SIST EN 16565:2014
(Main)Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap
Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap
EN 16565 specifies a method to test the orientation of the flip-top cap on flexible tubes. It is applicable to aluminium, plastic and laminated tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.
Verpackung - Tuben - Prüfmethode zur Bestimmung der Ausrichtung des Klappdeckelverschlusses
Diese Europäische Norm legt ein Verfahren fest, um die Ausrichtung des Klappdeckelverschlusses an Tuben zu prüfen.
Sie gilt für Aluminium-, Kunststoff- und Laminattuben zum Verpacken von Produkten der Pharmazie, der Kosmetik, der Hygiene, von Lebensmitteln und anderen Haushalts- und Industrieprodukten.
Emballage - Tubes souples - Méthodes d'essai pour déterminer l‘orientation de l’obturateur à charnière
La présente Norme européenne spécifie une méthode d'essai visant à déterminer l'orientation des obturateurs à charnière montés sur des tubes souples.
Elle s’applique aux tubes en aluminium, en plastique ou laminés, utilisés pour emballer des produits pharmaceutiques, cosmétiques, alimentaires, des produits d’hygiène et d'autres produits à usage domestique et industriel.
Embalaža - Prožne tube - Preskusna metoda za ugotavljanje orientacije zaskočnega pokrova
Standard EN 16565 določa metodo za preskušanje orientacije zaskočnega pokrova na prožnih tubah. Uporablja se za prožne aluminijaste, plastične in laminirane tube, namenjene pakiranju farmacevtskih, kozmetičnih, higienskih, prehrambenih ter drugih gospodinjskih in industrijskih izdelkov.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.FLMHVerpackung - Tuben - Prüfmethode zur Bestimmung der Ausrichtung des KlappdeckelverschlussesEmballage - Tubes souples - Méthodes d'essai pour déterminer l‘orientation de l’obturateur à charnièrePackaging - Flexible tubes - Test method to determine the orientation of the flip-top cap55.120Cans. Tins. TubesICS:Ta slovenski standard je istoveten z:EN 16565:2014SIST EN 16565:2014en,fr,de01-november-2014SIST EN 16565:2014SLOVENSKI
STANDARD
SIST EN 16565:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16565
August 2014 ICS 55.120 English Version
Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap
Emballage - Tubes souples - Méthode d'essai pour la détermination de l'orientation de l'obturateur à charnière
Verpackung - Tuben - Prüfverfahren zur Bestimmung der Ausrichtung des Klappdeckelverschlusses This European Standard was approved by CEN on 18 July 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16565:2014 ESIST EN 16565:2014
EN 16565:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Test principle and testing equipment .4 3 Execution .5 4 Test report .6 Bibliography .
...
SLOVENSKI STANDARD
oSIST prEN 16565:2013
01-maj-2013
(PEDODåD3URåQHWXEH3UHVNXVQDPHWRGD]DXJRWDYOMDQMHRULHQWDFLMH
]DVNRþQHJDSRNURYD
Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap
Verpackung - Tuben - Prüfmethode zur Bestimmung der Ausrichtung des
Klappdeckelverschlusses
Emballage - Tubes souples - Méthodes d'essai pour déterminer l‘orientation de
l’obturateur à charnière
Ta slovenski standard je istoveten z: prEN 16565
ICS:
55.120 3ORþHYLQNH7XEH Cans. Tins. Tubes
oSIST prEN 16565:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16565:2013
---------------------- Page: 2 ----------------------
oSIST prEN 16565:2013
EUROPEAN STANDARD
DRAFT
prEN 16565
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2013
ICS 55.120
English Version
Packaging - Flexible tubes - Test method to determine the
orientation of the flip-top cap
Emballage - Tubes souples - Méthode d'essai pour la Verpackung - Tuben - Prüfmethode zur Bestimmung der
détermination de l'orientation de l'obturateur à charnière Ausrichtung des Klappdeckelverschlusses
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 261.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16565:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16565:2013
prEN 16565:2013 (E)
Contents Page
Foreword . 3
1 Scope .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.