SIST EN 15387:2012
Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam
Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam
This standard specifies methods for the determination of the strength of the side seam of flexible laminate tubes. It is applicable to flexible laminate tubes used for packing pharmaceutical, cosmetic, hygiene, food and other household products.
Packmittel - Laminattuben - Prüfverfahren zur Bestimmung der Festigkeit der Längsnaht
Diese Europäische Norm legt Verfahren zur Beurteilung der Festigkeit der Längsnaht von Laminattuben fest.
Sie gilt für Laminattuben, die für die Verpackung von Produkten der Pharmazie, der Kosmetik, der Hygiene
sowie von Lebensmitteln und anderen Haushaltsprodukten verwendet werden.
Emballage - Tubes souples laminés - Méthodes d'essai pour déterminer la résistence de la soudure longitudinale
La présente Norme européenne spécifie des méthodes d’évaluation de la résistance de la soudure
longitudinale des tubes souples laminés.
Elle s’applique aux tubes souples laminés utilisés pour emballer des produits pharmaceutiques, cosmétiques,
alimentaires, des produits d’hygiène et autres produits de première nécessité.
Embalaža - Prožne laminatne tube - Preskusne metode za ugotavljanje trdnosti stranskih zvarov
Ta evropski standard določa metode za ugotavljanje trdnosti stranskih zvarov prožnih laminatnih tub. Uporablja se za prožne laminatne tube, namenjene pakiranju farmacevtskih, kozmetičnih, higienskih, prehrambenih in drugih gospodinjskih izdelkov.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Embalaža - Prožne laminatne tube - Preskusne metode za ugotavljanje trdnosti stranskih zvarovPackmittel - Laminattuben - Prüfverfahren zur Bestimmung der Festigkeit der LängsnahtEmballage - Tubes souples laminés - Méthodes d'essai pour déterminer la résistence de la soudure longitudinalePackaging - Flexible laminate tubes - Test methods to assess the strength of the side seam55.120Cans. Tins. TubesICS:Ta slovenski standard je istoveten z:EN 15387:2011SIST EN 15387:2012en,fr,de01-marec-2012SIST EN 15387:2012SLOVENSKI
STANDARD
SIST EN 15387:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15387
August 2011 ICS 55.120 English Version
Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam
Emballage - Tubes souples laminés - Méthodes d'essai pour déterminer la résistence de la soudure longitudinale
Packmittel - Laminattuben - Prüfverfahren zur Bestimmung der Festigkeit der Längsnaht This European Standard was approved by CEN on 1 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15387:2011: ESIST EN 15387:2012
EN 15387:2011 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Principle . 4 3 Test equipment for burst test . 4 4 Test operation . 5 4.1 Burst test. 5 4.2 Overlap test . 6 5 Test report . 7
SIST EN 15387:2012
EN 15387:2011 (E) 3 Foreword This document (EN 15387:2011) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn at the latest by February 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.