrweg-MCA 3-Mundstück
Diese Europäische Norm legt die Maße des 28-mm-Schraubmundstückes für Mehrweg-Behältnisse aus Glas, bezeichnet mit MCA 3, für Flüssigkeiten unter Über- oder Unterdruck fest.
Emballage en verre - Bague à vis pour capsules à pression - Partie 1: Bague MCA 3 pour verre consigné
La présente Norme européenne spécifie les dimensions de la bague à vis de 28 millimètres pour récipients en
verre consigné contenant des liquides sous pression ou sous vide, désignée sous l'appellation bague MCA 3.
Steklena embalaža - Grla z navojem za steklenice pod tlakom - 1. del: Vračljiva steklena grla MCA 3
Standard EN 16288-1 določa mere za 28-mm grla z navojem za steklene posode MCA 3 za tekočine pod tlakom ali vakuumom za vračljive steklenice.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 1: Mehrweg-MCA 3-MundstückEmballage en verre - Bague à vis pour capsules à pression - Partie 1: Bague MCA 3 pour verre consignéGlass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 3 finish55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 16288-1:2014SIST EN 16288-1:2014en,fr,de01-julij-2014SIST EN 16288-1:2014SLOVENSKI
STANDARD
SIST EN 16288-1:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16288-1
March 2014 ICS 55.100 English Version
Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 3 finish
Emballage en verre - Bagues à vis pour capsules à pression - Partie 1: Bague MCA 3 pour verre consigné
Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 1: Mehrweg-MCA 3-(Glas-)MundstückThis European Standard was approved by CEN on 12 January 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16288-1:2014 ESIST EN 16288-1:2014
EN 16288-1:2014 (E) 2 Contents
Page Foreword .3 Introduction .4 1 Scope .5 2 Terms and definitions .5 3 Dimensions .5 Bibliography . 10
SIST EN 16288-1:2014
EN 16288-1:2014 (E) 3 Foreword This document (EN 16288-1:2014) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2014 and conflicting national standards shall be withdrawn at the latest by September 2014. Attention is drawn to the possibil
...
SLOVENSKI STANDARD
kSIST FprEN 16288-1:2013
01-september-2013
6WHNOHQDHPEDODåD*UOD]QDYRMHP]DVWHNOHQLFHSRGWODNRPGHO 9UDþOMLYD
VWHNOHQDJUOD0&$
Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA
3 finish
Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 1:
Mehrweg-MCA 3-Mundstück
Emballage en verre - Bague à vis pour capsules à pression - Partie 1: Bague MCA 3
pour verre consigné
Ta slovenski standard je istoveten z: FprEN 16288-1
ICS:
55.100 Steklenice. Lonci. Kozarci Bottles. Pots. Jars
kSIST FprEN 16288-1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST FprEN 16288-1:2013
---------------------- Page: 2 ----------------------
kSIST FprEN 16288-1:2013
EUROPEAN STANDARD
FINAL DRAFT
FprEN 16288-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2013
ICS 55.100
English Version
Glass packaging - Screw finishes for pressure capsules - Part 1:
Returnable glass MCA 3 finish
Emballage en verre - Bagues à vis pour capsules à Verpackungen aus Glas - Schraubmundstücke für
pression - Partie 1: Bague MCA 3 pour verre consigné Flaschen mit Innendruck - Teil 1: Mehrweg-MCA 3-(Glas-
)Mundstück
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 261.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 16288-1:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST FprEN 16288-1:2013
FprEN 16288-1:2013 (E)
Contents
Page
Foreword .3
Introduction .4
1 Scope .5
2 Terms and definitions .5
3 Dimensions .5
Bibliography . 10
2
-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.