SIST EN 60794-3-60:2009

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]LURPDLichtwellenleiterkabel - Teil 3-60: Außenkabel - Familienspezifikation für Kabel in Trinkwasserleitungen und Schächten für die Verlegung durch Einblasen und/oder Einschieben/Einziehen/Eingleiten in Trinkwasserleitungen (IEC 60794-3-60:2008)Câbles à fibres optiques - Partie 3-60: Câbles extérieurs - Spécification de famille relative aux câbles et sous-conduits cheminant dans les conduites d'eau potable destinés à être installés par soufflage et/ou par tirage/appareillage trainant/flottaison dans les conduites d'eau potable (CEI 60794-3-60:2008)Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes (IEC 60794-3-60:2008)33.180.10Fibres and cablesICS:Ta slovenski standard je istoveten z:EN 60794-3-60:2008SIST EN 60794-3-60:2009en01-februar-2009SIST EN 60794-3-60:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 60794-3-60 NORME EUROPÉENNE
EUROPÄISCHE NORM December 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60794-3-60:2008 E
ICS 33.180.10
English version
Optical fibre cables -
Part 3-60: Outdoor cables -
Family specification for drinking water pipe cables and subducts
for installation by blowing and/or pulling/dragging/floating
in drinking water pipes (IEC 60794-3-60:2008)
Câbles à fibres optiques -
Partie 3-60: Câbles extérieurs -
Spécification de famille
relative aux câbles et sous-conduits cheminant dans les conduites d'eau potable destinés à être
installés par soufflage et/ou
par tirage/appareillage trainant/flottaison dans les conduites d'eau potable (CEI 60794-3-60:2008)
Lichtwellenleiterkabel -
Teil 3-60: Außenkabel -
Familienspezifikation
für Kabel in Trinkwasserleitungen
und Schächten für die Verlegung
durch Einblasen und/oder Einschieben/Einziehen/Eingleiten
in Trinkwasserleitungen (IEC 60794-3-60:2008)
This European Standard was approved by CENELEC on 2008-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

- 2 -
Foreword The text of document 86A/1232/FDIS, future edition 1 of IEC 60794-3-60, prepared by SC 86A, Fibres and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60794-3-60 on 2008-11-01. This standard is to be used in conjunction with EN 60794-1-1, EN 60794-1-2 and EN 60794-3. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2009-08-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-11-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60794-3-60:2008 was approved by CENELEC as a European Standard without any modification. __________

- 3 - EN 60794-3-60:2008 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60304 1982 Standard colours for insulation for low-frequency cables and wires HD 402 S2 1984
IEC 60793-1-20 -1) Optical fibres -
Part 1-20: Measurement methods and test procedures - Fibre geometry EN 60793-1-20 20022)
IEC 60793-1-40 (mod) -1) Optical fibres -
Part 1-40: Measurement methods and test procedures - Attenuation EN 60793-1-40 20032)
IEC 60793-1-44 -1) Optical fibres -
Part 1-44: Measurement methods and test procedures - Cut-off wavelength EN 60793-1-44 20022)
IEC 60793-2 -1) Optical fibres -
Part 2: Product specifications - General EN 60793-2 20082)
IEC 60793-2-50 -1) Optical fibres -
Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 20082)
IEC 60794-1-1 -1) Optical fibre cables -
Part 1-1: Generic specification - General EN 60794-1-1 20022)
IEC 60794-1-2 -1) Optical fibre cables -
Part 1-2: Generic specification - Basic optical cable test procedures EN 60794-1-2 20032)
IEC 60794-3 -1) Optical fibre cables -
Part 3: Sectional specification - Outdoor cables EN 60794-3 20022)
IEC 60794-3-10 (mod) -1) Optical fibre cables -
Part 3-10: Outdoor cables - Family specification for duct and directly buried optical telecommunication cables EN 60794-3-10 20022)
IEC 60811-1-1 1993 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-1: General application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties EN 60811-1-1 1995
1) Undated reference. 2) Valid edition at date of issue.

- 4 -
Publication Year Title EN/HD Year
IEC 60811-5-1 (mod) 1990 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C EN 60811-5-1 1999
IEC 62305-1 -1) Protection against lightning -
Part 1: General principles EN 62305-1 + corr. November
20062) 2006
IEC 60794-3-60Edition 1.0 2008-10INTERNATIONAL STANDARD
Optical fibre cables –
Part 3-60: Outdoor cables – Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes
INTERNATIONAL ELECTROTECHNICAL COMMISSION VICS 33.180.10 PRICE CODEISBN 2-8318-1002-6
– 2 – 60794-3-60 © IEC:2008(E) CONTENTS FOREWORD.4 1 Scope.6 2 Normative references.6 3 Symbols and abbreviations.7 4 Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes (blank detail specification and minimum requirements).8 4.1 Construction.8 4.1.1 General.8 4.1.2 Subducts.8 4.1.3 Drinking water pipe cables.8 4.2 Optical fibres.9 4.2.1 Single-mode dispersion unshifted (B1.1) optical fibre.9 4.2.2 Single-mode dispersion shifted (B2) optical fibre.9 4.2.3 Single-mode non-zero dispersion (B4) optical fibre.10 4.2.4 Single-mode (B6) optical fibre.10 4.2.5 Multimode fibres.10 4.3 Drinking water pipe cable constructions.11 4.3.1 Cable for installation within subducts (previously installed within the drinking water pipe).11 4.3.2 Cable for direct installation into the drinking water pipes.12 4.3.3 Subduct construction.13 4.4 Installation and operating conditions.13 4.4.1 Tests applicable to cables/cable elements.13 4.4.2 Installation conditions.13 4.5 Mechanical and environmental tests.14 4.5.1 Subducts.14 4.5.2 Cable for installation within subducts (previously installed into the drinking water pipes).17 4.5.3 Cables for direct installation into the drinking water pipe.21 Annex A (informative)
Blank detail specification.25 Annex B (informative)
OF cables for drinking water pipes.28 Annex C (informative)
Examples of subducts and drinking water pipe cables.29 Annex D (informative)
Example for installation schemes of optical fibre cables in drinking water pipes (fibre in drinking water pipes).31
Figure C.1 – Examples of constructions of cables for installation in subducts within drinking water pipes.29 Figure C.2 – Examples of constructions for drinking water pipe cables.30 Figure D.1 – Schematic drawing – I/O-port for OF cables into drinking water lines.31 Figure D.2 – Schematic drawing – Installation of OF cables in drinking water lines.32 Figure D.3 – Installation of I/O-ports on high pressure PE drinking water pipe.32
Table 1 – Single-mode dispersion unshifted (B1.1) optical fibre.9 Table 2 – Single-mode dispersion shifted (B2) optical fibre.9 Table 3 – Single-mode non-zero dispersion (B4) optical fibre.10

60794-3-60 © IEC:2008(E) – 3 – Table 4 – Single-mode (B6) optical fibre.10 Table 5 – Characteristics – Cable for installation within subducts.11 Table 6 – Characteristics – Cable for direct installation within the high pressure gas pipe.12 Table 7 – Characteristics – Subduct construction.13 Table 8 – Tests applicable to cables/cable elements.13 Table 9 – Subducts
tests applicable.14 Table 10 – Tests applicable to the cable for installation within subducts.17 Table 11 – Tests applicable to the cables for direct installation into the drinking water pipe.21 Table A.1 – Cable for installation within subducts.25 Table A.2 – Cables for direct installation into the drinking water pipes.26 Table A.3 – Subduct description.27 Table B.1 – OF cables for drinking water pipes.28

– 4 – 60794-3-60 © IEC:2008(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _____________
OPTICAL FIBRE CABLES –
Part 3-60: Outdoor cables –
Family specification for drinking water pipe
cables and subducts for installation by blowing and/or
pulling/dragging/floating in drinking water pipes
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in
...