SIST EN 13859-1:2014
(Main)Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
This European standard specifies the characteristics of flexible sheets for underlays which are to be used under roof covering of discontinuous roofs. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document.
Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 1: Unterdeck- und Unterspannbahnen für Dachdeckungen
Diese Europäische Norm legt die Eigenschaften von Abdichtungsbahnen zur Anwendung als Unterdeck und Unterspannbahnen, die unter der Dachdeckung zu verlegen sind. Sie legt die Anforderungen und Prüfverfahren fest und behandelt die Bewertung der Konformität der Produkte nach den hierin angegebenen Anforderungen.
Feuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 1 : Écrans souples de sous-toiture pour couverture en petits éléments discontinus
La présente norme européenne spécifie les caractéristiques des écrans souples de sous-toiture destinés à être utilisés sous les couvertures en petits éléments discontinus. Elle spécifie les exigences et les méthodes d’essai et prévoit l’évaluation de la conformité des produits aux exigences de la présente norme.
Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 1. del: Podložne folije za strehe
EN 13859-1 določa lastnosti hidroizolacijskih trakov za podložne folije, ki se uporabljajo na strehah. Določa zahteve in preskusne metode ter predvideva vrednotenje skladnosti proizvodov z zahtevami iz tega dokumenta.
General Information
Relations
Overview
EN 13859-1:2014 - published by CEN - defines the definitions, characteristics and conformity requirements for factory-made flexible sheets used as underlays for discontinuous roofing (e.g. under tiles and slates). The standard specifies which product characteristics must be declared, the required test methods, sampling and assessment procedures, and the framework for evaluation of conformity (AVCP) and CE marking under the EU Construction Products Regulation (CPR).
Key topics and technical requirements
- Scope & definitions: covers flexible sheets of plastics, bitumen, rubber or other suitable materials used as underlays for sloping, discontinuous roofs; includes manufacturer-declared and limiting values (MDV, MLV).
- Product characteristics: dimensional stability, thickness, mass per unit area, straightness, application-related characteristics (including the recently added emissivity), and dangerous substances.
- Testing & sampling: procedures for sampling, type testing and routine testing using referenced test methods (examples referenced in the standard include EN 12311-1 for tensile properties, EN 12310-1 for resistance to tearing, EN 1928 for watertightness, EN 1931 for vapour transmission, and EN 1297/1296 for artificial ageing).
- Annexes with methods: normative annexes detail test procedures - tensile properties, tear resistance, artificial ageing (UV/heat), watertightness of seams, and rules for product-type determination and FPC testing frequency.
- Assessment & verification of constancy of performance (AVCP): requirements for type testing, Factory Production Control (FPC) and documentation. Annex ZA maps standard clauses to CPR provisions, and includes guidance for Declaration of Performance (DoP) and CE marking.
- Product information & labelling: requirements for product data sheets, marking, labelling and packaging to support correct selection and installation.
Applications
- Specifies how to assess and declare performance of underlay membranes used beneath tiles, slates and other discontinuous roof coverings.
- Used to determine suitability for moisture control, water tightness, vapour management, mechanical durability and durability to ageing for roof underlays.
- Forms the technical basis for CE marking and placing flexible underlays on the EU market in compliance with CPR.
Who should use this standard
- Manufacturers of flexible roofing underlays (bitumen, plastic, rubber).
- Test laboratories performing type and routine tests for tensile strength, tear resistance, watertightness and ageing.
- Architects, specifiers and roofing contractors selecting compliant underlays for discontinuous roofs.
- Certification bodies and regulatory authorities assessing AVCP, DoP and CE marking compliance.
Related standards (examples)
- EN 12311-1 (tensile properties), EN 12310-1 (tear resistance), EN 1928 (watertightness), EN 1931 (water vapour transmission), EN 15976 (emissivity), EN 13859-2 (underlays for walls).
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 1. del: Podložne folije za streheAbdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 1: Unterdeck- und Unterspannbahnen für DachdeckungenFeuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 1 : Écrans souples de sous-toiture pour couverture en petits éléments discontinusFlexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 13859-1:2014SIST EN 13859-1:2014en,fr,de01-julij-2014SIST EN 13859-1:2014SLOVENSKI
STANDARDSIST EN 13859-1:20101DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13859-1
April 2014 ICS 91.100.50 Supersedes EN 13859-1:2010English Version
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
Feuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 1 : Écrans souples de sous-toiture pour couverture en petits éléments discontinus
Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 1: Unterdeck- und Unterspannbahnen für Dachdeckungen This European Standard was approved by CEN on 16 February 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13859-1:2014 ESIST EN 13859-1:2014
Foreword .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Product characteristics .7 4.1 General .7 4.2 Dimensions, straightness and mass per unit area .7 4.3 Application related characteristics .7 4.4 Dangerous substances .8 5 Testing .9 5.1 Sampling .9 5.2 Test methods .9 6 Assessment and verification of the constancy of performance – AVCP . 11 6.1 General . 11 6.2 Type testing . 11 6.3 Factory production control (FPC) . 12 7 Product data sheet. 16 8 Marking, labelling and packaging . 16 Annex A (normative)
Determination of tensile properties . 18 A.1 General . 18 A.2 Apparatus . 18 A.3 Sampling . 18 A.4 Preparation of test specimens . 18 A.5 Procedure . 18 A.6 Expression and evaluation of results . 19 A.7 Test report . 20 Annex B (normative)
Determination of resistance to tearing . 21 B.1 General . 21 B.2 Apparatus . 21 B.3 Sampling . 21 B.4 Preparation of test specimens . 21 B.5 Procedure . 21 B.6 Expression and evaluation of results . 22 B.7 Test report . 22 Annex C (normative)
Artificial ageing by exposure to UV and heat . 23 C.1 General . 23 SIST EN 13859-1:2014
Product type determination and frequencies of testing for factory production control . 26 Annex E (informative)
Example of a product data sheet . 28 Annex F (normative)
Determination of the watertightness of seams . 30 F.1 General . 30 F.2 Terms and definitions . 30 F.3 Procedure . 30 F.4 Apparatus . 30 F.5 Preparation of the test specimens . 30 F.6 Procedure . 31 F.7 Evaluation. 31 F.8 Test report . 31 Annex ZA (informative)
Clauses of this European Standard addressing provisions of the EU Construction Products Regulation (CPR) . 32 ZA.1 Scope and relevant characteristics . 32 ZA.2 Procedures for AVPC of the flexible sheets for underlays . 33 ZA.2.1 Systems of AVPC . 33 ZA.2.2 Declaration of performance (DoP) . 35 ZA.2.2.1 General . 35 ZA.2.2.2 Content. 36 ZA.2.2.3 Example of DoP . 37 ZA.3 CE marking and labelling. 39 Bibliography . 42
...
Frequently Asked Questions
SIST EN 13859-1:2014 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing". This standard covers: This European standard specifies the characteristics of flexible sheets for underlays which are to be used under roof covering of discontinuous roofs. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document.
This European standard specifies the characteristics of flexible sheets for underlays which are to be used under roof covering of discontinuous roofs. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document.
SIST EN 13859-1:2014 is classified under the following ICS (International Classification for Standards) categories: 91.060.20 - Roofs; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13859-1:2014 has the following relationships with other standards: It is inter standard links to SIST EN 13859-1:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13859-1:2014 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/102. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 13859-1:2014 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...