iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO/IEC 7501-1:1998

(Main)

Identification cards - Machine readable travel documents - Part 1: Machine readable passport (ISO/IEC 7501-1:1993)

Identification cards - Machine readable travel documents - Part 1: Machine readable passport (ISO/IEC 7501-1:1993)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Delays in the PTE dept.

Identifikationskarten - Maschinenlesbare Ausweise - Teil 1: Maschinenlesbarer Paß (ISO/IEC 7501-1:1993)

Cartes d'identification - Documents de voyage lisibles par machine (ISO/IEC 7501-1:1993)

NEW!IEC 62561-1:2017 est disponible sous forme de IEC 62561-1:2017 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L' IEC 62561-1:2017 spécifie les exigences et les essais à appliquer aux composants métalliques de connexion faisant partie d'un système de protection contre la foudre (SPF). Il peut s'agir, typiquement, des connecteurs, des colliers de serrage, des composants de pontage, des pièces d'expansion et des joints de contrôle.
Pour les besoins du présent document, les types de connexions suivants sont considérés comme des composants de connexion: la soudure exothermique et autres procédés de soudage, le brasage, le serrage, le sertissage, l'agrafage, le vissage et le boulonnage. Les essais de composants pour atmosphère explosive ne sont pas concernés par le présent document.
Cette deuxième édition annule et remplace la première édition publiée en 2012. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a. la classification des composants de connexion permanente et non permanente;
b. les exigences et essais correspondants concernant les composants de connexion permanente, par exemple la soudure exothermique et d'autres procédés de soudage, le brasage, le sertissage ou l'agrafage;
c. un organigramme des essais destinés aux composants de connexion.

Identification cards - Machine readable travel documents - Part 1: Machine readable passport (ISO/IEC 7501-1:1993)

General Information

Status
Withdrawn
Publication Date
31-Dec-1997
Withdrawal Date
31-May-2003
ICS
35.240.15 - Identification cards. Chip cards. Biometrics
Technical Committee
BFS - Banking and related financial services
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jun-2003
Due Date
01-Jun-2003
Completion Date
01-Jun-2003
Ref Project
EN ISO/IEC 7501-1:1995 - Identification cards - Machine readable travel documents - Part 1: Machine readable passport (ISO/IEC 7501-1:1993)

Buy Standard

EN ISO/IEC 7501-1:1998EN ISO/IEC 7501-1:1998
PreviousNext
Standard
EN ISO/IEC 7501-1:1998
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO/IEC 7501-1:1998
01-januar-1998
Identification cards - Machine readable travel documents - Part 1: Machine
readable passport (ISO/IEC 7501-1:1993)
Identification cards - Machine readable travel documents - Part 1: Machine readable
passport (ISO/IEC 7501-1:1993)
Identifikationskarten - Maschinenlesbare Ausweise - Teil 1: Maschinenlesbarer Paß
(ISO/IEC 7501-1:1993)
Cartes d'identification - Documents de voyage lisibles par machine (ISO/IEC 7501-
1:1993)
Ta slovenski standard je istoveten z: EN ISO/IEC 7501-1:1995
ICS:
35.240.15 Identifikacijske kartice in Identification cards and
sorodne naprave related devices
SIST EN ISO/IEC 7501-1:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO/IEC 7501-1:1998

---------------------- Page: 2 ----------------------

SIST EN ISO/IEC 7501-1:1998

---------------------- Page: 3 ----------------------

SIST EN ISO/IEC 7501-1:1998

---------------------- Page: 4 ----------------------

SIST EN ISO/IEC 7501-1:1998
I N T E RN AT I O NA L
ISOIIEC
STAN DARD 750111
Second edition
1993-1 2-01
Identification cards - Machine readable
travel documents -
Part 1:
Machine readable passport
Cartes d’identification - Documents de voyage lisibles par machine -
Partie I: Passeport lisible par machine
Reference number
ISO/IEC 7501-1 :I 993(E)

---------------------- Page: 5 ----------------------

SIST EN ISO/IEC 7501-1:1998
ISO/IEC 7501-1 :1993(E)
Foreword
IS0 (the International Organization for Standardization) and IEC (the Inter-
national Electrotechnical Commission) form the specialized system for
worldwide standardization. National bodies that are members of IS0 or
IEC participate in the development of International Standards through
technical committees established by the respective organization to deal
with particular fields of technical activity. IS0 and !EC technical com-
mittees collaborate in fields of mutual interest. Other international organ-
izations, governmental and non-governmental, in liaison with IS0 and IEC,
also take part in the work.
In the field of information technology, IS0 and IEC have established a joint
technical committee, ISO/IEC JTC 1. Draft International Standards adopted
by the joint technical committee are circulated to national bodies for vot-
ing. Publication as an International Standard requires approval by at least
75 YO of the national bodies casting a vote.
International Standard ISO/IEC 7501-1 was prepared by Joint Technical
Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 17,
Identification cards and related devices.
This second edition cancels and replaces the first edition (ISO/IEC 7501-1)
which has been technically revised.
ISO/IEC 7501 consists of the following parts, under the general title Iden-
tification cards - Machine readable travel documents:
- Part I: Machine readable passport
- Part 2: Machine readable visa
Additional parts are currently under development
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1332-5:2006(Main)
Identification card systems - Man-machine interface - Part 5: Raised tactile symbols for differenciation of application on ID-1 cards
EN 1332-5:2006

The scenario addressed by this European Standard is one where the cardholder operates the card accepting equipment (e.g. a cash dispenser, ticket machine, vending machine, mass transportation). It is assumed that the card is a card conforming to ISO/IEC 7810. Increasing use is being made of machine readable plastic cards. However, some potential user groups such as people who are elderly, disabled, blind or visually impaired could have difficulty in using existing card layouts to distinguish between cards with different functions such as a bank, telephone, pre-payment or social security card. This standard addresses the needs of users who have difficulty reading non-embossed information on plastic cards, including persons with special needs, for example older people, minors, disabled people, visually impaired people, those with learning difficulties, first time users, and those not conversant with the local language. The aim of this standard is to specify the design principles necessary for raised tactile symbols to be incorporated into machine readable cards. This proposed standard, in Clause 6, specifies the form, dimensions and location of tactile identifiers for application with ID-1 cards which do not contain other raised symbols. For cards which already contain raised symbols, an alternative system is specified in Clause 7. It is the responsibility of the card issuer to decide which raised symbols to add to identify applications. The alternative system, as specified in Clause 7, should only be used when the system specified in Clause 6 is not suitable (e.g. when the card already contains embossing). Symbols that comply with Clause 7 should be negotiated between cardholder and issuer. Raised symbols could be introduced in multi applications cards only if issuer can assure that each of these applications will still be active during the card life cycle. Annex A specifies the procedure for assigning symbols according to this standard. Raised symbols should only be used on a card after insuring that they will not interfere with the operation of the card (e.g. antenna for contactless card).

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO/IEC 7816-5:2005(Main)
Identification cards -- Integrated circuit cards -- Part 5: Registration of application providers
ISO/IEC 7816-5:2004

ISO/IEC 7816-4 defines how to use an application identifier to ascertain the presence of and/or perform the retrieval of an application in a card.
ISO/IEC 7816-5:2004 shows how to grant the uniqueness of application identifiers through the international registration of a part of this identifier, and defines
the registration procedure,
the authorities in charge thereof,
the availability of the register which links the registered parts of the identifiers and the relevant application providers.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 726-7:2004(Main)
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 7: Security module
EN 726-7:1999

This part of EN 726 specifies :  - the minimum security requirements for a Security Module (SM) ;  - the general card related functions embedded in the SM - terminal protocols including minimum data exchange ; The data elements and cryptographic processing described in annex A for the case where the SM is an ICC should be supported if the SM is not an ICC or the configuration of the system, e.g. where the SM handles more than one terminal/user card.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1332-2:2004(Main)
Identification card systems - Man-machine interface - Part 2: Dimensions and location of a tactile identifier for ID-1 cards
EN 1332-2:1998

This European Standard specifies the form, dimensions and location of an edge indentation for a single standard tactile identifier, when applied to ID-1 cards. This edge indentation will appear at the option of the card issuer.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 726-5:2004(Main)
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 5: Payment methods
EN 726-5:1999

This part of EN726 specifies payment methods for telecommunication applications, using ICcards. These payment methods are not necessarily linked to the applications which use them, and they can be used by more than one application. This part of EN 726 gives guidance on the interface between the ICcard and the external world, using the tools given in EN 726-3:1994 and prEN 726-7. This part of EN726 considers an open system, in which the payment methods will be used. A closed system is a special case of the open system.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 726-3:2004(Main)
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 3: Application independent card requirements
EN 726-3:1994

This part of EN 726 specifies the application-independent characteristics of multi-application IC-cards and plug-in modules for telecommunication applications in order to ensure interoperability for telecommunication cards with the various systems and terminals. Mono-application cards are considered tobe a subset of multi-application cards. All common characteristics, necessary for the interactions between the card and the external world are defined.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1038:1998(Main)
Identification card systems - Telecommunication applications - Integrated circuit(s) card payphone
EN 1038:1995

This European Standard specifies the application dependent, IC card characteristics for a payphone application. This European Standard does not define the application independent characteristics. They are defined and described in EN 726-3 and EN 726-4. This European Standard defines the operating procedures and the minimal cardphone requirements for the card related part of the payphone application.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1387:1998(Main)
Machine readable cards - Health care applications - Cards: General characteristics
EN 1387:1996

This European Standard specifies directly or by reference the requirements for cards used for health care, health care coverage or health care entitlement. This European Standard specifies the physical characteristics of cards and the recording techniques, but not the security requirements. It defines the area on each side of the surface of the card allocated to each type of media.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 726-6:1998(Main)
Identification card system - Telecommunications integrated circuit(s) cards and terminals - Part 6: Telecommunication features
EN 726-6:1995

This part of EN 726 defines telecommunication features using IC cards. These telecommunication features may be used by more than one application. This part of EN 726 describes the card-terminal interface. However, when needed the system is considered as well. This part of EN 726 describes the following telecommunication features: - Abbreviated Dialling; - Last Number Dialling (stored within the card); - Fixed Number Dialling.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1867:1998(Main)
Machine-readable cards - Health care applications - Numbering system and registration procedure for issuer identifiers
EN 1867:1997

This European Standard specifies the application and registration procedures for numbers assignated to issuers of cards used for health care, health care coverage or health care entitlement, that comply with prEN 1387.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day