SIST EN 301 908-2 V5.4.1:2013

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-2 Version 5.4.1SIST EN 301 908-2 V5.4.1:2013en01-februar-2013SIST EN 301 908-2 V5.4.1:2013SLOVENSKI
STANDARD



SIST EN 301 908-2 V5.4.1:2013



ETSI EN 301 908-2 V5.4.1 (2012-12) IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
Harmonized European Standard SIST EN 301 908-2 V5.4.1:2013



ETSI ETSI EN 301 908-2 V5.4.1 (2012-12) 2
Reference REN/MSG-TFES-006-2-2 Keywords 3G, 3GPP, cellular, digital, IMT, mobile, radio, regulation, UMTS, UTRA, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2012. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-2 V5.4.1:2013



ETSI ETSI EN 301 908-2 V5.4.1 (2012-12) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 7 1 Scope . 8 2 References . 9 2.1 Normative references . 9 2.2 Informative references . 9 3 Definitions, symbols and abbreviations . 10 3.1 Definitions . 10 3.2 Symbols . 11 3.3 Abbreviations . 12 4 Technical requirements specifications . 13 4.1 Environmental profile . 13 4.2 Conformance requirements . 13 4.2.1 Introduction. 13 4.2.2 Transmitter maximum output power. 14 4.2.2.1 Definition . 14 4.2.2.1A Definition for DC-HSUPA . 14 4.2.2.2 Limits . 14 4.2.2.3 Limits for DC-HSUPA . 14 4.2.2.3A Conformance. . 15 4.2.3 Transmitter spectrum emission mask . 15 4.2.3.1 Definition . 15 4.2.3.1A Definition for DC-HSUPA . 15 4.2.3.2 Limits . 16 4.2.3.2A Limits for DC-HSUPA . 16 4.2.3.3 Conformance . 16 4.2.4 Transmitter spurious emissions . 17 4.2.4.1 Definition . 17 4.2.4.1A Definition for DC-HSUPA . 17 4.2.4.2 Limits . 17 4.2.4.2A Limits for DC-HSUPA . 18 4.2.4.3 Conformance . 20 4.2.5 Transmitter minimum output power . 20 4.2.5.1 Definition . 20 4.2.5.1A Definition for DC-HSUPA . 20 4.2.5.2 Limits . 20 4.2.5.2A Limits for DC-HSUPA . 21 4.2.5.3 Conformance . 21 4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 21 4.2.6.1 Definition . 21 4.2.6.2 Limits . 21 4.2.6.3 Conformance . 21 4.2.7 Receiver blocking characteristics . 21 4.2.7.1 Definition . 21 4.2.7.2 Limits . 21 4.2.7.3 Conformance . 23 4.2.8 Receiver spurious response . 23 4.2.8.1 Definition . 23 4.2.8.2 Limits . 23 4.2.8.3 Conformance . 24 4.2.9 Receiver intermodulation characteristics . 24 4.2.9.1 Definition . 24 SIST EN 301 908-2 V5.4.1:2013



ETSI ETSI EN 301 908-2 V5.4.1 (2012-12) 4 4.2.9.2 Limits . 24 4.2.9.3 Conformance . 24 4.2.10 Receiver spurious emissions . 25 4.2.10.1 Definition . 25 4.2.10.2 Limits . 25 4.2.10.3 Conformance . 26 4.2.11 Out-of-synchronization handling of output power . 26 4.2.11.1 Definition . 26 4.2.11.2 Limits . 26 4.2.11.3 Conformance . 28 4.2.12 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 28 4.2.12.1 Definition . 28 4.2.12.1A Definition for DC-HSUPA . 28 4.2.12.2 Limits . 28 4.2.12.2A Limits for DC-HSUPA . 28 4.2.12.3 Conformance . 28 5 Testing for compliance with technical requirements . 29 5.1 Environmental conditions for testing . 29 5.2 Interpretation of the measurement results . 29 5.3 Essential radio test suites . 30 5.3.1 Transmitter maximum output power. 30 5.3.1.1 Method of test . 30 5.3.1.1.1 Initial conditions . 30 5.3.1.1.1A Initial conditions for DC-HSUPA . 31 5.3.1.1.2 Procedure . 31 5.3.1.1.2A Procedure for DC-HSUPA . 31 5.3.1.2 Test requirements . 31 5.3.2 Transmitter spectrum emission mask . 31 5.3.2.1 Method of test . 31 5.3.2.1.1 Initial conditions for UEs not supporting HSDPA and/or E-DCH . 31 5.3.2.1.1A Initial conditions for UEs supporting HSDPA and/or E-DCH . 32 5.3.2.1.1B Initial conditions for DC-HSUPA . 32 5.3.2.1.2 Procedure for UEs not supporting HSDPA and/or E-DCH . 32 5.3.2.1.2A Procedure for UEs supporting HSDPA and/or E-DCH . 32 5.3.2.1.2B Procedure for DC-HSUPA . 32 5.3.2.2 Test requirements . 33 5.3.3 Transmitter spurious emissions . 33 5.3.3.1 Method of test . 33 5.3.3.1.1 Initial conditions . 33 5.3.3.1.1A Initial conditions for DC-HSUPA . 33 5.3.3.1.2 Procedure . 33 5.3.3.1.2A Procedure for DC-HSUPA . 33 5.3.3.2 Test requirements . 34 5.3.4 Transmitter minimum output power . 34 5.3.4.1 Method of test . 34 5.3.4.1.1 Initial conditions . 34 5.3.4.1.1A Initial conditions for DC-HSUPA . 34 5.3.4.1.2 Procedure . 34 5.3.4.1.2A Procedure for DC-HSUPA . 34 5.3.4.2 Test requirements . 34 5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 35 5.3.5.1 Method of test . 35 5.3.5.1.1 Initial conditions . 35 5.3.5.1.2 Procedure . 35 5.3.5.2 Test requirements . 35 5.3.6 Receiver blocking characteristics . 35 5.3.6.1 Method of test . 35 5.3.6.1.1 Initial requirements . 35 5.3.6.1.2 Procedure . 36 5.3.6.2 Test requirements . 36 5.3.7 Receiver spurious response . 36 SIST EN 301 908-2 V5.4.1:2013



ETSI ETSI EN 301 908-2 V5.4.1 (2012-12) 5 5.3.7.1 Method of test . 36 5.3.7.1.1 Initial conditions . 36 5.3.7.1.2 Procedure . 36 5.3.7.2 Test requirements . 36 5.3.8 Receiver Intermodulation characteristics . 36 5.3.8.1 Method of test . 36 5.3.8.1.1 Initial conditions . 36 5.3.8.1.2 Procedure . 37 5.3.8.2 Test requirements . 37 5.3.9 Receiver spurious emissions . 37 5.3.9.1 Method of test . 37 5.3.9.1.1 Initial conditions . 37 5.3.9.1.2 Procedure . 37 5.3.9.2 Test requirements . 37 5.3.10 Out-of-synchronization handling of output power . 37 5.3.10.1 Method of test . 37 5.3.10.1.1 Initial conditions . 37 5.3.10.1.2 Procedure . 38 5.3.10.2 Test requirements . 38 5.3.11 Transmitter adjacent channel leakage power ratio . 38 5.3.11.1 Method of test . 38 5.3.11.1.1 Initial conditions for UEs not supporting HSDPA and/or E-DCH . 38 5.3.11.1.1A Initial conditions for UEs supporting HSDPA and/or E-DCH . 38 5.3.11.1.1B Initial conditions for DC-HSUPA . 39 5.3.11.1.2 Procedure for UEs not supporting HSDPA and/or E-DCH . 39 5.3.11.1.2A Procedure for UEs supporting HSDPA and/or E-DCH . 39 5.3.11.1.2B Procedure for DC-HSUPA . 39 5.3.11.2 Test requirements . 39 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 40 Annex B (normative): Environmental profile . 42 B.1 General . 42 B.1.1 Introduction . 42 B.1.2 Temperature . 42 B.1.3 Voltage . 42 B.1.4 Test environment . 43 Annex C (informative): Bibliography . 44 History . 45
SIST EN 301 908-2 V5.4.1:2013



ETSI ETSI EN 301 908-2 V5.4.1 (2012-12) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been produced by ETSI in response to mandate M/284 from the European Commission issued under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.10]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2]. See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.2] are summarised in annex A. The present document is part 2 of a multi-part deliverable covering the essential requirements under article 3.2 of Directive 1999/5/EC [i.2] (R&TTE Directive) for Base Stations (BS), Repeaters and User Equipment (UE) for IMT cellular networks, as identified below: Part 1: "Introduction and common requirements"; Part 2: "CDMA Direct Spread (UTRA FDD) User Equipment (UE)"; Part 3: "CDMA Direct Spread (UTRA FDD) Base Stations (BS)"; Part 4: "CDMA Multi-Carrier (cdma2000) User Equipment (UE)"; Part 5: "CDMA Multi-Carrier (cdma2000) Base Stations (BS)"; Part 6: "CDMA TDD (UTRA TDD) User Equipment (UE)"; Part 7: "CDMA TDD (UTRA TDD) Base Stations (BS)"; Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 11: "CDMA Direct Spread (UTRA FDD) (Repeaters)"; Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 13:
"Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)"; SIST EN 301 908-2 V5.4.1:2013



ETSI ETSI EN 301 908-2 V5.4.1 (2012-12) 7 Part 14:
"Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)"; Part 15:
...