SIST EN ISO/IEC 7811-4:1998

SLOVENSKI STANDARD
SIST EN ISO/IEC 7811-4:1998
01-junij-1998
Identification cards - Recording technique - Part 4: Location of read-only magnetic
tracks - Tracks 1 and 2 (ISO/IEC 7811-4:1995)
Identification cards - Recording technique - Part 4: Location of read-only magnetic tracks
- Tracks 1 and 2 (ISO/IEC 7811-4:1995)
Identifikationskarten - Aufzeichnungstechnik - Teil 4: Lage der Lesespuren 1 und 2
(ISO/IEC 7811-4:1995)
Cartes d'identification - Technique d'enregistrement - Partie 4: Position des pistes
magnétiques pour lecture uniquement - Pistes 1 et 2 (ISO/IEC 7811-4:1995)
Ta slovenski standard je istoveten z: EN ISO/IEC 7811-4:1996
ICS:
35.240.15 Identifikacijske kartice in Identification cards and
sorodne naprave related devices
SIST EN ISO/IEC 7811-4:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO/IEC 7811-4:1998

---------------------- Page: 2 ----------------------

SIST EN ISO/IEC 7811-4:1998

---------------------- Page: 3 ----------------------

SIST EN ISO/IEC 7811-4:1998

---------------------- Page: 4 ----------------------

SIST EN ISO/IEC 7811-4:1998

---------------------- Page: 5 ----------------------

SIST EN ISO/IEC 7811-4:1998

---------------------- Page: 6 ----------------------

SIST EN ISO/IEC 7811-4:1998
INTERNATIONAL ISO/IEC
STANDARD 7811-4
Second edition
1995-08-I 5
Identification cards - Recording technique -
Part 4:
Location of read-only magnetic tracks -
Tracks 1 and 2
Cartes d ‘iden tifica tion - Technique d’enregistrement -
Partie 4: Position des pistes magnbtiques pour lecture uniquement -
Pistes 7 et 2
Reference number
ISO/lEC 781 l-411 995(E)

---------------------- Page: 7 ----------------------

SIST EN ISO/IEC 7811-4:1998
ISO/IEC 7811=4:1995(E)
Foreword
IS0 (the International Organization for Standardization) and IEC (the
International Electrotechnical Commission) form the specialized system for
worldwide standardization. National bodies that are members of IS0 or
IEC participate in the development of International Standards through
technical committees established by the respective organization to deal
with particular fields of technical activity. IS0 and IEC technical com-
mittees collaborate in fields of mutual interest. Other international organ-
izations, governmental and non-governmental, in liaison with IS0 and IEC,
also take part in the work.
In the field of information technology, IS0 and IEC have established a joint
technical committee, lSO/IEC JTC 1. Draft international Standards adopted
by the joint technical committee are circulated to the member bodies for
voting. Publication as an International Standard requires approval by at
least 75 % of the national bodies casting a vote.
International Standard lSO/IEC 781 l-4 was prepared by Joint Technical
Committee lSO/IEC JTC 1, Information technology, Subcommittee SC 17,
/den tifica tion cards and related devices.
This second edition cancels and replaces the first edition
(IS0 7811-4:1985), of which it constitutes a technical revision.
ISO/IEC 7811 consists of the following parts, under the general title
/den tifica tion cards
- Recording technique:
- Part 7: Embossing
- Part 2: Magnetic stripe
- Part 3: Location of embossed characters on ID-7 cards
- Part 4: Location of read-only magnetic tracks - Tracks I and 2
- Part 5: Location of read-write magnetic tracks - Track 2
0 lSO/IEC 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including protocopying and
microfilm, without permission in writing from the publisher.
lSO/IEC Copyright Office l Case postale 56 l Cl-l-l 211 Geneve 20 l Switzerland
Printed in Switzerland
II

---------------------- Page: 8 ----------------------

SIST EN ISO/IEC 7811-4:1998
ISO/IEC 7811=4:1995(E)
@ lSO/IEC
Introduction
lSO/IEC 7811 is one of a series of standards describing the parameters for
identification cards as defined in clause 4 and the use of such cards for
international interchange.
The recording technique and the coded character sets for track 1, intended
for alphanumeric data, and for track 2, intended for numeric data, are
specified in lSO/IEC 78112.
. . .
III

---------------------- Page: 9 ----------------------

SIST EN ISO/IEC 7811-4:1998
This page intentionally left blank

---------------------- Page: 10 ----------------------

SIST EN ISO/IEC 7811-4:1998
ISO/IEC 7811=4:1995(
...