SIST EN 301 908-13 V6.2.1:2014

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-13 Version 6.2.1SIST EN 301 908-13 V6.2.1:2014en01-februar-2014SIST EN 301 908-13 V6.2.1:2014SLOVENSKI
STANDARD



SIST EN 301 908-13 V6.2.1:2014



ETSI EN 301 908-13 V6.2.1 (2013-10) IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA)
User Equipment (UE)
Harmonized European Standard SIST EN 301 908-13 V6.2.1:2014



ETSI ETSI EN 301 908-13 V6.2.1 (2013-10)2
Reference REN/MSG-TFES-010-13 Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, LTE, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-13 V6.2.1:2014



ETSI ETSI EN 301 908-13 V6.2.1 (2013-10)3 Contents Intellectual Property Rights . 7 Foreword . 7 Introduction . 7 1 Scope . 8 2 References . 9 2.1 Normative references . 9 2.2 Informative references . 9 3 Definitions, symbols and abbreviations . 10 3.1 Definitions . 10 3.2 Symbols . 12 3.3 Abbreviations . 14 4 Technical requirements specifications . 15 4.1 Environmental profile . 15 4.2 Conformance requirements . 15 4.2.1 Introduction. 15 4.2.2 Transmitter Maximum Output Power . 16 4.2.2.1 Transmitter maximum output power for Single Carrier . 16 4.2.2.1.1 Definition. 16 4.2.2.1.2 Limits . 16 4.2.2.1.3 Conformance . 16 4.2.2.2 Transmitter output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 16 4.2.2.2.1 Definition. 16 4.2.2.2.2 Limits . 17 4.2.2.2.3 Conformance . 17 4.2.2.3 Transmitter output power for UL-MIMO . 17 4.2.2.3.1 Definition. 17 4.2.2.3.2 Limits . 18 4.2.2.3.3 Conformance . 18 4.2.3 Transmitter Spectrum Emission Mask . 18 4.2.3.1 Transmitter spectrum emission mask for Single Carrier . 18 4.2.3.1.1 Definition. 18 4.2.3.1.2 Limits . 18 4.2.3.1.3 Conformance . 19 4.2.3.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 20 4.2.3.2.1 Definition. 20 4.2.3.2.2 Limits . 20 4.2.3.2.3 Conformance . 20 4.2.3.3 Transmitter spectrum emission mask for UL-MIMO . 21 4.2.3.3.1 Definition. 21 4.2.3.3.2 Limits . 21 4.2.3.3.3 Conformance . 21 4.2.4 Transmitter Spurious Emissions . 21 4.2.4.1 Transmitter spurious emissions for Single Carrier . 21 4.2.4.1.1 Definition. 21 4.2.4.1.2 Limits . 21 4.2.4.1.3 Conformance . 24 4.2.4.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 24 4.2.4.2.1 Definition. 24 4.2.4.2.2 Limits . 24 4.2.4.2.3 Conformance . 25 4.2.4.3 Transmitter spurious emissions for UL-MIMO . 26 SIST EN 301 908-13 V6.2.1:2014



ETSI ETSI EN 301 908-13 V6.2.1 (2013-10)4 4.2.4.3.1 Definition. 26 4.2.4.3.2 Limits . 26 4.2.4.3.3 Conformance . 26 4.2.5 Transmitter Minimum Output Power . 26 4.2.5.1 Transmitter minimum output power for Single Carrier. 26 4.2.5.1.1 Definition. 26 4.2.5.1.2 Limits . 26 4.2.5.1.3 Conformance . 26 4.2.5.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 26 4.2.5.2.1 Definition. 26 4.2.5.2.2 Limits . 27 4.2.5.2.3 Conformance . 27 4.2.5.3 Transmitter minimum output power for UL-MIMO . 27 4.2.5.3.1 Definition. 27 4.2.5.3.2 Limits . 27 4.2.5.3.3 Conformance . 27 4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 27 4.2.6.1 Definition . 27 4.2.6.2 Limits . 28 4.2.6.3 Conformance . 28 4.2.7 Receiver Blocking Characteristics . 29 4.2.7.1 Definition . 29 4.2.7.2 Limits . 29 4.2.7.3 Conformance . 30 4.2.8 Receiver Spurious Response . 31 4.2.8.1 Definition . 31 4.2.8.2 Limits . 31 4.2.8.3 Conformance . 31 4.2.9 Receiver Intermodulation Characteristics . 31 4.2.9.1 Definition . 31 4.2.9.2 Limits . 31 4.2.9.3 Conformance . 32 4.2.10 Receiver Spurious Emissions . 32 4.2.10.1 Definition . 32 4.2.10.2 Limits . 32 4.2.10.3 Conformance . 32 4.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 33 4.2.11.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 33 4.2.11.1.1 Definition. 33 4.2.11.1.2 Limits . 33 4.2.11.1.3 Conformance . 34 4.2.11.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 34 4.2.11.2.1 Definition. 34 4.2.11.2.2 Limits . 35 4.2.11.2.3 Conformance . 35 4.2.11.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 35 4.2.11.3.1 Definition. 35 4.2.11.3.2 Limits . 36 4.2.11.3.3 Conformance . 37 5 Testing for compliance with technical requirements . 37 5.1 Environmental conditions for testing . 37 5.2 Interpretation of the measurement results . 38 5.3 Essential radio test suites . 39 5.3.1 Transmitter Maximum Output Power . 39 5.3.1.1 Transmitter maximum output power for Single Carrier . 39 5.3.1.1.1 Method of test . 39 5.3.1.1.2 Test requirements . 39 5.3.1.2 Transmitter maximum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 40 SIST EN 301 908-13 V6.2.1:2014



ETSI ETSI EN 301 908-13 V6.2.1 (2013-10)5 5.3.1.2.1 Method of test . 40 5.3.1.2.2 Test requirements . 40 5.3.1.3 Transmitter maximum output power for UL-MIMO . 41 5.3.1.3.1 Method of test . 41 5.3.1.3.2 Test requirements . 41 5.3.2 Transmitter Spectrum Emission Mask . 42 5.3.2.1 Transmitter spectrum emission mask for Single Carrier . 42 5.3.2.1.1 Method of test . 42 5.3.2.1.2 Test requirements . 42 5.3.2.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 42 5.3.2.2.1 Method of test . 42 5.3.2.2.2 Test requirements . 43 5.3.2.3 Transmitter spectrum emission mask for UL-MIMO . 43 5.3.2.3.1 Method of test . 43 5.3.2.3.2 Test requirements . 44 5.3.3 Transmitter Spurious Emissions . 44 5.3.3.1 Transmitter spurious emissions for Single Carrier . 44 5.3.3.1.1 Method of test . 44 5.3.3.1.2 Test requirements . 45 5.3.3.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 45 5.3.3.2.1 Method of test . 45 5.3.3.2.2 Test requirements . 46 5.3.3.3 Transmitter spurious emissions for UL-MIMO . 46 5.3.3.3.1 Method of test . 46 5.3.3.3.2 Test requirements . 47 5.3.4 Transmitter Minimum Output Power . 47 5.3.4.1 Transmitter minimum output power for Single Carrier. 47 5.3.4.1.1 Method of test . 47 5.3.4.1.2 Test requirements . 48 5.3.4.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 48 5.3.4.2.1 Method of test . 48 5.3.4.2.2 Test requirements . 49 5.3.4.3 Transmitter minimum output power for UL-MIMO . 49 5.3.4.3.1 Method of test . 49 5.3.4.3.2 Test requirements . 49 5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 50 5.3.5.1 Method of test . 50 5.3.5.1.1 Initial conditions . 50 5.3.5.1.2 Procedure . 50 5.3.5.2 Test requirements . 51 5.3.6 Receiver Blocking Characteristics . 51 5.3.6.1 Method of test . 51 5.3.6.1.1 Initial conditions . 51 5.3.6.1.2 In-Band Procedure . 51 5.3.6.1.3 Out-Of-Band Procedure . 52 5.3.6.1.4 Narrow-Band Procedure . 52 5.3.6.2 Test requirements . 53 5.3.7 Receiver Spurious Response . 53 5.3.7.1 Method of test . 53 5.3.7.1.1 Initial conditions . 53 5.3.7.1.2 Procedure . 53 5.3.7.2 Test requirements . 53 5.3.8 Receiver Intermodulation Characteristics . 53 5.3.8.1 Method of test . 53 5.3.8.1.1 Initial conditions . 53 5.3.8.1.2 Procedure . 54 5.3.8.2 Test requirements . 54 5.3.9 Receiver Spurious Emissions .
...