oSIST prEN 3639:2024

SLOVENSKI STANDARD
oSIST prEN 3639:2024
01-junij-2024
Aeronavtika - Toplotno odporna zlitina X6NiCrTiMoV26-15 (1.4980) - Popuščana in
hladno obdelana - Žice za kovane vezne elemente - D ≤ 15 mm - 900 MPa ≤ Rm ≤
1100 MPa
Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold
worked - Wires for forged fasteners - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Luft- und Raumfahrt - Hochwarmfeste Legierung X6NiCrTiMoV26-15 (1.4980) -
Weichgegluht und kaltverfestigt - Drähte zum Stauchen fur Verbindungselemente - D ≤
15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Série aérospatiale - Alliage résistant à chaud X6NiCrTiMoV26-15 (1.4980) - Adouci et
écroui - Fils pour éléments de fixation forgés - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Ta slovenski standard je istoveten z: prEN 3639
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
oSIST prEN 3639:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3639:2024

---------------------- Page: 2 ----------------------
oSIST prEN 3639:2024
DRAFT
EUROPEAN STANDARD
prEN 3639
NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2024


ICS 49.025.05 Will supersede EN 3639:2021


English Version
Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15
(1.4980) - Softened and cold worked - Wires for forged
fasteners - D ≤ 15 mm - 900 MPa ≤ R ≤ 1 100 MPa
m

Série aérospatiale - Alliage résistant à chaud Luft- und Raumfahrt - Hochwarmfeste Legierung
X6NiCrTiMoV26-15 (1.4980) - Adouci et écroui - Fils X6NiCrTiMoV26-15 (1.4980) - Weichgegluht und
pour éléments de fixation forgés - D ≤ 15 mm - 900 kaltverfestigt - Drähte zum Stauchen fur
Verbindungselemente - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1
MPa ≤ Rm ≤ 1 100 MPa
100 MPa

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMIT É E U R OPÉEN D E NO RMALIS AT ION EU
ROPÄIS CHES K OMITEE F Ü R N OR MU NG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels


© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3639:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3639:2024
prEN 3639:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

------------
...