SIST HD 467.1.2 S1:2002

SIST HD 467.1.2 S1:2002 is a Slovene standard from SIST for methods of measurement for radio equipment used in satellite earth stations. It covers radio-frequency measurements for transmitting and receiving equipment used in earth stations that communicate through orbiting satellites. The document is part of the measurement series for sub-systems and combinations of sub-systems, and this section focuses on the r.f. range.

What does SIST HD 467.1.2 S1:2002 specify?

SIST HD 467.1.2 S1:2002 specifies measurement methods normally made at radio frequencies for equipment used in satellite earth stations. In practice, it is the reference a test engineer uses when the equipment under test is part of a transmit or receive chain for satellite communication.

The standard is organized as Part 1: Measurements common to sub-systems and combinations of sub-systems, Section 2: Measurements in the r.f. range. That structure tells the reader that the document belongs to a wider measurement family and focuses on radio-frequency work rather than on other parts of the system.

What are the key requirements of SIST HD 467.1.2 S1:2002?

SIST HD 467.1.2 S1:2002 concentrates on measurements that are normally made at radio frequencies. For users, that means the document is relevant whenever equipment performance has to be checked in the r.f. part of the signal path.

• Transmit and receive equipment are both in scope. The standard applies to radio equipment used for transmitting and receiving in earth stations, so it is relevant to both ends of the satellite link.
• The application is satellite earth stations. The document is aimed at equipment installed in earth stations that communicate through orbiting satellites, which fixes the operating environment and use case.
• The measurements are common to sub-systems and combinations of sub-systems. This matters when a test does not apply only to one isolated unit, but to grouped functions or connected equipment.
• The focus is the r.f. range. Users looking for non-r.f. tests would need a different section of the series; this section is for radio-frequency measurement work.
• It is a methods document. The value of the standard is that it gives a common measurement framework, so results can be compared within a project, across suppliers, or across test sites.
• It sits in a larger measurement series. For practical use, readers should treat it as one section of a broader family rather than as a stand-alone description of every satellite earth-station test.

What terms does SIST HD 467.1.2 S1:2002 define?

• r.f. - Radio frequency, the part of the spectrum used for the measurements covered by this section.
• Earth station - A ground-based station used for communication through satellites.
• Transmitting equipment - The equipment path that sends signals from the earth station.
• Receiving equipment - The equipment path that receives signals at the earth station.
• Sub-systems - Functional parts of the overall station equipment that may be measured separately or in combination.
• Orbiting satellites - Satellites in orbit that form the communications link with the earth station.

Who uses SIST HD 467.1.2 S1:2002?

SIST HD 467.1.2 S1:2002 is used by engineers and test personnel working on satellite earth-station radio equipment. It is also relevant to quality teams, laboratory staff, and buyers who need a clear measurement basis when specifying or checking equipment.

Typical users include:

• test and measurement engineers
• satellite earth-station equipment designers
• manufacturers of transmit and receive equipment
• laboratory and quality assurance staff
• procurement teams checking technical test methods

Which standards are used with SIST HD 467.1.2 S1:2002?

The document belongs to the broader Methods of measurement for radio equipment used in satellite earth stations series. Within that series, Part 1 contributes the measurements common to sub-systems and combinations of sub-systems, and Section 2 contributes the measurements in the r.f. range.

What does the SIST HD 467.1.2 S1:2002 document contain?

SIST HD 467.1.2 S1:2002 is a measurement-method standard, so its content is intended for technical test work rather than for product description. The front matter identifies it as the first edition and places it within the satellite earth-station measurement series.

For practical use, the document serves as the reference for radio-frequency measurements on transmitting and receiving equipment used in satellite earth stations. That makes it useful in testing, comparison of results, and the preparation of measurement procedures based on a common standard.