SIST EN ISO 3262-11:2024
(Main)Extenders - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2024)
Extenders - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2024)
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc in lamellar form associated with carbonates.
Füllstoffe - Anforderungen und Prüfverfahren - Teil 11: Natürlicher, plättchenförmiger, carbonathaltiger Talk (ISO 3262-11:2024)
Dieses Dokument legt Anforderungen und die entsprechenden Prüfverfahren für Produkte aus natürlich vorkommendem, carbonathaltigem Talk in Plättchenform fest.
Matières de charge - Spécifications et méthodes d’essai - Partie 11: Talc naturel, sous forme lamellaire, contenant des carbonates (ISO 3262-11:2024)
Le présent document spécifie les exigences et les méthodes d’essai correspondantes pour les produits préparés à partir de la forme lamellaire du talc d’origine naturelle associé à des carbonates.
Polnila - Specifikacije in preskusne metode - 11. del: Naravni talk v obliki lamel, ki vsebuje karbonate (ISO 3262-11:2024)
Ta dokument določa zahteve in ustrezne preskusne metode za proizvode iz naravnega talka v obliki lamel v povezavi s karbonati.
General Information
Relations
Overview
EN ISO 3262-11:2024 / ISO 3262-11:2024 specifies requirements and test methods for products made from naturally occurring talc in lamellar form containing carbonates (for example dolomite and magnesite associations). This updated standard (superseding the 2000 edition) defines essential and conditional characteristics for talc extenders used in pigments and extenders applications, and prescribes how to test and report conformity.
Key topics and requirements
- Scope and grades: Defines two mineralogical grades (Grade A and Grade B) of natural talc/carbonate materials, illustrated by a ternary diagram.
- Essential requirements (Table 1):
- Talc content: Grade A 90–70% mass; Grade B 70–50% mass (determined by X-ray diffraction or agreement).
- Carbonate content: Grade A 10–30%; Grade B 10–50%.
- Total talc/chlorite content: maximum 90% mass.
- Loss on ignition: Grade A 9.5–19.0% mass; Grade B 11.0–28.6% mass (ISO 3262-1).
- Matter volatile at 105 °C: max 0.5% mass (ISO 787‑2).
- Matter soluble in water: max 0.2% mass (ISO 787‑3).
- pH of aqueous suspension: typically 8–10 (ISO 787‑9).
- Quartz content: max 0.5% mass (XRD).
- Asbestos requirement: no asbestos detectable using combination of XRD and electron microscopy (ISO 14966; SEM/EDX or TEM recommended for morphology and low detection limits).
- Conditional requirements (Table 2):
- Residue on 45 µm sieve (ISO 787‑7 / ISO 787‑18).
- Particle size distribution by laser diffraction (ISO 8130‑13).
- Matter soluble in hydrochloric acid, colour/lightness, resistivity of aqueous extract - to be agreed between parties.
- Test reporting: Reports must identify the product, reference the standard, present methods and results, note deviations or anomalies, and include test dates.
Applications
- Quality specification and acceptance testing for extenders used in:
- Paints and coatings
- Plastics and rubber compounds
- Paper, ceramics and sealants
- Chemical and construction formulations
- Ensures consistent material performance, regulatory compliance (e.g., asbestos detection), and clear procurement criteria for suppliers and buyers.
Who should use this standard
- Manufacturers and suppliers of natural talc extenders
- Quality control and testing laboratories
- Product engineers in paints, plastics and paper industries
- Procurement and compliance teams specifying raw material acceptance
Related standards
- ISO 3262-1 (general test methods)
- ISO 3262-2:2023 (baryte)
- ISO 8130-13 (particle size by laser diffraction)
- ISO 787 series (general methods for pigments and extenders)
- ISO 14966 (inorganic fibrous particle analysis)
- ISO 18451-1 (terminology)
Keywords: ISO 3262-11, EN ISO 3262-11:2024, natural talc, talc containing carbonates, extenders, test methods, particle size distribution, asbestos testing, pigments and extenders.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2024
Nadomešča:
SIST EN ISO 3262-11:2001
Polnila - Specifikacije in preskusne metode - 11. del: Naravni talk v obliki lamel, ki
vsebuje karbonate (ISO 3262-11:2024)
Extenders - Specifications and methods of test - Part 11: Natural talc, in lamellar form,
containing carbonates (ISO 3262-11:2024)
Füllstoffe - Anforderungen und Prüfverfahren - Teil 11: Natürlicher, plättchenförmiger,
carbonathaltiger Talk (ISO 3262-11:2024)
Matières de charge - Spécifications et méthodes d’essai - Partie 11: Talc naturel, sous
forme lamellaire, contenant des carbonates (ISO 3262-11:2024)
Ta slovenski standard je istoveten z: EN ISO 3262-11:2024
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 3262-11
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2024
EUROPÄISCHE NORM
ICS 87.060.10 Supersedes EN ISO 3262-11:2000
English Version
Extenders - Specifications and methods of test - Part 11:
Natural talc, in lamellar form, containing carbonates (ISO
3262-11:2024)
Matières de charge - Spécifications et méthodes d'essai Füllstoffe - Anforderungen und Prüfverfahren - Teil 11:
- Partie 11: Talc naturel, sous forme lamellaire, Natürlicher, plättchenförmiger, carbonathaltiger Talk
contenant des carbonates (ISO 3262-11:2024) (ISO 3262-11:2024)
This European Standard was approved by CEN on 7 January 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3262-11:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 3262-11:2024) has been prepared by Technical Committee ISO/TC 256
"Pigments, dyestuffs and extenders" in collaboration with Technical Committee CEN/TC 298 “Pigments
and extenders” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2024, and conflicting national standards shall be
withdrawn at the latest by July 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3262-11:2000.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 3262-11:2024 has been approved by CEN as EN ISO 3262-11:2024 without any
modification.
International
Standard
ISO 3262-11
Second edition
Extenders — Specifications and
2024-01
methods of test —
Part 11:
Natural talc, in lamellar form,
containing carbonates
Matières de charge — Spécifications et méthodes d’essai —
Partie 11: Talc naturel, sous forme lamellaire, contenant des
carbonates
Reference number
ISO 3262-11:2024(en) © ISO 2024
ISO 3262-11:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 3262-11:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and test methods . 2
5 Test report . 4
iii
ISO 3262-11:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the differe
...
Frequently Asked Questions
SIST EN ISO 3262-11:2024 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Extenders - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2024)". This standard covers: This document specifies requirements and corresponding methods of test for products made from naturally occurring talc in lamellar form associated with carbonates.
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc in lamellar form associated with carbonates.
SIST EN ISO 3262-11:2024 is classified under the following ICS (International Classification for Standards) categories: 87.060.10 - Pigments and extenders. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 3262-11:2024 has the following relationships with other standards: It is inter standard links to SIST EN ISO 3262-11:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN ISO 3262-11:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...