iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13094:2008/AC:2009

(Corrigendum)

Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction

Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction

TC - Modifications in Subclause A.5.2

Tanks für die Beförderung gefährlicher Güter - Metalltanks mit einem Betriebsdruck von höchstens 0,5 bar - Auslegung und Bau

Citernes destinées au transport de matières dangereuses - Citernes métalliques ayant une pression de service inférieure ou égale à 0,5 bar - Conception et construction

Posode za prevoz nevarnih snovi - Kovinski rezervoarji z delovnim tlakom pod 0,5 bar - Načrtovanje in konstrukcija

General Information

Status
Withdrawn
Publication Date
26-Nov-2008
Withdrawal Date
10-Oct-2011
ICS
13.300 - Protection against dangerous goods
23.020.20 - Vessels and containers mounted on vehicles
Technical Committee
TLP - Pressure vessels
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Oct-2011
Due Date
30-Oct-2011
Completion Date
11-Oct-2011
Directive
94/55/EC - Transport of dangerous goods by road
96/49/EC - Transport of dangerous goods by rail
96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
Mandate
M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
Ref Project
EN 13094:2008/AC:2008 - Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction

Relations

Replaced By
SIST EN 13094:2015 - Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
Effective Date
08-Jun-2022
Corrects
SIST EN 13094:2008 - Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
Effective Date
01-Jan-2009
Replaced By
SIST EN 13094:2008/AC:2010 - Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
Effective Date
01-Nov-2011
Corrects
SIST EN 13094:2008 - Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
Effective Date
08-Jun-2022

Buy Standard

EN 13094:2008/AC:2009EN 13094:2008/AC:2009
PreviousNext
Corrigendum
EN 13094:2008/AC:2009
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tanks für die Beförderung gefährlicher Güter - Metalltanks mit einem Betriebsdruck von höchstens 0,5 bar - Auslegung und BauCiternes destinées au transport de matières dangereuses - Citernes métalliques ayant une pression de service inférieure ou égale à 0,5 bar - Conception et constructionTanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13094:2008/AC:2008SIST EN 13094:2008/AC:2009en,fr,de01-januar-2009SIST EN 13094:2008/AC:2009SLOVENSKI
STANDARD



SIST EN 13094:2008/AC:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13094:2008/ACNovember 2008Novembre 2008November 2008ICS 13.300; 23.020.20English versionVersion FrançaiseDeutsche FassungTanks for the transport of dangerous goods - Metallic tanks with a workingpressure not exceeding 0,5 bar - Design and constructionCiternes destinées au transport de matièresdangereuses - Citernes métalliques ayantune pression de service inférieure ou égaleà 0,5 bar - Conception et constructionTanks für die Beförderung gefährlicherGüter - Metalltanks mit einemBetriebsdruck von höchstens 0,5 bar -Auslegung und BauThis corrigendum becomes effective on 5 November 2008 for incorporation in the three o
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14433:2023(Main)
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves
EN 14433:2023

This European Standard specifies the requirements for foot valves for use on transportable tanks with a minimum working pressure greater than 50 kPa for the transport of dangerous goods by road and rail.
It is applicable to metallic equipment for use on tanks with gravity and/or pressure bottom loading and discharge for liquid chemicals and liquefied gases. It includes carbon dioxide while excluding refrigerated liquefied gases.
NOTE The standard is also applicable to liquefied gases including LPG, however, for a dedicated LPG standard see EN 13175 [3].
.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14432:2023(Main)
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves
EN 14432:2023

This European Standard specifies the requirements for product discharge and air inlet valves for use on transportable tanks with a minimum working pressure greater than 50 kPa for the transport of dangerous goods by road and rail.
NOTE 1 The term 'valve' includes ball valves as well as butterfly valves and similar closure devices.
It is applicable to metallic equipment for use on tanks with gravity and/or pressure filling and discharge for liquid chemicals and liquefied gases. It includes carbon dioxide while excluding refrigerated liquefied gases.
NOTE 2 The standard is also applicable to liquefied gases including LPG, however, for a dedicated LPG standard see EN 13175 [3].

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13922:2020+A1:2022(Main)
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels
EN 13922:2020+A1:2022

This document specifies the following points regarding the minimum requirements for an overfill prevention system:
-   functions;
-   major components;
-   characteristics;
-   test methods.
This document is applicable to overfill prevention systems for liquid fuels having a flash point up to but not exceeding 100 °C, excluding liquefied petroleum gas (LPG).
NOTE   Vapour path detection is not part of this standard but can be provided as an option.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 15120:2022(Main)
Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading
CEN/TR 15120:2022

This document gives guidance and recommendations for loading at terminals and discharge at service stations or customer premises of tank-vehicles transporting dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road [2] - (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.

  • Technical report
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13094:2020+A1:2022(Main)
Tanks for the transport of dangerous goods - Metallic gravity-discharge tanks - Design and construction
EN 13094:2020+A1:2022

This document specifies requirements for the design and construction of metallic gravity-discharge tanks intended for the carriage of substances having a vapour pressure not exceeding 110 kPa (1,1 bar) (absolute pressure) at 50 °C.
NOTE 1   Gravity-discharge tanks have no maximum working pressure. However, during operation, pressure in the shell may occur, for example due to flow restrictions in vapour recovery systems or opening pressures of breather devices. It is important that these operating pressures do not exceed the test pressure of the tank or 0,5 bar, whichever is the highest.
This document specifies requirements for openings, closures, pipework, mountings for service equipment and structural equipment.
NOTE 2   This document does not specify requirements for items of service equipment other than pipes passing through the shell.
This document is applicable to aircraft refuelers that are used on public roads. It is also applicable to inter-modal tanks (e.g. tank containers and tank swap bodies) for the transport of dangerous goods by road and rail.
NOTE 3   This document is not applicable to fixed rail tank wagons.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14025:2018/AC:2020(Corrigendum)
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
EN 14025:2018/AC:2020

This document specifies the minimum requirements for the design and construction of metallic pressure tanks having a maximum working pressure exceeding 50 kPa (0,5 bar), for the transport of dangerous goods by road and rail and sea. This document includes requirements for openings, closures and structural equipment; it does not cover requirements of service equipment. For tanks for the transport of cryogenic liquids, EN 13530 1 and EN 13530 2 apply.
Design and construction of pressure tanks according to the Scope of this document are primarily subject to the requirements of RID/ADR, Subsections 6.8.2.1, 6.8.3.1 and 6.8.5, as relevant. In addition, the relevant requirements of RID/ADR, Table A, columns 12 and 13, to Chapters 3.2, 4.3 and Subsection 6.8.2.4 apply. For the structural equipment RID/ADR, Subsections 6.8.2.2 and 6.8.3.2 apply, as relevant. The definitions of RID/ADR, Subsection 1.2.1, are referred to. For portable tanks see also RID/ADR, Chapter 4.2 and Sections 6.7.2 and 6.7.2. In addition, the relevant requirements of RID/ADR, Table A, Columns 10 and 11 to Chapters 3.2, 4.2, and Sections 6.7.2 and 6.7.3 apply. The paragraph numbers above relate to the 2017 issue of RID/ADR which are subject to regular revisions. This can lead to temporary non-compliances with EN 14025.
This document is applicable to liquefied gases including LPG; however for a dedicated LPG standard see EN 12493.
If not otherwise specified, provisions which take up the whole width of the page apply to all kind of tanks. Provisions contained in a single column apply only to:
tanks according to RID/ADR Chapter 6.8 (left-hand column);   portable tanks according to RID/ADR Chapter 6.7 (right-hand column).

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14564:2019(Main)
Tanks for the transport of dangerous goods - Terminology
EN 14564:2019

This Standard provides additional terms and definitions to those written in the European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR) or the Regulations concerning the International Carriage of Dangerous Goods by Rail (RID), appearing as Appendix C to the Convention concerning International Carriage by Rail (COTIF). This document forms part of series of documents prepared by CEN/TC 296 regarding the transport of dangerous goods. The series supports the proper application of the ADR and RID. This document is applicable to tanks used for the transport of dangerous goods. This document does not apply to carriage in bulk of dangerous goods. For convenience, Annex A (informative) repeats some horizontal definitions taken from ADR 2017 chapter 1.2, and Annex B (informative) repeats some definitions from ADR 2017 chapter 6.7, specific to portable tanks. Annexes C, D and E (informative) provide alphabetical trilingual indexes of terms in English, French and German where the key is English, French and German respectively. Annex F (normative) is a schematic diagram of tank openings and closures according to the tank code.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14596:2018(Main)
Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
EN 14596:2018

This document covers the emergency pressure relief valve.
It specifies the performance requirements and the critical dimensions of the emergency pressure relief valve. It also specifies the tests necessary to verify the compliance of the equipment with this document.
The service equipment specified by this document is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 oC and petrol, and which have no sub-classification as toxic or corrosive.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12972:2018(Main)
Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
EN 12972:2018

This European Standard specifies testing, inspection and marking for the type approval, initial inspection, periodic inspection, intermediate inspection and exceptional check of metallic tanks (shell and equipment) of fixed tanks (tank vehicles), demountable tanks, rail tank wagons, portable tanks and tank containers for the transport of dangerous goods.
This European Standard is not applicable to battery-vehicles and battery-wagons comprising cylinders, tubes, pressure drums, bundles of cylinders and multiple element gas containers (MEGCs), independent of whether the elements are receptacles or tanks.
It is essential that the requirements of the applicable regulations for the transport of dangerous goods prevail in all cases over those of this standard.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16657:2016+A1:2018(Main)
Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks
EN 16657:2016+A1:2018

This European Standard specifies the minimum performance and construction requirements for overfill prevention controllers located on the tank vehicle.
This European Standard applies to overfill prevention controllers for liquid fuels, having a flash point up to but not exceeding 100 °C.
The requirements apply to overfill prevention controllers suitable for use at ambient temperatures in the range from  25 °C to +60 °C, and subject to normal operational pressure variations.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day