SIST EN 4880:2026

SLOVENSKI STANDARD
01-november-2026
Aeronavtika - Splošna tehnična specifikacija za standardizirane dele
Aerospace series - General technical specification for standard parts
Luft- und Raumfahrt - Allgemeine technische Lieferbedingung für Normteile
Série aérospatiale - Spécification technique générale pour les pièces standard
Ta slovenski standard je istoveten z: EN 4880:2026
ICS:
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4880
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2026
EUROPÄISCHE NORM
ICS 49.035 Supersedes EN 4880:2023
English Version
Aerospace series - General technical specification for
standard parts
Série aérospatiale - Spécification technique générale Luft- und Raumfahrt - Allgemeine technische
pour les pièces normalisées Lieferbedingung für Normteile
This European Standard was approved by CEN on 10 August 2026.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4880:2026 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
4.1 Production engineering . 5
4.2 Materials . 5
4.3 Performance requirements . 5
4.4 Workmanship . 5
4.5 Interchangeability . 5
4.6 Marking . 5
4.7 Protective treatment and surface finish . 5
4.8 Acceptance test report . 6
4.9 Standard ambient test conditions . 6
5 Qualifications and quality assurance provisions . 6
5.1 Approval of manufacturers . 6
5.2 Responsibility for inspection. 6
5.3 Classification of inspections . 6
5.4 Qualification test . 6
5.5 First Article Inspection . 7
5.6 Conformance/Acceptance test . 7
6 Conditions on delivery . 7
6.1 Packaging . 7
6.2 Marking of packages . 7
6.3 Unit and transport packages . 8
Bibliography . 9

European foreword
This document (EN 4880:2026) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2027, and conflicting national standards shall be
withdrawn at the latest by March 2027.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 4880:2023.
— normative references updated;
— Clause 3 “Terms and definitions” editorially revised;
— 4.7 “Protective finish” changed to “Protective treatment and surface finish”;
— 4.8 “Acceptance test report”, reference changed from ISO 16228 to EN 10204.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies the minimum requirements for the qualification, acceptance, delivery and
inspection of standard parts by the aerospace industry and its manufacturers.
This document is applicable to standard parts and their assemblies as described in a product standard, if
mentioned therein. This specification can also be applied to other parts when specifically invoked by the
terms of delivery.
Parts/sections of this document are not applicable in cases where the product standard stipulates
requirements that differ from this specification.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this documen
...