Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirements

This European standard specifies the dimensions and basic requirements for thermal swap bodies of class C. These swap bodies are suitable for international exchange and for conveyance by road and rail including interchange between these forms of transport.

Wechselbehälter - Thermal-Wechselbehälter der Klasse C - Maße und allgemeine Anforderungen

Diese Europäische Norm legt die Maße und die grundlegenden Anforderungen für Thermal-Wechselbehälter der Klasse C fest. Diese Wechselbehälter können für den internationalen Warenverkehr und den kombinierten Verkehr Straße/Schiene einschließlich des Wechsels zwischen diesen Verkehrsträgern eingesetzt werden.

Caisses mobiles - Caisses mobiles a température dirigée de classe C - Dimensions et spécifications générales

La présente norme européenne fixe les dimensions et les prescriptions de base des caisses mobiles à température dirigée de classe C. Ces caisses mobiles sont destinées aux échanges internationaux en transport combiné rail/route et assurent également le transfert entre ces deux modes de transport.

Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirements

General Information

Status
Published
Publication Date
30-Nov-2000
ICS
55.180.10 - General purpose containers
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2000
Due Date
01-Dec-2000
Completion Date
01-Dec-2000
Ref Project
EN 12406:1999 - Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirements

Overview

EN 12406:1999 - Swap bodies: Thermal swap bodies of Class C - Dimensions and general requirements is a CEN standard that defines the basic dimensional specifications and general requirements for Class C thermal swap bodies. These thermal swap bodies are intended for international exchange and for carriage by road and rail, including interoperability when swapping between these transport modes. The standard has been adopted nationally (for example as SIST EN 12406:2000 in Slovenia).

Key Topics

  • Scope and purpose: Establishes consistent dimensions and general design requirements to allow interchangeability and safe international use of Class C thermal swap bodies.
  • Dimensional requirements: Specifies the geometry and overall dimensions necessary for compatibility with intermodal chassis, rail wagons and road vehicles (note: consult the full text for exact dimension tables).
  • Basic construction and interfaces: Defines general requirements for load-bearing structures, mounting/interchange points and interface geometry for reliable coupling and handling.
  • Thermal class identification: Designates these units as Class C thermal swap bodies, intended for insulated/temperature-controlled transport operations.
  • Suitability for intermodal transport: Covers requirements that facilitate safe conveying by both road and rail and enable efficient international exchange.

Applications

EN 12406:1999 is practical for organizations involved in the design, manufacture, procurement, operation and regulation of temperature-controlled intermodal equipment:

  • Swap body manufacturers and designers use the standard to ensure product compatibility and acceptance across European road and rail networks.
  • Logistics and transport operators specify compliance to guarantee interchangeability and reduced handling time during transshipment.
  • Fleet purchasers and leasing companies reference the standard when buying or specifying thermal swap bodies to ensure interoperability.
  • Regulatory bodies and inspection authorities use the standard as a benchmark for safety, dimensions and cross-border acceptance.
  • Cold chain service providers rely on compliant Class C units for refrigerated or temperature-sensitive cargo moved across modes.

Benefits

  • Improves interoperability between road and rail
  • Reduces disputes over compatibility during international exchange
  • Helps streamline procurement and maintenance specifications
  • Supports efficient cold-chain logistics using standardized units

Related Standards (if applicable)

Refer to other CEN and international standards covering intermodal container interfaces, thermal performance testing, and general-purpose swap body specifications to complement EN 12406:1999. National adoptions (e.g., SIST EN 12406:2000) may include local administrative details.

Keywords: EN 12406:1999, thermal swap bodies, Class C, dimensions and general requirements, CEN standard, intermodal transport, road and rail interchange, temperature-controlled transport.

Frequently Asked Questions

SIST EN 12406:2000 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirements". This standard covers: This European standard specifies the dimensions and basic requirements for thermal swap bodies of class C. These swap bodies are suitable for international exchange and for conveyance by road and rail including interchange between these forms of transport.

This European standard specifies the dimensions and basic requirements for thermal swap bodies of class C. These swap bodies are suitable for international exchange and for conveyance by road and rail including interchange between these forms of transport.

SIST EN 12406:2000 is classified under the following ICS (International Classification for Standards) categories: 55.180.10 - General purpose containers. The ICS classification helps identify the subject area and facilitates finding related standards.

You can purchase SIST EN 12406:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirementsWechselbehälter - Thermal-Wechselbehälter der Klasse C - Maße und allgemeine AnforderungenCaisses mobiles - Caisses mobiles a température dirigée de classe C - Dimensions et spécifications généralesSwap bodies - Thermal swap bodies of Class C - Dimensions and general requirements55.180.10General purpose contain
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...