SIST EN IEC/ASTM 62885-7:2021/A1:2023
(Amendment)Surface cleaning appliances - Part 7: Dry cleaning robots for household or similar use - Methods for measuring the performance (IEC/ASTM 62885-7:2021/A1:2023)
Surface cleaning appliances - Part 7: Dry cleaning robots for household or similar use - Methods for measuring the performance (IEC/ASTM 62885-7:2021/A1:2023)
This part of IEC 62885 is applicable to dry-cleaning robots for household use or under conditions similar to those in households.
The purpose of this document is to specify the essential performance characteristics of dry-cleaning robots that are of interest to
users and to describe methods for measuring these characteristics.
Due to nature of the way this product operates in the home, comparisons with other types of surface cleaning appliances (e.g.
dry vacuum cleaners) should not be made unless otherwise indicated. The cleaning performance methods, in particular, should
only be used to make comparisons with other dry-cleaning robots and not with manually operated vacuum cleaner products.
This document is concerned neither with safety requirements nor with performance requirements.
Geräte zur Oberflächenreinigung - Teil 7: Trocken-Reinigungsroboter für den Hausgebrauch und ähnliche Anwendungen - Verfahren zur Messung der Gebrauchseigenschaften (IEC/ASTM 62885-7:2021/A1:2023)
Appareils de nettoyage des sols - Partie 7: Robots de nettoyage à sec à usage domestique ou analogue - Méthodes de mesure de l'aptitude à la fonction (IEC/ASTM 62885-7:2021/A1:2023)
Naprave za površinsko čiščenje - 7. del: Robotski sesalniki za suho sesanje za gospodinjsko uporabo - Metode za merjenje učinkovitosti - Dopolnilo A1 (IEC/ASTM 62885-7:2021/A1:2023)
General Information
- Status
- Published
- Publication Date
- 15-Mar-2023
- Technical Committee
- FGA - Consumer information related to household electrical appliances
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 07-Mar-2023
- Due Date
- 12-May-2023
- Completion Date
- 16-Mar-2023
Relations
- Effective Date
- 16-Aug-2022
Overview
EN IEC/ASTM 62885-7:2021/A1:2023 (also published as IEC/ASTM 62885-7 with Amendment A1) defines standardized methods for measuring the performance of dry-cleaning robots for household or similar use. Prepared by IEC/TC 59 and adopted by CLC/CENELEC, this document focuses on repeatable, comparable test methods for robotic dry surface cleaners. It specifies what to measure and how to measure it, but does not set safety rules or prescriptive performance pass/fail limits.
Key topics
- Scope and application: Applies to dry-cleaning robots used in homes or similar environments. Important guidance: comparisons should be made only between other dry-cleaning robots - not versus manually operated vacuum cleaners or other surface cleaning appliance types unless explicitly stated.
- Performance characteristics: Defines essential characteristics of interest to users and methods to record them (e.g., cleaning effectiveness, coverage, navigation-related behaviours) - presented as measurement methods rather than regulatory performance thresholds.
- Test bed configuration: Specifies indoor test-bed setups for repeatable testing (see clause references 8.3.2.1 and 9.3). Exception: furniture legs are removed for some tests.
- Carpet testing: Clarifies carpet types and test carpets:
- Preferred international test carpet: Wilton type (for inter-laboratory comparability).
- Additional Category A, B, C carpets (level-loop, tufted/plush, tufted/shag) may be used for in‑house or complementary testing. Test carpet selection must be declared with test results.
- Amendment A1 changes: Clarifies area of application, aligns carpet specifications with IEC 62885-2, and adds Annex D.
- Annex D - Test materials info: Informative guidance on suppliers and verified test-material sources is available on the IEC website (SC 59F supporting documents). This is for convenience and is not an IEC endorsement.
Applications
This standard is practical for:
- Manufacturers developing and validating dry-cleaning robot models (R&D, QA).
- Independent test laboratories conducting reproducible comparative testing.
- Retailers and product managers who need standardized performance data for product specification and marketing (with the caveat on permitted comparisons).
- Procurement teams and consumer organisations seeking objective measurement methods for product evaluation.
- Regulatory and standards bodies referencing harmonized test methods when assessing claims or drafting complementary guidance.
Related standards
- IEC/ASTM 62885 series (other parts such as IEC 62885-2) - carpet and test-material specifications are aligned across parts.
- National and regional adoptions: EN IEC/ASTM 62885-7:2021/A1:2023 (CENELEC/CLC adoption).
Keywords: EN IEC/ASTM 62885-7:2021/A1:2023, dry cleaning robots, surface cleaning appliances, performance measurement, Wilton carpet, test methods, household robots.
Frequently Asked Questions
SIST EN IEC/ASTM 62885-7:2021/A1:2023 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Surface cleaning appliances - Part 7: Dry cleaning robots for household or similar use - Methods for measuring the performance (IEC/ASTM 62885-7:2021/A1:2023)". This standard covers: This part of IEC 62885 is applicable to dry-cleaning robots for household use or under conditions similar to those in households. The purpose of this document is to specify the essential performance characteristics of dry-cleaning robots that are of interest to users and to describe methods for measuring these characteristics. Due to nature of the way this product operates in the home, comparisons with other types of surface cleaning appliances (e.g. dry vacuum cleaners) should not be made unless otherwise indicated. The cleaning performance methods, in particular, should only be used to make comparisons with other dry-cleaning robots and not with manually operated vacuum cleaner products. This document is concerned neither with safety requirements nor with performance requirements.
This part of IEC 62885 is applicable to dry-cleaning robots for household use or under conditions similar to those in households. The purpose of this document is to specify the essential performance characteristics of dry-cleaning robots that are of interest to users and to describe methods for measuring these characteristics. Due to nature of the way this product operates in the home, comparisons with other types of surface cleaning appliances (e.g. dry vacuum cleaners) should not be made unless otherwise indicated. The cleaning performance methods, in particular, should only be used to make comparisons with other dry-cleaning robots and not with manually operated vacuum cleaner products. This document is concerned neither with safety requirements nor with performance requirements.
SIST EN IEC/ASTM 62885-7:2021/A1:2023 is classified under the following ICS (International Classification for Standards) categories: 97.080 - Cleaning appliances. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN IEC/ASTM 62885-7:2021/A1:2023 has the following relationships with other standards: It is inter standard links to SIST EN IEC/ASTM 62885-7:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN IEC/ASTM 62885-7:2021/A1:2023 is associated with the following European legislation: EU Directives/Regulations: 666/2013; Standardization Mandates: M/540. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN IEC/ASTM 62885-7:2021/A1:2023 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2023
Naprave za površinsko čiščenje - 7. del: Robotski sesalniki za suho sesanje za
gospodinjsko uporabo - Metode za merjenje učinkovitosti - Dopolnilo A1
(IEC/ASTM 62885-7:2021/A1:2023)
Surface cleaning appliances - Part 7: Dry cleaning robots for household or similar use -
Methods for measuring the performance (IEC/ASTM 62885-7:2021/A1:2023)
Geräte zur Oberflächenreinigung - Teil 7: Trocken-Reinigungsroboter für den
Hausgebrauch und ähnliche Anwendungen - Verfahren zur Messung der
Gebrauchseigenschaften (IEC/ASTM 62885-7:2021/A1:2023)
Appareils de nettoyage des sols - Partie 7: Robots de nettoyage à sec à usage
domestique ou analogue - Méthodes de mesure de l'aptitude à la fonction (IEC/ASTM
62885-7:2021/A1:2023)
Ta slovenski standard je istoveten z: EN IEC/ASTM 62885-7:2021/A1:2023
ICS:
97.080 Aparati za čiščenje Cleaning appliances
SIST EN IEC/ASTM 62885- en
7:2021/A1:2023
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC/ASTM 62885-7:2021/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2023
ICS 97.080
English Version
Surface cleaning appliances - Part 7: Dry cleaning robots for
household or similar use - Methods for measuring the
performance
(IEC/ASTM 62885-7:2020/AMD1:2022)
Appareils de nettoyage des sols - Partie 7: Robots de Geräte zur Oberflächenreinigung - Teil 7: Trocken-
nettoyage à sec à usage domestique ou analogue - Reinigungsroboter für den Hausgebrauch und ähnliche
Méthodes de mesure de l'aptitude à la fonction Anwendungen - Verfahren zur Messung der
(IEC/ASTM 62885-7:2020/AMD1:2022) Gebrauchseigenschaften
(IEC/ASTM 62885-7:2020/AMD1:2022)
This amendment A1 modifies the European Standard EN IEC/ASTM 62885-7:2021; it was approved by CENELEC on 2023-02-20.
CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC/ASTM 62885-7:2021/A1:2023 E
European foreword
This document (EN IEC/ASTM 62885-7:2021/A1:2023) consists of the text of document
IEC/ASTM 62885-7:2020/AMD1:2022, prepared by IEC/TC 59 "Performance of household and similar
electrical appliances".
The following dates are fixed:
• latest date by which this document has to be (dop) 2024-02-20
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2026-02-20
conflicting with this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN-CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC/ASTM 62885-7:2020/AMD1:2022 was approved by
CENELEC as a European Standard without any modification.
IEC/ASTM 62885-7 ®
Edition 1.0 2022-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
AMENDMENT 1
AMENDEMENT 1
Surface cleaning appliances –
Part 7: Dry cleaning robots for household or similar use – Methods for
measuring the performance
Appareils de nettoyage des sols –
Partie 7: Robots de nettoyage à sec à usage domestique ou analogue –
Méthodes de mesure de l’aptitude à la fonction
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.080 ISBN 978-2-8322-3894-3
– 2 – IEC/ASTM 62885-7:2020/AMD1:2022
© IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SURFACE CLEANING APPLIANCES –
Part 7: Dry cleaning robots for household or similar use –
Methods for measuring the performance
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...