kSIST FprEN ISO 15027-3:2024

SLOVENSKI STANDARD
oSIST prEN ISO 15027-3:2023
01-julij-2023
Potopne obleke - 3. del: Preskusne metode (ISO/DIS 15027-3:2023)
Immersion suits - Part 3: Test methods (ISO/DIS 15027-3:2023)
Schutzkleidung gegen Unterkühlung im Wasser - Teil 3: Prüfverfahren (ISO/DIS 15027-
3:2023)
Combinaisons de protection thermique en cas d'immersion - Partie 3: Méthodes d'essai
(ISO/DIS 15027-3:2023)
Ta slovenski standard je istoveten z: prEN ISO 15027-3
ICS:
13.340.10 Varovalna obleka Protective clothing
oSIST prEN ISO 15027-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 15027-3:2023
oSIST prEN ISO 15027-3:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15027-3
ISO/TC 188/SC 1 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2023-05-03 2023-07-26
Immersion suits —
Part 3:
Test methods
Combinaisons de protection thermique en cas d'immersion —
Partie 3: Méthodes d'essai
ICS: 13.340.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15027-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

oSIST prEN ISO 15027-3:2023
ISO/DIS 15027-3:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15027-3
ISO/TC 188/SC 1 Secretariat: AFNOR
Voting begins on: Voting terminates on:

Immersion suits —
Part 3:
Test methods
Combinaisons de protection thermique en cas d'immersion —
Partie 3: Méthodes d'essai
ICS: 13.340.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 15027-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

oSIST prEN ISO 15027-3:2023
ISO/DIS 15027-3:2023(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Testing of the device .3
4.1 General . 3
4.2 Sampling . 3
4.3 Temperature cycling test . . 3
4.3.1 General . 3
4.3.2 Procedure . 4
4.4 Rotating shock bin test . 4
4.4.1 General . 4
4.4.2 Apparatus . 4
4.4.3 Procedure . 4
4.4.4 Evaluation . . 4
4.5 Tensile strength of seams . 5
4.6 Fuel resistance test . 5
4.7 Buoyancy test . 5
4.7.1 Principle . 5
4.7.2 Apparatus . 6
4.7.3 Procedure . 6
4.7.4 Results . 6
4.8 Suit strength test . 6
4.8.1 Principle . 6
4.8.2 Apparatus . 6
4.8.3 Procedure . 6
4.8.4 Results . 7
4.9 Lifting loop test . 7
4.9.1 Procedure . 7
4.9.2 Results . 8
4.10 Flammability test . 8
4.10.1 Principle . 8
4.10.2 Apparatus . 8
4.10.3 Sampling . 8
4.10.4 Procedure . 9
4.10.5 Evaluation . 9
4.11 Cleaning . 10
4.12 Human test subjects . 10
4.12.1 Instruction and selection . 10
4.12.2 Number and sizes of human test subjects . 10
4.12.3 Gender of human test subjects . 10
4.12.4 Fitness of human test subjects . 10
4.12.5 Dress of human test subjects. 11
4.12.6 Pass/fail criteria . 11
4.13 Leakage measurement. 11
4.13.1 Leakage measurement for jumping . 11
4.13.2 Water ingress measurement for swimming .12
4.14 Thermal test.12
4.14.1 Using a thermal manikin .12
4.14.2 Using human test subjects . 15
4.15 Ergonomic performance testing . 18
4.15.1 General . 18
4.15.2 Donning . 18
iii
oSIST prEN ISO 15027-3:2023
ISO/DIS 15027-3:2023(E)
4.15.3 Walking . 19
4.15.4 Climbing . 19
4.15.5 Dexterity and mobility . 20
4.16 In-water performance and f
...